Clearwater Tech Logo

SymCom

Home   >   Products   >   Littelfuse   >   601 &   >   601-575   >   Voltage Monitors

SymCom

SymCom's Model 601 is a fully programmable electronic voltage monitor designed to monitor three-phase voltage systems. When a harmful condition is detected, the MotorSaver's output relay is deactivated after the specified trip delay.

SymCom 601 Three-Phase Voltage Monitors Distributors

Models 601

Installation Instructions

The output relay reactivates after power line conditions return to an acceptable level for the programmed amount of restart delay time (RD2).

The Model 601 can be used as a stand-alone product or the communication port can be used to form a network and monitor the motors with a SymCom remote monitor and/or SCADA, PLC, or PC.

If you are looking for SymCom 601 Voltage Monitors, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the 601 voltage monitor that you are looking for at the most competitive prices possible. If you are searching for 601-575 voltage monitor technical information (data-sheets) please use the datasheets or product selection guide page links.

Features:

  • Protects 3-phase motors from:
    • Loss of any phase (single-phasing)
    • Phase reversal
    • Low voltage
    • High voltage
    • Voltage unbalance
    • Low frequency
    • High frequency
    • Rapid cycling
  • Built-in 3-digit display for programming, real-time information and diagnostics
  • Programmable voltage and frequency settings/parameters
  • Programmable restart control (adjustableautomatic restart or manual restart)
  • Reset pushbutton (and optional remote resetpushbutton)
  • 2 each separate programmable trip delay timersand restart delay timers
  • Last four faults (with characteristics) available via3-digit display, network or remote displays
  • RS-485 Modbus network communications
  • Optional remote displays aid in complying witharc-flash safety regulations
  • UL and cUL listed
  • 5-year warranty
  • Made in USA

SymCom 601-575 Three-Phase Voltage Monitor Distributor

Models 601-575

SymCom's Model 601-575 is a fully programmable electronic voltage monitor designed to monitor three-phase voltage systems. When a harmful condition is detected, the MotorSaver's output relay is deactivated after the specified trip delay. The output relay reactivates after power line conditions return to an acceptable level for the programmed amount of restart delay time (RD2).

The Model 601-575 can be used as a stand-alone product or the communication port can be used to form a network and monitor the motors with a SymCom remote monitor and/or SCADA, PLC, or PC.

It can be used with an optional RS-485 module allowing up to 99 Model 601, Model 777, or Model 77C units to be linked together. From the computer, an operator can control the motor, view the operating parameters, or log information. Software sold separately.

The following 11 parameters can be viewed from the three digit LED display or from a networked computer: low voltage setpoint, high voltage setpoint, voltage unbalance setpoint, low frequency setpoint, high frequency setpoint, trip delay for voltage/frequency faults, trip delay for single-phase faults, Rapid Cycle Timer (RD1), Restart Delay after all faults (RD2), type of restart after all faults (Manual or Automatic), and RS485 address. Six parameters can be viewed as the motor is running: L1-L2 voltage L2-L3 voltage, L1-L3 voltage, average voltage, percent voltage unbalance, and frequency.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some SymCom products enabling us to further assist you in finding the correct model 601 three phase voltage monitor for your application in the Pacific Northwest USA. We can proudly say that we carry more SymCom/SSAC/Littelfuse in stock than any other SymCom distributors in the Pacific Northwest region.

Whether we have model 601-575 3-phase voltage monitors in stock in Boise, Idaho or need to get them from SymCom; Clearwater Tech can get 601 voltage monitor to you fast and save money!

It will be very helpful if you have the SymCom 601-575 voltage monitors part numbers ready, then our sales representatives can provide you with a pricing and availability quote for 601 3-phase voltage monitor that you are looking for in seconds.

If you do not have the part numbers for SymCom 601-575 three-phase voltage monitors, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check

Part No:
OR
Manufacturer:

Search Tips
Can't find a part number?
E-mail Us!

LEESON Reducers

Grove Gear offers a complete line of high efficiency gearing products including helical-bevel reducers. System operating efficiency is maximized with gear reducer efficiencies up to 95%. In many cases, high efficiency gear products can do the same job as a conventional worm drive, but with a smaller motor and lower energy consumption. All Grove Gear high efficiency gearing products offer decreased motor power requirements, no thermal limitations,

Red Lion Meters

Twelve Timing Ranges are available from thousandths of a second to hours and minutes. Decimal Points are used to separate the time units (hours, minutes, seconds). Timing can be cumulative or can reset and start upon each power cycle. "On Delay" or "Off Delay", "Single Shot", "Repetitive auto cycling" modes are all supported. The C48 Timer has a Run/Stop Input, 3 programmable User Inputs, and a programmable front panel function key.