 |
(800) 894-0412 (208) 368-0415 (Fax) info@clrwtr.com |
 SymCom Voltage Monitor Model 80 |
SymCom Model 80 is designed to continuously monitor phase rotation of 3-phase systems.
Critical applications include fan motors, scroll compressors, grinders, conveyor systems, elevators and escalators. A
solid-state sensing circuit drives an internal Electro-Mechanical Relay which is
energized when proper phase rotation is applied. An LED indicator illuminates when phase rotation is correct. Reset is
automatic.
|
|
If you are looking for SymCom Voltage Monitors, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com we
will do our best to help you find the SymCom 3-Phase Voltage Monitors that you are looking for at the lowest prices possible. If you are
searching for SymCom Three-Phase Voltage Monitor technical information (data-sheets) please use the
SymCom Datasheets OR
Product Selection Guide page links.
|
 SymCom Voltage Monitor Model 102A |
SymCom Model 102A is an auto-ranging voltage monitor designed to protect
3-Phase Motors regardless of size. It is used on 190-480VAC, 50 or 60Hz motors to prevent
damage caused by incoming power problems. A unique microcontroller-based voltage and phase-sensing circuit constantly monitors
the 3-phase voltages to detect harmful power line conditions. When a harmful condition is detected, the MotorSaver's output
relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to
acceptable levels. The Model 102A includes advanced single LED diagnostics. Five different light patterns distinguish between
faults and normal conditions.
|
 SymCom Voltage Monitor Model 102LG |
SymCom Model 102LG is a line to ground voltage monitor. It is used on 190-480VAC, 50 to
60Hz motors to prevent damage caused by low voltage conditions from line to ground.
|
 SymCom Voltage Monitor Model 201A |
SymCom The Model 201A is an auto-ranging voltage monitor designed to protect 3-phase
motors regardless of size. It is used on 190-480VAC, 50 or 60Hz motors to prevent damage caused by incoming power problems.
|
 SymCom Voltage Monitor Model 201A-AU |
SymCom Model 201A-AU is the newest, most versatile, plug-in style voltage monitor designed
to protect 3-phase motors from damaging power conditions. Its wide operating range combined with UL, cUL and CE compliance
enables quick access to domestic and global markets. The Model 201A-AU automatically senses whether it is connected to a
190-240V, 60Hz system, a 440-480V, 60Hz system, or a 380-416V, 50Hz system. An adjustment is provided to set the nominal line
voltage from 190-240 or 380-480VAC. Other variable settings include a 1-30 second trip delay, manual or 1-500 second restart
delay, and 2-8% voltage unbalance trip point.
|
 SymCom Voltage Monitor Model 202 |
SymCom Model 202 is an auto-ranging voltage monitor designed to protect 3-phase motors
regardless of size. It is used on 190-480 VAC, 50 or 60Hz motors to prevent damage caused by incoming power problems. The Model
202-RP trips on reverse phase only. It monitors the phase rotation of 3-phase systems. Critical applications include Fan Motors,
scroll compressors, grinders, conveyor systems, elevators and escalators. The status light turns green and the relay is
activated when rotation is correct.
|
 SymCom Voltage Monitor Model 250A |
SymCom Model 250A is an auto-ranging voltage monitor designed to protect 3-phase motors
regardless of size. It is used on 190-480VAC, 50 or 60Hz motors to prevent damage caused by incoming power problems.
|
 SymCom Voltage Monitor Model 350 |
SymCom Model 350 is a heavy duty voltage monitor. The product should be used when high
current relays, dual contacts or 480V controls are used. Since, the Model 350 uses heavy duty relays it comes in fixed voltage
range models rather than a dual auto-ranging version like the Model 250. SymCom MotorSaver Model 350-200 comes with a 15A
general purpose contact. The Model 350-400 provides a Form C (SPDT) relay rated to switch up to 600V, allowing the use of 480V
controls eliminating the need for a
Control Power Transformer to step the voltage down to
120-240V. Several two Form C (DPDT) models are also available.
|
 SymCom Voltage Monitor Model 355 |
SymCom Model 355 3-phase voltage monitor is perfect for heavy-duty applications that need
both protection and simple user-friendly diagnostics. Applications include pump panels, commercial HVAC, oil rigs and others.
The Model 355-200 is equipped with a heavy-duty 15A general purpose SPDT relay. The Model 355-400 and 355-600 are equipped with
a 470VA @ 600VAC pilot duty SPDT relay. A high voltage (600V) DPDT relay output option is available with the 400V and 600V
models.
|
 SymCom Voltage Monitor Model 455 |
SymCom Model 455 3-phase voltage monitor combines load and line side monitoring to alert
the user of Contactor failure or impending contactor failure. The line side
monitoring will protect the motor from damaging line side conditions prior to the motor starting. With other line-load side
voltage monitors, the motor must be started before a voltage problem is detected. With the Model 455, the motor is fully
protected at all times. The motor will not start when a power problem is present.
