Clearwater Tech Logo


Home   >   Products   >   Supco   >   Auxiliary Products


SymCom also provides current transformers, timers, and much more. Looking to upgrade or improve an existing product? SymCom specializes in the design and manufacture of custom controllers, which are an integration of many electrical or electronic components into a more condensed, feature rich product.

SymCom RM-1000-ENCL Enclosures for RM-1000 Remote Monitor Distributors


Installation Instructions

The RM-1000-ENCL is a steel enclosure for protecting a SymCom RM-1000 remote communications monitor from adverse affects of weather and vandalism, while allowing normal communications connections to the RM-1000 unit. Its superior design protects an RM-1000 from overexposure to UV sunlight as well as from hail during a storm, and it incorporates a seal around the opening in the back to seal the unit to the electrical box, keeping rain from contacting the RM-1000 connections.

The enclosure unit mounts using the same hardware supplied with the RM-1000 unit. The steel enclosure also features a built-in padlock tab (padlock not included) to lock the cover to deter vandalism. The RM-1000-ENCL is sold separately from the RM-1000 remote communications monitor.

If you are looking for SymCom Auxiliary Products, please call us on (800) 894 - 0412 or email us at we will do our best to help you find the 601CS-D-P1 3-phase power monitor that you are looking for at the most competitive prices possible. If you are searching for metal NEMA-3R electrical box technical information (data-sheets) please use the datasheets or product selection guide page links.

SymCom NEMA 3R-L Electrical Enclosure Distributor


The NEMA 3R-L enclosure is a metal electrical box that meets the National Electrical Manufacturers Association's standard for a 3R enclosure (rain proof).

The NEMA 3R-L box can house several different single-phase SymCom PumpSaver models.

It has two clear lenses on the cover for viewing the LEDs on the PumpSaver, allowing the customer to determine the units operational status.

The NEMA 3R-L is sold separately or in conjunction with the single-phase SymCom PumpSaver models.

SymCom 601CS-D-P1 3-Phase Power Monitors Distributors


3-phase Power Monitor is a fully programmable electronic power monitor designed to monitor 3-phase systems. The 601-CS-D-P1 has a single relay that can be configured as a general purpose network output or to trip on ground faults. The 601-CS-D-P1 monitors ground fault current, phase currents, phase voltages, power factor and frequency. The RS485MS-2W communications module allows the 601-CS-D-P1 to communicate using the Modbus RTU protocol. The Modbus connection can be used to monitor power parameters, setup the device or control the fault relay. A DeviceNet Communications I/O module (CIO-601CS-DN-P1) is available as well.

SymCom Informer Diagnostic Tool for Single-Phase PumpSaver & PumpSaver Plus Distributor


The Informer is a handheld diagnostic tool designed for use with single-phase PumpSaver and PumpSaver Plus models equipped with infrared LED transmitters.

The Informer uses an infrared receiver to access information sent from the PumpSaver or PumpSaver Plus, which can be helpful for troubleshooting the system.

Each SymCom single-phase PumpSaver and PumpSaver Plus model, equipped with an infrared LED, transmits valuable information from the device.

To retrieve this information, the Informer's receiver must be directed toward the PumpSaver's LED transmitter and be within 10 feet of the unit (12" if using IR Kit).

The green COMM STATUS light indicates when the Informer is receiving data from the PumpSaver or PumpSaver Plus.

SymCom M-500 Electronic Megohmmeters Distributors


An inexpensive alternative to expensive taut band (swing needle) megohmmeters, the M500 provides fast and accurate measurements to verify the condition of insulation.

The Model M-500 is an automatic, portable, battery-powered insulation tester.

This unit is specifically designed as an inexpensive alternative to costly swing needle megohmmeters.

The M-500 measures insulation resistance values of motors, generators and transformers up to 1000 megohms at 500VAC, indicating the condition of insulation on the zone scale.

