SymCom's Model 231-Insider-P single-phase PumpSaver Plus fits inside 1/3, 1/2, 3/4, and 1hp 230V control boxes and is designed to protect single-phase pumps from dry-well, dead-head, jammed impeller, rapid-cycle, overvoltage, and undervoltage conditions.
A calibration adjustment allows the Insider-P to be calibrated to specific pumping applications, thereby reducing the possibility of false or nuisance tripping.
A unique microcontroller-based voltage and current-sensing algorithm constantly monitors the incoming power for fluctuations. When an abnormality, such as a loss of load is detected, the PumpSaver Plus deactivates its output relay directly disconnecting the pump motor.
If you are looking for SymCom 231-INSIDER-P PumpSaver, please call us on (800) 894 - 0412 or email us at firstname.lastname@example.org we will do our best to help you find the 231-INSIDER-P 1-phase pump saver that you are looking for at the most competitive prices possible. If you are searching for 231-INSIDER-P single-phase pumpsaver plus technical information (data-sheets) please use the datasheets or product selection guide page links.
The PumpSaver Plus then begins its user-selectable restart delay (dry-well recovery) timer. When the timer counts down to zero or power is removed and reapplied, the PumpSaver Plus reactivates its output relay, allowing the pump to turn back on.
The 231-Insider-P communicates with a hand-held diagnostics tool called the Informer (sold separately). The Informer displays 15 parameters including calibration points, trip points, running points, and last faults. An IR Kit-12 (12" fiber optic kit) is included with each 231-Insider-P, allowing the Informer to access these parameters even when the 231-Insider-P is enclosed in a control box. This is valuable for troubleshooting the pump while it is running.
The PumpSaver Plus models have a sensitivity adjustment for the dry-well trip point. After calibration is done, you can adjust the sensitivity for the dry-well/dead-head trip point from 70-90% of the full load. This makes the unit even more adaptable to varying pumping applications. If you have a very low producing well, you increase the sensitivity closer to the 90% mark, or if you have a very heavy producing well, you would decrease the sensitivity around the 70% mark.
The 231-Insider-P is approved by UL for use in the Franklin, Pentek and CentriPro type 3R control boxes when installed properly. It is not intended to provide overload protection and should be used with thermally or impedance protected motors only.
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some SymCom products enabling us to further assist you in finding the correct 231-INSIDER-P pumpsaver for your application in the Pacific Northwest USA.
We can proudly say that we carry more SymCom/SSAC/Littelfuse in stock than any other SymCom distributors in the Pacific Northwest region. Whether we have model 231-INSIDER-P 1-phase pumpsaver in stock in Boise, Idaho or need to get them from SymCom; Clearwater Tech can get 231-INSIDER-P single-phase pumpsaver plus to you fast and save money!
It will be very helpful if you have the SymComp pumpsaver part numbers ready, then our sales representatives can provide you with a pricing and availability quote for 231-INSIDER-P pumpsaver that you are looking for in seconds.
If you do not have the part numbers for SymCom 1-phase pumpsavers, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
The Electronic Timer from the BT product range offers ideal solutions for industrial applications. Using the central button, you can select the functions of the modules over either 4 or 8 time ranges. The multi-voltage supply range offers a wide bandwidth for industrial use. The time range is chosen by turning the rotary switch for the ON-time scale and OFF-time scale. The time scales are visible
The S5K Series modular is scalable from 4 to 20 kVA, offering many flexible options by adding a few standard modules. Designed to be fully configured, tested and shipped in the configuration you need, the 5K Modular also has the ability to be easily upgraded in the field to either higher VA ratings (up to 20 kVA maximum), longer back-ups or to add N+x parallel redundancy. Configurations can be cost-effectively