(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

Application

• Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or Terminal Wiring enclosures.
• Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion may be a problem.

Standards

• UL 508 Type 4 and 12 as marked
• CSA Type 4 and 12
• Complies with
  • NEMA Type 4, 12 and 13
  • JIC EGP-1-1967
  • IEC 529, IP66

If you are looking for Stainless Steel Enclosures, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Corrosion Resistant Enclosure that you are looking for at the lowest prices possible. If you are searching for Stainless Enclosures technical information (data-sheets) please use the Datasheets page link.

(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

Saginaw Control & Engineering's Type 4X Stainless Steel Enclosures are designed to work in a wide range of environments indoors or outdoors, and house electronic controls, instruments, and components. Saginaw NEMA 4X Stainless Steel Enclosures provide protection from corrosion, wind blown dust, rain, spraying water, hose directed water and ice formation on the enclosure.

Features

• 304 stainless steel with #4 brushed finish
• Add the letter "I" to the end of the Push Button Box Part Number to receive the enclosure with 22.5 mm international pushbutton holes
• Exclusive SCE concealed hinges on Enviroline Series Enclosures
• Memory retaining oil resistant urethane gasket
• Any of the standard SCE quarter turn replacement latches and handles can be used on Enviroline Series Enclosures
• Can be custom ordered in 316 stainless steel

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

For many years the TB-Series of Weidmuller Klippon enclosures has proven its worth in rough industrial environments. Here it offers the same technical features as the NexT-Series. The stainless steel versions of this series are recommended for corrosion protection.

• 6 sizes in 2 material versions
• 2 or 4 gland plates
• Lid opens 180°
• Concealed hinges
• Internal/External earthing stud
• Fixing lugs

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

Vynckier APO series enclosures are designed for use as insulated electrical Junction Boxes, terminal wiring boxes, instrument housings, and electrical control enclosures in highly corrosive environments. Ideal for use in most petro-chemical plants, sewage plants, electroplating plants, etc. that may be subject to occasional submersion. Clear polycarbonate cover provides easy visual inspection of interior components. APO sizes range consists of nine sizes from 7 inch x 6 inch to 24 inch x 24 inch with varying depths. All Vynckier AOP enclosures have the capability to be horizontally or vertically coupled by means of gasketed coupling collars.

(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

Sheet Metal Boxes

• SN-Series NEMA
• SNB-Series NEMA
• SNC Series
• NF & NFL Series Fiberglass NEMA Box

(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

The Empire Series have been designed for rugged, industrial, large scale wall mount applications where contractors are looking for an enclosure that is lighter in weight for easier installation and simple to access cabinet doors for easier service capability. Empire enclosures require as little as three snap latches along the side to open for accessible service. This design also covers the sealing requirements to achieve NEMA 4X ratings and rain tight applications.

Empire enclosure sizes range from 36" x 30" x 12" (914mm x 762mm x 305mm) up through 60" x 36" x 16" (1524mm x 914mm x 406.4mm) and come standard with snap latch accessible cabinet doors. Empire wall mount enclosures are manufactured by an RTM (Resin Transfer Molding) process for both their bodies and doors.

Our Stainless Steel Enclosure distributors warehouse in Boise, Idaho stocks some Corrosion Resistant Enclosure Products enabling us to further assist you in finding the correct Stainless Enclosure for your application in the USA, Canada and Mexico. Whether we have Hammond Stainless Steel Enclosures in stock in Boise, Idaho or need to ship direct from factory to any USA cities; Clearwater Tech can get Saginaw NEMA 4X Enclosures to you fast and save money! It will be very helpful if you have the Stainless Steel Enclosure part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Vynckier Polycarbonate Enclosures that you are looking for in seconds. If you do not have the part numbers for Corrosion Resistant Enclosures, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.