Its compact design and ease of use makes the M-500 a great diagnostic tool for motor rewind shops, electrical maintenance personnel and pump installers.

SymCom IR Kit-12 & IR Kit-36 Informer IR Kit Distributor

Informer IR Kit

Can be used with the MotorSaver Model 455 and PumpSaver Models 111-Insider-P and 231-Insider-P.

It simply attaches to the face of the unit to provide remote diagnostics without opening the panel.

The use of flow restrictors, unusually high head pressures, or low water conditions at the time of calibration may interfere with the detection of dead-head and dry-well conditions.

The Model 111-Insider-P single-phase PumpSaver Plus fits inside 1/3 and 1/2 hp 115V control boxes.

Part Numbers: IR Kit-12 (12" long) & IR Kit-36 (36" long)

SymCom OL-RESET Modules Distributors


Allows the 777 line of MotorSaver and PumpSaver products to be manually reset without opening the panel door.

Simply connect the module to the 777 communication port, connect a wire to each of the two applicable pins on the OL-RESET and to a normally-open push-button switch (sold separately).

Mount the push-button switch in a convenient location.

The Model 777-P2 Series is a family of fully programmable electronic overload relays.

SymCom Informer-MS Handheld Diagnostic Tool Distributor


The Informer-MS is a handheld diagnostic tool designed for use with MotorSaver Model 455s equipped with infrared LED transmitters.

In March 2006, an infrared LED transmitter was added to all MotorSaver Model 455 units to communicate with the Informer MS.

The Informer-MS uses an infrared receiver to access information sent from the MotorSaver, which can be helpful formonitoring and troubleshooting the system.

To retrieve this information, the Informer's receiver must be directed toward the MotorSaver's LED transmitter.

The green COMM STATUS light indicates when the Informer-MS is receiving data from the MotorSaver.

If communication is lost, the Informer will display the last values it received. The part number for the infrared kit is Informer MS IR Kit and is available at a nominal cost.

SymCom 777 Manual Remote Reset Kit (24" long) Distributors

777 Manual Remote Reset Kit

Allows the 777 line of MotorSaver and PumpSaver products to be manually reset without opening the panel door.

Simply connect the 9-pin adapter to the 777 communication port and mount the reset switch in a convenient location.

Part Number: 777-MRSW

SymCom 777 Manual Remote Reset Kit (24" long) Distributors

Octal Sockets

For 8-pin plug-in units.

Part Numbers: OT08-PC (surface & DIN rail mountable) & RB08-PC (surface mountable)

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some SymCom products enabling us to further assist you in finding the correct model M-500 insulation tester for your application in the Pacific Northwest USA. We can proudly say that we carry more SymCom/SSAC/Littelfuse in stock than any other SymCom distributors in the Pacific Northwest region. Whether we have SymCom RM-1000-ENCL steel enclosure in stock in Boise, Idaho or need to get them from SymCom; Clearwater Tech can get Informer IR kit to you fast and save money! It will be very helpful if you have the Informer & Informer-MS handheld diagnostic tool part numbers ready, then our sales representatives can provide you with a pricing and availability quote for OL-RESET module that you are looking for in seconds. If you do not have the part numbers for SymCom 777 Manual Remote Reset Kit, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check

Part No:

Search Tips
Can't find a part number?
E-mail Us!

ABB Breakers

Selective Main Circuit Breakers are for overload and short-circuit protection in electrical installations. They offer total selectivity to downstream mcbs and outstanding selectivity to upstream protective devices due to unique current limiting selectivity. The S500 and S800 are high-performance circuit breakers for overload and short circuit protection for electrical equipment. Due to to the wide range of rated current

NK Technologies Switches

ASX Series current sensing switches are high performance current sensing switches with field-adjustable time delay to help minimize nuisance trips during start-up and operation. Designed for motor status applications where setpoint accuracy and repeatability are critical, the ASX series offers a linear setpoint characteristic and constant hysteresis. Standard features include self-powering,