 |
(800) 894-0412 (208) 368-0415 (Fax)
info@clrwtr.com |
KDR Series Optimized VFD Input Side |
KDR Optimized Reactor protects the drive on the Input:
- Universal mounting Footprint & Compact Design
- 3 Phase, 600V Class
- UL and CUL Recognized; UL or CUL Listing Available & CE Marked
- Available in Low Impedance (Low Z) and High Impedance (High Z)
- Available in 240, 480 and 575 VAC
- Patented High Quality Bobbin Construction (Units 85 amps and below)
- Distributed Gap Technology
- NEMA 1 enclosures available
- Input and Output Specified
- 40 Degrees C Ambient Temperature
- Minimum 95%L at 110% Load
- Minimum 80%L at 150% Load
- Tolerate 200% rated I for a minimum of 3 minutes
|
|
If you are looking for TCI Drive Reactors, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com we
will do our best to help you find the TRANS-COIL KLR Output Reactors that you are looking for at the lowest prices possible. If you
are searching for TCI KDR Input Reactor technical information (data-sheets) please use the
Trans-Coil Input/Output Reactor Datasheets OR
Product Selection Guide page links.
|
KLR Series Heavy-Duty VFD Input Side |
KLR Heavy Duty Three Phase Reactors
- Reduce Voltage Notching
- Prevent Drive Shutdown
- Reduce Harmonic Distortion
- Improve phase to phase voltage imbalance
- Improve True Power Factor
- Prevent Overcurrent Trips
- Protect Components from Damage
- Distributed Gap Technology for efficient operation
- RoHS Compliant!
|
KDR Series VFD Output Side |
KDR Optimized Drive Reactor extends the life of the motor on the Output:
- Dampen Overshoot Peak Voltage
- Reduce Motor Heating
- Reduce Audible Noise
- RoHS Compliant!
Trans-Coil (TCI) KDR Series Optimized Drive Reactors may be used at the output of AC-PWM VFD where the motor lead
lengths are less than 100 feet. The addition of a KDR unit to the output of a drive will dampen overshoot peak voltage, reduce motor
heating and audible noise, helping to extend the life of the motor.
|
KTR Series CAPGuard Tuning |
TCI CAPGuard KTR series tuning reactors are designed to be used in conjunction with power factor
correction capacitors whenever nonlinear loads are present. Tuning reactors can be installed with existing power factor
correction banks or as part of a new installation. Typical applications include any facility that applies power factor
correction capacitors to avoid penalty or to allow for more efficient energy consumption.
- 3 Phase, 600V Class
- Gapped Iron Core Inductor
- Copper Windings
- 40°C Ambient Temperature / 155°C Maximum Operating Temperature
- Available in NEMA 1 Enclosure
- Current Sense Windings for External Monitoring of Power Factor Bank.
|
DIN Rail Mounted Drive Reactor |
DIN Rail Mounted: KDR Optimized Drive Reactors & KLR Line Reactors
- For smaller applications incorporate DIN Rail Drive Reactors to the input and output of PWM drives.
- Reduce your installation time and cost using our DIN Rail Drive Reactor compatible with any 35mm DIN rail.
- Mounts to "Standard Steel High Profile" or "Heavy Duty Steel" DIN Rails.
- Reactor mounts horizontally on horizontal DIN Rail.
- Improve organization of reactors and their cabling.
|
|
Our TCI line reactor Distributor warehouse in Boise, Idaho stocks some TRANS-COIL Inc. products enabling us
to further assist you in finding the correct TCI Line Reactors in the USA, Canada and Mexico. Please follow the links for a
list of compatible AC drives from
ABB &
Yaskawa with TCI line reactors.
Whether we have TRANS-COIL Output Reactors in stock in Boise, Idaho USA or need to ship direct from TCI to any USA cities;
Clearwater Tech can get TCI KDR Input Reactors to you fast and save you some money! For a list of user manuals or operating
instructions available, please use Trans-Coil User Manuals page link. It will be
very helpful if you have the TCI drive reactors part numbers ready, then our sales representatives can provide you with a
pricing and availability quote for TRANS-COIL KLR Output Reactors that you are looking for in seconds. If you do not have the
part numbers for TCI Line Reactors, our application engineers will be able to help you figure out the part numbers and get the
price quote to you as soon as possible. For a list of FAQs or how to instructions, please use
TCI Frequently Asked Questions page link.
|
