March 18, 2011
IDEC Timers
The GT5Y Series is
single function On-Delay timer with 5A DPDT or 3A 4PDT contacts. Blade plug in type with time ranges up to 60 minutes. All
electronic timer modules are manufactured under IDEC's rigorous quality control system, but users must add a backup or fail safe
provision to the control system when using the electronic timer in applications where heavy damage or personal injury may occur
should the electronic timer fail.
|
Red Lion Timers
One Shot ON-Delay (Signal Start)
means when voltage is applied to the coil, the preset time is initiated and the contacts remain in the off state for the preset
time. Following the preset time, the contacts transfer to the on state, and remain in the on state until the start input is
supplied. Following the start input, the contacts transfer to the off state for the preset time. After the preset time has elapsed,
the contacts transfer back to the on state.
|
|
|
|
 |
(800) 894-0412 (888) 723-4773 (Fax)
info@clrwtr.com |
TA Series |
TA Series Lockout Timer
- Prevents rapid recycling of compressor in air conditioning, refrigeration, and heat pump equipment
- Lockout delay begins when thermostat opens or when there is a loss of power
- Low Voltage Brownout Protection - Prevents start of compressor when input voltage is low
- 12 VDC, 24 VDC, 24VAC With Circuitry to Activate the Cooling Anticipator
- Fixed Delays of 0.5, 2, 3, or 5 minutes
- 1A Steady, 10A Inrush Solid State Output
- Totally Solid State and Encapsulated
- Eliminates nuisance service calls due to blown fuse or tripped breakers
- 2 X 2 X 1.21 In. (50.8 X 50.8 X 30.7 mm)
- 0.85 in. (9.14mm) Male Quick Connect Terminals
- UL Recognized and CSA Certified - (24V Models Only)
|
|
If you are looking for SymCom HVAC Controls, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com
we will do our best to help you find the SSAC Lockout Timer that you are looking for at the most competitive prices possible. If you
are searching for SymCom Fan Delay Timer technical information (data-sheets) please use the datasheets or product selection
guide page links.
|
T2D Series |
T2D Series Lockout Timer with Random Start Delay or Delay on Make Timing
- Lockout Delay - Prevents Rapid Recycling of Compressor in Air Conditioning, Refrigeration, and Heat Pump Equipment.
(The delay begins when the thermostat opens.)
- Random Start Delay - Helps Prevent Low Voltage Starting Caused by Momentary Overloading of the Supply Lines when power
is applied.
- Delay on Make Timer - Optional Two Terminal Series Connection.
- Totally Solid State 1 Amp Rated Output
- 24VAC to 230VAC in 2 Ranges
- Encapsulated to Protect Against Shock, Vibration, and Humidity
- UL Recognized, CSA Certified, U.S. Patent # 5809793
|
TL Series |
TL Series - Anti-Short Cycle Lockout Timer
- Lockout Delay - Prevents Rapid Recycling of Compressor in Air Conditioning, Refrigeration, and Heat Pump Equipment.
(Delay begins when the thermostat opens or when there is a loss of power.)
- Optional 1 Second Delay-On-Energization Prevents Contactor Chatter
- Totally Solid State and Encapsulated
- 24, 120, or 230VAC Models are Available
- 0.5A Steady, 10A Inrush Rated Output
- Encapsulated to Protect Against Shock, Vibration, and Humidity
- UL Recognized and CSA Certified
|
TAC1 Series |
TAC1 Series - Anti-Short Cycle Delay on Make
- UL Recognized for Air Conditioning and Refrigeration Equipment
- Fixed or Adjustable Delays from 50 Milliseconds to 10 Minutes
- 24, 120, or 230VAC Models are Available
- Totally Solid State and Encapsulated
- Failsafe Design Eliminates Contactor Chatter Problem
- Analog Circuitry +/-2% Repeat Accuracy
- +/-20% Factory Calibration for Greater Economy
- UL Recognized and CSA Certified
|
TAC4 Series |
TAC4 Series - Bypass Delay Timer
- UL Recognized for Air Conditioning and Refrigeration Equipment
- Fixed or Adjustable Delays from 50 Milliseconds to 5 Minutes
- 24, 120, or 230VAC Models are Available
- Totally Solid State and Encapsulated
- Failsafe Design Eliminates Contactor Chatter Problem
- Analog Circuitry +/-2% Repeat Accuracy
- +/-20% Factory Calibration for Greater Economy
- UL Recognized, CSA Certified, CE
|
CT Series |
CT Series Fan Delay
- Delay on Make and Delay on Break in one unit
- Use for fan delays in heating or cooling equipment
- Use for multiple load sequencing
- Fixed time delays of 1 to 600 seconds in 1 second increments
- 24VAC input voltage
- 0.75A steady, 5A inrush
- Totally solid state and encapsulated
- 2 x 2 x 1.21 In. (50.8 x 50.8 x 30.7mm)
- 0.25 In (6.35 mm) male quick connect terminals
- UL Recognized and CSA Certified
|
|
Our industrial automation supplies distributors warehouse in Boise, Idaho USA stocks some Lockout Timer
products enabling us to further assist you in finding the correct Timer with Random Start Delay in the USA, Canada and
Mexico. Whether we have Delay on Make Timing HVAC Controls in stock in Boise, Idaho USA or need to ship direct from SSAC to
any USA cities; Clearwater Tech can get Anti-Short Cycle Lockout Timer to you fast and save you some money! It will be very
helpful if you have the Bypass Delay Timer part numbers ready, then our sales representatives can provide you with a pricing
and availability quote for Fan Delay Timer that you are looking for in seconds. If you do not have the part numbers for
HVAC/R Controls, our application engineers will be able to help you figure out the part numbers and get the price quote to
you as soon as possible.
|
|
|
|
 |
|
| Part Number: |
|
|
Can't find a part number?
E-mail Us! |
|
|
