(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

SUNX LS series of Laser Sensors provides stable sensing for all of your high-precision, long-range application needs. With 6 different sensing heads to choose from, wide beam (200mm), as well as tight beam spot (0.3mm) versions are available for use in a wide array or applications. FDA approved, class 1 and class 2 lasers are available. The coaxial retro-reflective long range sensing head provides sensing at up to 30-meter distances. With the LS series, SUNX has focused their design efforts on creating the most user-friendly laser sensor on the market.

If you are looking for SUNX Laser Sensors, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the LS Series SUNX Digital Laser Sensors that you are looking for at the lowest prices possible. If you are searching for SUNX Laser Sensor technical information (data-sheets) please use the Sunx Datasheets OR Product Selection Guide page links.

To achieve this, four main focal points were addressed:

• Easy Installation

  The sensor heads of the LS series are designed to be approximately the same size as a general-purpose Photoelectric Sensor. The mounting method and pitch (25.4mm) have been carried over as well to allow the LS heads to use existing mounting brackets when replacing a photoelectric sensor with a laser sensor. Thus, assorted mounting brackets are available and are identical to those offered for our photoelectric sensors.

• Easy Adjustment

  Adjustments to the laser beam spot are made simple with a multi-turn trim pot on the rear of the diffuse reflective sensor heads. This allows for on line optimization of the laser beam to best fit the size of the part/feature the user is sensing.

• Easy Operation
  

  The LS series was designed around the popular features of the FX-300 Series Fiber Amplifier. All amplifiers offer two independent transistor outputs (either NPN or PNP). A dual digital display allows for easy determination of the incident value as well as the threshold value at the same time. With a maximum display value of 9999, the LS is stable even at close range, or with a high reflectance target. Also, the incorporation of a user-friendly jog-dial simplifies operation and maintenance. Beginners and advanced users alike will benefit from the intuitive programming and operation, thus, keeping the learning curve to a minimum.

  • Mode NAVI: Six easy-to-see indicators surround the main display allowing quick and easy confirmation of the operating mode, as well as easy navigation through mode settings.
  • Key Lock Function: The key lock function is a very useful feature in avoiding accidental changes to the sensor settings. The jog switch as well as the mode button is disabled to prevent any unwanted modifications.
  • Simple Wiring: Quick connection cables enable wiring reductions be allowing up to 16 sensor to be connected to each other. Up to four sensors can be combined with interference prevention while at work in close proximity with each other. In addition, the LS series can also be connected to the FX-300 series fiber optic sensor.
  • External Input: The built-in cable type amplifier, LS-401(P)-C2, is equipped with external input wiring that allows for external teaching as well as laser emission cutoff functions to be carried out remotely.
    
    
• High Performance

  The functions built in to the LS series contribute to its high-performance status. An integrated M.G.S. function allows for the user to adjust the receiving sensitivity to one of three levels based on the reflectivity or transparency of the target object. In addition, three specialized sensing modes have been integrated to make complex sensing methods simple:

  • Hysteresis Mode: Allows adjustment of the hystersis value that assists in stable sensing of uneven or rough parts.
  • Window Comparator Mode: Utilizes two threshold values to determine if a part is within a high and low limit.
  • Differential Sensing Mode: Will detect only sharp changes in the incident light level. This is useful when the light output is slowly being hindered by dust build-up on the sensor head.

SUNX LA series of laser collimated beam sensors is a safe and precise solution to your detection needs. Utilizing an FDA approved class 1 laser diode, extra protective measures are not required. The wide sensing area of 15mm x 500mm, coupled with a 10 micron repeatability, provides ample precision and range for most positioning or detecting applications. Versatile mounting options are also available, such as the side view attachment for tight mounting conditions. Laser alignment has been simplified by using four LED indicators to determine correct axial positioning. The LA-C1 controller offers a simple digital display along with an auto-reference function and two operation modes: Hystersis mode and window comparator mode.

SUNX LD series of Laser Edge Detection Sensors offers high-accuracy measurement using a red semiconductor laser and CCD receiver combination. Both are mounted to the same body ensuring accurate alignment out of the box. The laser element is available in either a class 1 or 2 type. Stable sensing over a long period of time has been achieved by integrating a shade correction function that compensates for any receiver sensitivity variation and generates a uniform sensitivity distribution. Four sensing methods are available including edge and width measurements in either light or dark mode.

SUNX LM10 series of laser displacement sensors provides a low cost displacement solution while maintaining high-precision. With up to a 1 micron resolution and a +/- 0.2% F.S. linearity, the LM10 does not give up ability for price. Class 1 or 2 laser diodes are available and in addition to one analog output (voltage or current), a discrete comparator is built-in as well (single or window). Nine sensor heads are available from the high-resolution ANR1250 (1 micron) to the long range ANR1226 (250 +/- 150mm measuring range).

With the accumulated know-how in measurement technology together with the newest digital technology, SUNX has developed the industry's cutting edge HL-C2 series to attend to every need from short to mid sensing range. Small beam spot works best for minuscule sensing objects such as connector leg pins or limited measuring positions. Linear beam spot is best suited for metal's cutting surface or surface that has patterns which may cause diffuse reflection. Selecting a suitable sensor may be difficult depending on the surface of the object. Even under such conditions, with just one sensor head setup mode can be selected while assuring stable sensing operation.

SUNX HL-C1 series of laser displacement sensors provides a high-speed, stable measurement solution for a wide variety of applications. Its compact design significantly reduces the needed installation space, all while including capability for two sensor heads, and an integrated RS-232C port for communication with a PC. An available touch-screen console unit provides a convenient panel mount solution that allows for full control of the controller's settings. Because two heads can be used at once, thickness measurements have never been easier. The HL-C1 series also incorporates many useful functions, including hold functions, calculation functions, filter functions, and a hysteresis setting function that facilitate simple usage across numerous applications.

SUNX HL-T1 series of laser collimated beam sensors combines extremely compact sensor heads with a high-functionality intelligent controller. Three sensor heads are available from the long-range, small beam width HL-T1001(A/F) to the wide beam HL-T1010(A/F). All are available in a class 1 or FDA approved class 2 laser. With a 4-micron resolution and an 8-micron minimum object diameter, the HL-T1 series offers incredibly high precision for positioning and measurement applications. An optional side-view attachment provides ease and simplicity in mounting the sensor head.

SUNX HL-T1 controller features an easy to see dual Digital Display with a convenient four-key layout for simple control. Three types of teaching functions have been integrated including: single level, two level and fully automatic teaching. Using the optional HL-AC1-CL calculation unit, two sensors can be connected together to enable addition or subtraction functions. This is perfect for applications such as sheet width measurement. The analog output is selectable between current or voltage and HI/LO/GO outputs are integrated as well (available as PNP or NPN).

Our SUNX distributors warehouse in Boise, Idaho stocks some SUNX Laser Sensor products (SUNX LS Series Digital Laser Sensors Distributors) enabling us to further assist you in finding the correct SUNX Laser Sensors for your application in the USA (Alabama Alaska Arizona Arkansas California Colorado Connecticut Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington Washington D.C. West Virginia Wisconsin Wyoming), Canada and Mexico.

Whether we have SUNX Laser Sensors in stock in Boise, Idaho or need to ship direct from SUNX to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); www.clrwtr.com can get SUNX Digital Laser Sensor to you fast and save some money!

It will be very helpful if you have the SUNX Laser Sensor part numbers ready, then our sales representatives can provide you with a pricing and availability quote for SUNX Digital Laser Sensors that you are looking for in seconds. If you do not have the part numbers for SUNX Laser Sensors, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.