The Model 455 automatically senses whether it is connected to a 200V, 300V system or 400V system. An
adjustment is provided to set the nominal line voltage from 190-240 or 380-480VAC. Other adjustments include a 2-30 second trip
delay, a 2-300 second restart delay (and manual restart), and a voltage unbalance trip point adjustment from 2-8%. Four LEDs
indicate the status of the Model 455: run light, undervoltage, overvoltage, and phasing fault. The Model 455 is the only load
and line side monitor on the market that does not require a separate power source for its electronics, making it much easier to
install.
|
 SymCom Informer MS Voltage Monitors |
SymCom Informer MS is a handheld diagnostic tool designed for use with MotorSaver Model
455s equipped with infrared LED transmitters. The Informer MS receives and displays MotorSaver data to assist in monitoring and
troubleshooting the system. An auxiliary kit is available which allows the Informer MS to read data from a panelmounted Model
455 without opening the panel door.
|
 SymCom Model 460-15 Voltage Monitors |
SymCom Models 460-14 and 460-15 are designed to protect 3-phase loads from damaging power
conditions. Its wide operating range, combined with UL, cUL and CE compliance, enables quick access to domestic and global
markets. The Models 460-14 and 460-15 automatically sense whether they are connected to a 190-240V 60Hz system, a 440-480V 60Hz
system, or a 380-416V 50Hz system. An adjustment is provided to set the nominal line voltage from 190-240 or 380-480VAC. Motor
control is accomplished with one NO contact and one NC contact (Model 460-14) or two NO contacts (Model 460-15).
|
 SymCom Model 460 Voltage Monitors |
SymCom Model 460 is designed to protect 3-phase loads from damaging power conditions. The
460's wide operating range, combined with UL and CE compliance, enables quick access to domestic and global markets. The Model
460 automatically senses whether it is connected to a 190-240V 60Hz system, a 440-480V 60Hz system, or a 380-416V 50Hz system.
An adjustment is provided to set the nominal line voltage from 190-240 or 380-480VAC. Other adjustments include a 1-30 second
trip delay, a 1-500 second restart delay, and a 2-8% voltage unbalance trip point adjustment.
|
 SymCom Model 601 Voltage Monitors |
SymCom Model 601 3-phase voltage monitor is a fully-programmable electronic voltage monitor
designed to monitor 3-phase systems. It can be used as a stand-alone product or networked with a RM-1000, RM-2000,
PLC, computer or SCADA system. When a harmful condition is detected, the MotorSaver's
output relay is deactivated after the specified trip delay. The output relay reactivates after power line conditions return to
an acceptable level for the programmed restart delay (RD2).
The following 11 setpoints can be viewed from the 3-digit LED display or from a networked device: low
voltage, high voltage, voltage unbalance, low frequency, high frequency, trip delay for voltage/frequency faults, trip delay
for single-phase faults, rapid-cycle timer (RD1), restart delay after all faults (RD2), type of restart after all faults
(manual or automatic), and RS-485 address. Six parameters can be viewed as the motor is running: L1-L2 voltage, L2-L3 voltage,
L1-L3 voltage, average voltage, percent voltage unbalance, and frequency.
|
|
Our SymCom distributors warehouse in Boise, Idaho USA stocks some SymCom products (SymCom 3-Phase Voltage
Monitors MotorSaver Model 80 102 201 202 250 350 355 455 460 601 Three-Phase Voltage Monitor Distributors) enabling us to
further assist you in finding the correct SymCom MotorSaver Three-Phase Voltage Monitor in the USA (Alabama Alaska Arizona
Arkansas California Colorado Connecticut Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana
Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico
New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas
Utah Vermont Virginia Washington Washington D.C. West Virginia Wisconsin Wyoming), Canada and Mexico.
Whether we have SymCom MotorSaver 3-Phase Voltage Monitor in stock in Boise, Idaho USA or need to ship direct
from SymCom to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose
Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth
Portland Oklahoma City Tucson New Orleans Las Vegas Cleaveland Long Beach Alburquerque Kansas City Fresno Virginia Beach Atlanta
Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Whichita Santa Ana Pittsburgh Arlington
Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside
Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland
Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmand Yonkers
Spokane Augusta Rhichmand Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem);
www.clrwtr.com can get SymCom Voltage Monitors to you fast and save you some
money!
It will be very helpful if you have the SymCom MotorSaver Voltage Monitors part numbers ready, then our sales
representatives can provide you with a pricing and availability quote for SymCom 3-Phase Voltage Monitor that you are
looking for in seconds. If you do not have the part numbers for SymCom Three-Phase Voltage Monitors, our application engineers will be able
to help you figure out the part numbers and get the price quote to you as soon as possible.
|