Clearwater Tech Logo
Loading
Home | Contact Us
(800) 894-0412

TURCK

Home   >   Products   >   TURCK   >   Power Conditioners/Power Supplies   >   Fieldbus   >   FOUNDATION

TURCK

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

DPC-49-4RMB Backplane

The DPC system (Diagnostic Power Conditioner) is a power supply system for the installation of FOUNDATION fieldbus H1 segments. It provides extensive diagnostic options for monitoring FOUNDATION fieldbus segments and thus supports plantwide asset management.

  • Module rack for up to 8 power supply modules and 1 diagnostics module for the mounting of up to 4 H1 segments.
  • Redundant power supply
  • Removable terminal blocks with screw connections
  • RJ45 connector for HSE fieldbus diagnostics
TURCK DPC-49-4RMB FOUNDATION Fieldbus Backplane for the DPC System Distributors
DPC-49-4RMB Backplane

If you are looking for TURCK FOUNDATION Fieldbus Power Conditioners/Power Supplies, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the TURCK FOUNDATION Fieldbus Power Conditioner that you are looking for at competitive prices. If you are searching for TURCK FOUNDATION Fieldbus Power Supply technical information (data-sheets) please use the datasheets or product selection guide page links.

DPC-49-4RMB/SY Backplane

A DPC system consists of one or more module racks, each with up to eight DPC-49-IPS1 power supply modules and one DPC-49-ADU resp. DPC-49-DU diagnostics modules. Up to four H1 segments for each module rack can be operated and monitored redundantly in the FOUNDATION fieldbus network. The diagnostic data of the H1 segment can be transmitted via the HSE interface module DPC-49-HSEFD/24VDC to the higher level asset management system (only in conjunction with the diagnostics module DPC-49-ADU).

  • Module rack for up to 8 power supply modules and 1 diagnostics module for the mounting of up to 4 H1 segments.
  • Redundant power supply
  • Redundant HOST connection
  • Removable terminal blocks with screw connections
  • RJ45 connector for HSE fieldbus diagnostics
TURCK DPC-49-4RMB/SY FOUNDATION Fieldbus Backplane for the DPC System Distributor

DPC-49-4RMB/SY Backplane

DPC-49-1RMB Backplane

The module rack consist of a backplane and the actual rack system for the power supply modules. The single components of the system are electrically linked via the connection terminals of the backplane.

Redundant power supply via two 2-pole screw connectors. The connection to the host system is established via a removable 3-pole screw terminal. The H1 segment is connected separately on the fieldbus side via a removable 3-pole screw terminal. The shielding is achieved via insulated shield bus or via the 3-pole screw terminal, which is internally connected with the M5 threaded bolt for equipotential bonding.

  • Module rack for two power supply modules to built a H1 segment
  • Redundant power supply
  • Removable terminal blocks with screw connections
TURCK DPC-49-1RMB FOUNDATION Fieldbus Backplane for the DPC System Distributors
DPC-49-1RMB Backplane

DPC-49-IPS1 Module

The power supply module provides up to 30 VDC and 800 mA for the installation of a H1 segment. The network topology can be extended to 1900 m, due to the high output performance.

If two power supply modules are connected, the segment can be operated redundantly. Thereby the modules can be plugged and unplugged during operation (Hot swap-able in run).

  • Supply of one FOUNDATION fieldbus H1 segment
  • Output current: 800 mA
  • Output voltage: 28 to 30 VDC
  • Local diagnostics via LEDs
  • Complete galvanic isolation
TURCK DPC-49-IPS1 FOUNDATION Fieldbus Power Supply Module Distributor
DPC-49-IPS1 Module

DPC-49-DU Module

The DPC-49-DU monitors the external power supply at the module rack, the FOUNDATION fieldbus-H1 power modules and their redundant operation mode. The diagnostic function can be switched off separately for each segment.

The device features three LEDs indicating the operating status. Alarm messages are indicated by a red LED. Alarm signals are also output via a relay contact.

  • Redundancy monitoring of 4 H1 segments.
  • Local diagnostics via LEDs
  • Alarm signal via relay contact
  • Complete galvanic isolation
TURCK DPC-49-DU FOUNDATION Fieldbus Diagnostic Modules Distributors
DPC-49-DU Module

DPC-49-ADU Module

The diagnostic module DPC-49-ADU is used as a communication and diagnostic interface between the H1 segments and the power supply module. The diagnostics module monitors the electrical parameters and the communication parameters of the H1 segments. Operation without diagnostic module is possible.

The diagnostic information is collected in the device and transmitted via the HSE interface module to the higher fieldbus level (e.g. the host) as diagnostic and alarm data. Thereby the modules can be plugged and unplugged during operation (Hot swap-able in run).

  • Long-term diagnostics for 4 H1 segments
  • Local diagnostics via LEDs
  • Alarm signal via relay contact
  • complete galvanic isolation
TURCK DPC-49-ADU FOUNDATION Fieldbus Diagnostic Module Distributor
DPC-49-ADU Module

DPC-49-HSEFD/24VDC HSE Field Device

The diagnostic data of up to 16 H1 segments are transmitted by the HSE interface module DPC-49-HSEFD/24VDC via the FOUNDATION fieldbus-HSE to the higher level asset management system. Only diagnostics data of the DPC-49-ADU are transmitted via the HSE interface module but not the process data of the H1 segments. Each diagnostics module monitors up to four H1 segments.

