(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

SUNX ER-VW series of ultra-slim, high-performance ionizers performs highly efficient static removal using a high-frequency AC method. This method produces an excellent ion balance ensuring that acts to quickly remove static charge from your work piece. Also, the supplied air pressure or the setup distance does not affect the ion balance, so installation is quick and easy.

The dual nozzle design of SUNX ER-VW incorporates a nozzle angle adjustment feature for optimal placement and targeting of your ion flow. Up to five units can be easily connected together allowing for the use of one air line and power supply for a series of units. Also, with a low air flow minimum or 15 l/min, air usage is much lower than with conventional units.

If you are looking for SUNX Static Ionizers, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the SUNX Electrostatic Sensors that you are looking for at the lowest prices possible. If you are searching for SUNX Ultra-Compact Ionizers technical information (data-sheets) please use the datasheets or product selection guide page links.

An ionizer with a 120 mm 4.724 in fan diameter that has a class leading compact size for reducing workbench clutter and increasing efficiency. Low-volume fan type with a suppressed fan speed of approx. half is available for charge removal in processes which involve handling of small parts or thin films. Just simply replace the louver to change configuration between long distance and wide area ionization. The two louvers come with the ionizer main body. Because the discharge needle unit is attached to the louver, exchange or maintenance of the needles is made easy without touching the main unit. A safe design where once the louver is removed, the highvoltage circuit and the fan will halt.

SUNX ER-V series of ultra-compact, high-performance ionizers performs highly efficient static removal using a high-frequency AC method. This method produces an excellent ion balance ensuring that acts to quickly remove static charge from your work piece. Also, the supplied air pressure or the setup distance does not affect the ion balance, so installation is quick and easy. The body of the ionizer is ultra-small and has the controller built-in. This offers an unparalleled freedom for machine placement where close proximity or narrow space mounting is now possible. Two LED indicators have been incorporated for simple determination of the power and discharge status at a glance.

Direct emission of ionized air removes electrification on charged object swiftly. Instant pulse air emission with high air pressure removes dust all at once. The white LED illuminates on the target object.

This product has been developed / produced for industrial use and it includes precision components, so do not drop it or hit it against other objects. If this is not observed, accidents or problems with operation may occur.

Incorporating Panasonic's unique high-frequency AC method and "Sirocco fan", we have achieved excelling balanced charge removal performance even at slow fan speeds. Particularly well suited to spot charge removal on semiconductor post-processing and electronic component manufacturing equipment, these super compact units immediately solve your problems with static electricity without requiring compressed air. Assembled and disassembled in a single touch, reducing steps required to replace parts or clean filters. Mountable like a sensor in cell workbenches or inside devices.

The ER-TF series is a wide area static ionizer designed for use in cell manufacturingfacilities. It features a built-in fan unit and included AC adaptor allow for a self contained installation without the need of an external power supply or compressed air. This series expands on the current Panasonic ionizer lineup by offering a wide area alternative to the current spot type models, while maintaining the high performancein static charge elimination.

Direct ion emission paired with pulsed air emission provides quick and effective removal of static charges along with any dust that is present on the part. The white LED illuminates the work piece to ensure complete dust removal. A powerful dust collecting fan exhausts dust quickly, preventing re-adhesion of dust.

With SUNX EF-S1 series, it is now possible to perform real-time monitoring of the static electricity levels in your production process, even while the production line is running. Managing static electricity is commonly a difficult task in workplaces where high-density, high-precision electrical equipment is being utilized. Static electricity cannot be seen with the eye, so measurement of surface potentials while the production line is running using SUNX EF-S1 series provides a new way to assess its levels accurately so that it can be constantly managed. The EF-S1 has two detection ranges: +/- 1kV or +/- 2kV. This provides ample room to judge the level at which the target is charged.

Our industrial automation supplies distributors warehouse in Boise, Idaho stocks some SUNX products enabling us to further assist you in finding the correct SUNX Spot Type Static Ionizer for your application in the USA, Canada and Mexico. Whether we have SUNX Ultra-Thin Static Ionizer in stock in Boise, Idaho or need to ship direct from Matsushita Electric Works to any USA cities; Clearwater Tech can get SUNX Pulse Air-gun Ionizer to you fast and save money! It will be very helpful if you have the SUNX Electrostatic Sensor part numbers ready, then our sales representatives can provide you with a pricing and availability quote for SUNX Compact Fan Type Ionizer that you are looking for in seconds. If you do not have the part numbers for SUNX Wide Area Static Ionizer, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.