ALT-24-S
ALT-24-S-SW
ALT-115-S
ALT-115-S-SW
June 03, 2011

Kubler Encoders

The Incremental Miniature Encoders type 2400 / 2420 with their optical sensor technology offer a resolution of up to 1024 PPR. With a diameter of just 24 mm this encoder is ideal for use where space is tight. Thanks to their non-contact magnetic scanning technology the miniature-format encoders 2430 and 2440 guarantee exceptional ruggedness - and this with a resolution of up to 256 pulses per revolution. As a result of their compact outer diameter of only 24 mm,

IDEC Relay

The "Hockey Puck" Style RSS Series of solid state relays allow switching of the most demanding loads. Highly resistant to inrushes, with a built-in snubber, the RSS series is ideal for switching loads such as lights and heaters. Available with either DC (4-32V) or AC (90-280V) inputs with output current ratings up to 90A. All models feature zero-voltage turn-on to reduce inrush current and a dual SCR switch (rather than a triac) for enhanced reliability and superior

SymCom

Loading

Home   >   Products   >   SSAC   >   Alternating Relays

SymCom

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

SymCom Model ALT MotorSaver Alternating Relays Distributors
Model ALT

SymCom Model ALT alternating relays are used to alternate between two loads. The ALT is commonly used in duplex pumping applications to balance the runtime of both pumps. The Model ALT-S is used in single high level float applications. When the float switch opens, the alternating relay changes state forcing the other pump to run the next time the float closes.

The Model ALT-X has an internal cross-connected relay and is used in applications where two high level floats are used. These floats are commonly referred to as lead and lag floats. The lead float causes the relay to change state each time it opens (identical to the float in the ALT-S application).

If you are looking for SymCom Alternating Relays, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the SymCom Model ALT-200-3-SW that you are looking for at the most competitive prices possible. If you are searching for SymCom Model ALT-200-1-SW Alternating Relays technical information (data-sheets) please use the datasheets or product selection guide page links.

SymCom Model ALT-100-1-SW & ALT-200-1-SW Alternating Relays Distributor
Model ALT-100-1-SW & ALT-200-1-SW

Alternating relays are used to alternate between two loads and are commonly used in duplex pump-up and pump-down applications to balance the runtime of both pumps.

The ALT-xxx-1-SW alternating relays are 11-pin octal base plug-ins, available in two different single-phase voltage ranges. The ALT-100-1-SW is used for 95-120VAC applications and the ALT-200-1-SW is used for 190-240VAC applications. Both models are designed for a single float input and feature two isolated Form C relays (DPDT) outputs with two LEDs to indicate the energized load.

SymCom Model ALT-100-3-SW & ALT-200-3-SW Alternating Relays Distributors
Model ALT-100-3-SW & ALT-200-3-SW

The ALT-xxx-3-SW alternating relays are 8-pin octal base plug-ins, available in two different single-phase voltage ranges. The ALT-100-3-SW is used for 95-120VAC applications and the ALT-200-3-SW is used for 190-240VAC applications. Both models are designed for three float inputs (lead, lag and stop floats). The lead and lag floats actuate latching relays that release when the stop float actuates. The units feature two LEDs to indicate the energized load(s).

The ALT relays have a built-in debounce time delay that prevents the relay from changing state if the float momentarily bounces, and they have a built-in switch to manually force a specific load (pump) to operate each time the input float closes.

SymCom Model 50R-400-ALT MotorSaver Microcontroller Based Alternating Relays Distributor
Model 50R-400-ALT

SymCom Model 50R-400-ALT alternating relays are used to alternate between two loads, most commonly in duplex pumping and compressor applications to balance the runtime of both loads. When used in single float applications, the alternating relay changes state after the float switch opens*, forcing the other pump to run the next time the float closes. When used in dual float applications, the alternating relay will allow both pumps to run simultaneously when the lead and lag floats are both closed.

Our industrial automation supplies distributors warehouse in Boise, Idaho USA stocks some MotorSaver products enabling us to further assist you in finding the correct SymCom Model ALT-230-X in the USA, Canada and Mexico. Whether we have ALT-230-X-SW alternating relays in stock in Boise, Idaho USA or need to ship direct from SymCom to any USA cities; Clearwater Tech can get ALT-100-1-SW alternating relay to you fast and save you some money! It will be very helpful if you have the SymCom ALT-200-1-SW part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Model ALT-100-3-SW alternating relay that you are looking for in seconds. If you do not have the part numbers for MotorSaver 50R-400-ALT, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

ALT-115-X
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

ALT-115-X-SW
ALT-230-S
ALT-230-S-SW
Clearwater Tech   © 2011 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY SITE INDEX