  • HSE interface device for transmission of diagnostics data
  • FOUNDATION fieldbus function blocks for remote diagnostics
  • Local diagnostics via LEDs
  • Long-term diagnostics for 16 H1 segments
  • Complete galvanic isolation
TURCK DPC-49-HSEFD/24VDC FOUNDATION Fieldbus HSE Field Device Distributors

DPC-49-HSEFD/24VDC HSE Field Device

RPC49-205 Dual-Channel

The RPC49-205 provides two segments for the installation of a FOUNDATION fieldbus network. In combination with the PSU-3214, each segment provides up to 500 mA with an output voltage of at least 27.5 V. The output voltage depends on the output current.

  • Supply of 2 H1-segments, connection via removable screw terminals
  • Aluminium rail housing
  • Degree of protection IP20
  • Connection of the housing potential via an M5 x 1 bolt
  • Monitor function
  • LEDs for indication of the operating status
  • 2 x 500 mA output current
  • Redundant power supply
  • Short-circuit protected outputs
TURCK RPC49-205 FOUNDATION Fieldbus Dual Channel Power Conditioner Distributor

RPC49-205 Dual-Channel

PSU-3214 Single-Channel

The power supply unit PSU-3214 supplies a power conditioner. The device provides safety extra-low voltage (SELV) according to IEC/EN 60950. It features protection class II and corresponds to EMC class B.

The output volgate is 32 VDC with a maximum output current of 1.4 A. The overload protection is activated if the current exceeds 1.6 A. Depending on the output current, the fieldbus segment is supplied with an output voltage of approx. 29 V which is provided in combination with the TURCK power conditioner RPC49-205.

  • Output voltage 32 VDC
  • Output current 1.4 A
  • Safety extra low voltage SELV according to IEC/EN 60950
  • Universal operating voltage (94 to 264 VAC)
TURCK PSU-3214 Single-Channel Power Supplies Distributors
PSU-3214 Single-Channel

RPC49-10120EX FISCO

The intrinsically safe power supply RPC49-10120EX transmitts the fieldbus signal from a host to an intrinsically safe fieldbus device in the Ex area, zone 2.

The RPC49-10120EX enables integrated transmission between the host and fieldbus connections and thus allows parallel connection of several devices in the fieldbus and accordingly a higher number of field devices in the segment.

  • FISCO compliant according to IEC TS 60079-27
  • Protection type: [EEx ib] IIC
  • Mounting possible in zone 2
  • FISCO power supply for FOUNDATION fieldbus
  • Output current: 120 mA
  • Fieldbus - Repeater
  • Temperature range: -40 to +70°C
TURCK RPC49-10120EX FOUNDATION Fieldbus FISCO Power Supply Distributor

RPC49-10120EX FISCO

RPC49-10265EX FISCO

Designed to operate in harsh environments and suitable for installation in zone 2, the TURCK power supply RPC49-10265EX expands the boundaries for fieldbus topologies. The RPC49-10265EX provides up to 265 mA, powering field devices in the Ex area of the Gas Group IIB. The device is mounted on DIN rail. It is designed to exploit the very latest developments of the FISCO specification (Fieldbus Intrinsically Safe Concept) concerning the application in explosion hazardous areas.

  • FISCO compliant according to IEC TS 60079-27
  • Protection type: [EEx ib] IIB
  • Mounting possible in zone 2
  • FISCO power supply for FOUNDATION fieldbus
  • Output current: 265 mA
  • Fieldbus - Repeater
  • Temperature range: -40 to +70°C
TURCK RPC49-10265EX FOUNDATION Fieldbus FISCO Power Supplies Distributors

RPC49-10265EX FISCO

Our industrial automation supplies distributors warehouse in Boise, Idaho stocks some TURCK products enabling us to further assist you in finding the correct TURCK FOUNDATION Fieldbus Power Conditioners for your application in the USA, Canada and Mexico. Whether we have TURCK FOUNDATION Fieldbus Power Supplies in stock in Boise, Idaho or need to ship direct from TURCK to any USA cities; Clearwater Tech can get TURCK FOUNDATION Fieldbus Power Conditioner to you fast and save you money! It will be very helpful if you have the TURCK FOUNDATION Fieldbus Power Supply part numbers ready, then our sales representatives can provide you with a pricing and availability quote for TURCK FOUNDATION Fieldbus Components that you are looking for in seconds. If you do not have the part numbers for TURCK FOUNDATION Fieldbus Power Supplies/Power Conditioners, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us.

Weidmuller Converters

From an Unregulated or distorted input voltage, it can generate a stable, low-distortion output voltage. The compact converter (in protection class III) is specifically qualified for use in unearthed power systems, such as the battery backup systems in shipbuilding. The DC/DC converter is a versatile solution for all 24 VDC power supply applications. It features above-average power specifications, excellent resistance

SUNX Sensors

A Two Segment Receiving Element ensures accurate edge detection regardless of thickness or shape. Also, the wavelength band of the LED light source is wide enough to accurately detect a number of different wafer types such as glass or nitride coated wafers. Lastly, the M-DW1 has a 0.5ms response time allowing use in high-speed operations. The M-DW1 wafer-mapping sensor is a perfect alternative to laser wafer-mapping solutions.