(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

SUNX NA2-N series of area sensors provides a general-purpose detection solution with a wide range of sensing heights (140mm - 540mm). They have a 20mm beam pitch and offer a sensing range of up to 5m. With an ultra-slim body of just 13mm, mounting has been greatly simplified. A large 102mm indicator is integrated into both the emitter and receiver for high visibility of output status. Furthermore, the emission frequency can be modified to prevent mutual interference when two sensors are mounted in close proximity with each other. One transistor output is provided (available in PNP or NPN).

If you are looking for SUNX Area Sensors, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the SUNX Area Sensors that you are looking for at the lowest prices possible. If you are searching for SUNX Area Switches technical information (data-sheets) please use the SUNX Data Sheets OR Product Selection Guide page links.

SUNX NA1-5/PK5 series of bin picking sensors is perfect for preventing errors due to incorrect part picking during assembly or packaging operations. Human error is reduced by incorporating a large, bright LED indicator bar that can be configured to illuminate or even blink to show the operator which bin they are supposed to use. Long operation is possible at up to 1.2m; and at only 10mm thick, installation will not obstruct picking operations. Also, mounting up to two sets of sensors side by side is possible without any mutual interference. This is useful for multi-tier shelving units. Lastly, sensor protection brackets are available to eliminate damage due to tools or other objects.

SUNX NA1-11 is an area sensor that utilizes a unique cross-beam detection method to accurately detect small and thin objects. With a wide 100mm sensing height, as well as a 1m length detection distance, this sensor can be used in a wide range of possible applications. The sensor thickness is a mere 10mm, providing simple mounting due to the lack of space necessary for integration. A convenient high visibility, 55mm indicator is integrated on both the emitter and receiver. One transistor output is provided (available in PNP or NPN).

SUNX NA1-PK3 series of bin picking sensors is perfect for preventing errors due to incorrect part picking during assembly or packaging operations. Human error is reduced by incorporating a large, bright LED indicator bar that can be configured to illuminate or even blink to show the operator which bin they are supposed to use. At only 10mm thick and 70mm tall, installation is possible in even the smallest bins. Also, mounting up to three sets of sensors side by side in the same vertical plane is possible without any mutual interference. This is useful for multi-tier shelving units. Lastly, sensor protection brackets are available to eliminate damage due to tools or other objects.

SUNX NA40 series of area sensors offers a simple, cost-effective setup for your wide area detection needs. Its robust yet slim Aluminum Enclosure allows for easy placement on you machine. A built-in interference prevention function even allows for close mounting of two sets of sensors. Its modular design enables modification of the number of beam channels and makes design changes or machine maintenance simple; and, because there is no need for a synchronization wire, the sensor wiring operation is simplified. Also, integrated failure monitoring combats false positives due to dust, dirt, or even a failure to the output transistor. A wide range of sensor heights is available from 120mm to 920mm.

Using a separate control board, each beam channel can be output individually. This is particularly useful for a variety of applications such as discriminating the size of traveling objects, or for sensing their position. A narrow 20 mm (0.787 in) beam pitch offers high sensing performance. It is able to detect a minimum 30 mm (1.181 in) diameter opaque object. SUNX SF1-F series is reduced in volume with only 40% the cross-sectional area of a conventional model.

There are eight types of sensors having a sensing height from 140 mm (5.512 in) (8 beam channels) to 1,260 mm (49.606 in) (64 beam channels). It also has a long sensing range of 7 m (22.966 ft). Channel-check function: When the channel-check input is connected to 0V, the emission of each channel is stopped successively, one at a time. At this time, the corresponding receiver channels generate an output. This is extremely useful for a start-up check. Interference prevention function: It prevents interference between two sensors installed close to each other. Use this function in applications, such as discriminating object size or sensing position of moving objects, where two sensors are mounted adjacently.

Wide sensing area of 7 m x 1260 mm with 20 mm beam pitch. Compared to the conventional model, much smaller objects can be detected so the distance between parts shelf and sensor can be shortened (Enables miniaturization of equipment). Self-diagnosis function: Both the emitter and the receiver automatically check the internal circuit every 5 ms. Should trouble occur in the sensor, the output is forced to the OFF state and the built-in indicator shows the type of error. Also, the emission can be forcibly stopped by an external input to check if the output follows it. It is convenient for an operation check before start-up.

SUNX SF1-N series has been the first to realize modular construction for 20 mm beam pitch area sensors. It allows easy change in the beam channel number. There are eight types of sensors having a sensing height ranging from 140 mm (8 beam channels) to 1,260 mm (64 beam channels). A spatter protection hood type sensor is also available that protects the sensing face against welding spatters.

Our SUNX distributors warehouse in Boise, Idaho stocks some SUNX sensor products (SUNX Area Sensors NA2-N General Purpose Slim Body NA1-PK5 NA1-5 Ultra-Slim Body Picking NA1-PK3 Compact Size Picking NA40 Beam Pitch Area Switches) enabling us to further assist you in finding the correct SUNX Body Picking Sensors for your application in the USA (Alabama Alaska Arizona Arkansas California Colorado Connecticut Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington Washington D.C. West Virginia Wisconsin Wyoming), Canada and Mexico.

Whether we have SUNX Area Sensors in stock in Boise, Idaho or need to ship direct from SUNX to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); www.clrwtr.com can get SUNX Body Picking Sensors to you fast and save money!

It will be very helpful if you have the SUNX Area Sensors part numbers ready, then our sales representatives can provide you with a pricing and availability quote for SUNX Beam Pitch Area Switches that you are looking for in seconds. If you do not have the part numbers for SUNX Compact Picking Sensor, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.