SymCom

Home   >   Products   >   MotorSavers   >   1-Phase Voltage Monitors

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

SymCom Model 50R Single Phase Voltage Monitor has a voltage sensing circuit which constantly monitors the single phase power for a low voltage condition. Single phase motors on fans, compressors, air conditioners, heat pumps, well pumps, sump pumps, and small conveyor motors are all applicable to the Model 50R.

When a harmful condition is detected, the MotorSaver's output relay is deactivated after a specified trip delay.

If you are looking for SymCom Single-Phase Voltage Monitors, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the SymCom 460-100-SP that you are looking for at the most competitive prices possible. If you are searching for 460-200-SP Voltage Monitor technical information (data-sheets) please use the datasheets or product selection guide page links.

The Model 201-xxx-SP is an 8-pin octal base plug-in voltage monitor designed to protect single-phase motors regardless of size. It can be used on 95-120VAC (201-100-SP) or 190-240VAC (201-200-SP) motors to prevent damage caused by low voltage. High voltage detection is included on the 201-200-SP-T-9 model.

The unique microcontroller-based voltage and voltage-sensing circuit constantly monitors the voltage to detect harmful power line conditions. When a harmful condition is detected, the MotorSaver's output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to an acceptable level and a specified amount of time has elapsed (restart delay). The trip delay prevents nuisance tripping due to rapidly fluctuating power line conditions.

As With All SymCom 3-Phase Voltage Monitors, our new 201-100-DPDT protects against regenerative voltages by detecting small voltage unbalances. The 201-200-DPDT family of products has a fixed 6% voltage unbalance trip point making them better than the NEC standard of 8%. The 201-100-SP-DPDT is used to prevent damage caused by incoming voltage problems, including regenerative voltages. It is a 11-pin octal base plug-in 3-phase voltage monitor that features two isolated Form C relay outputs and is ideal for use with two control circuits with different voltages.

DPDT products allow one set of relay contacts to control/protect a motor, while the second set of contacts can be used for an alarm circuit operating on a different voltage. Typically the control contacts would switch 115VAC control circuit, while the alarm contacts would switch a 24VDC circuit monitored by a PLC or other low voltage equipment.

The Model 202-200-SP is a voltage monitor designed to protect single-phase motors regardless of size. It is used on 190-240VAC, 50/60Hz motors to prevent damage caused by low voltage or high voltage.

A unique microcontroller-based voltage sensing circuit constantly monitors the single-phase voltage to detect harmful power line conditions. When a harmful condition is detected, the 202-200-SP's output relay is deactivated after a fixed trip delay. The output relay reactivates after power line conditions return to an acceptable level and a specified amount of time has elapsed (restart delay). The trip delay prevents nuisance tripping due to rapidly fluctuating power line conditions.

The Model 202-200-SP-NHV is a voltage monitor designed to protect single-phase motors regardless of size. It is used on 190-240VAC, 50/60Hz motors to prevent damage caused by low voltage.

A unique microcontroller-based voltage sensing circuit constantly monitors the single-phase voltage to detect harmful power line conditions. When a harmful condition is detected, the 202-200-SP-NHV's output relay is deactivated after a fixed trip delay. The output relay reactivates after power line conditions return to an acceptable level and a specified amount of time has elapsed (restart delay). The trip delay prevents nuisance tripping due to rapidly fluctuating power line conditions.

SymCom Model 460-XXX-SP protects single-phase motors from damage caused by low and high voltage and rapid cycling. Controls are provided to set the nominal voltage (190-240VAC) and the desired restart delay time (1-500 sec.). A unique microcontroller-based, voltage-sensing circuit constantly monitors the voltage to detect harmful power line conditions.

When a harmful condition is detected, the MotorSaver's output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to an acceptable level for a specified amount of time (restart delay). The restart delay is also a power-up delay and can be utilized stagger-start motors on the same system. The trip delay prevents nuisance tripping due to rapidly fluctuating power line conditions.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some SymCom products enabling us to further assist you in finding the correct MotorSaver 50R-400-3 in the USA, Canada and Mexico. Whether we have 50R-400-2-9 voltage monitor in stock in Boise, Idaho USA or need to ship direct from SymCom to any USA cities; Clearwater Tech can get SymCom 201-100-SP to you fast and save you some money! It will be very helpful if you have the 201-200-SP voltage monitors part numbers ready, then our sales representatives can provide you with a pricing and availability quote for 201-200-SP-T-9 1-phase voltage monitor that you are looking for in seconds. If you do not have the part numbers for SymCom 202-200-SP, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.