(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

The TURCK inclinometer is a dual axis sensor for angular tilt detection. These sensors feature compact rectangular housings, and may be mounted up to a maximum of +/- 85 degree angles. Inclinometer sensors may be used in a wide variety of applications to solve unique feedback requirements where the customer needs to level platforms, control tilt angle or control a dancer.

If you are looking for TURCK Inclinometers, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Single-Axis Inclinometer that you are looking for at competitive prices. If you are searching for Dual-Axis Angular Position Sensor technical information (data-sheets) please use the datasheets or product selection guide page links.

The zero point, or level reference, of the inclinometer may be reset to the unique grade of your application. Depending on the model, it is adjustable up to +/- 15 degrees from the factory setting of absolute horizon level. This allows you to effectively shift the sensing window to accommodate slightly non-level rest positions of your equipment, such as the difference between an empty and a loaded dump truck. We offer a teaching pendant to make this a simple, single push-button task.

TURCK has expanded its broad offering of inclinometers with the addition of a new dual axis inclinometer sensor with a CANopen interface for angular tilt detection. These sensors have angle measurements of ±10, 45 and 60 degrees. The new TURCK Q42 inclinometer measures angular tilt in reference to gravity. At the heart of the TURCK Q42 inclinometer is a MEMS (micro-electro-mechanical system) device that incorporates a micro-electromechanical capacitive element into the sensor that utilizes two parallel plate electrodes, one stationary and one attached to a spring-mass system.

TURCK has enhanced its line of inclinometers with the introduction of a single axis device with dual programmable set points. Like all TURCK inclinometers, this device utilizes MEMS (micro-electro-mechanical system) technology to solve unique feedback requirements. This new offering replaces the traditional analog output with two discrete outputs and is programmable for settings such as on or off points, span and hysteresis. Users can simply program the inclinometer using a teach adapter. Single axis inclinometer sensors may be used in a wide variety of industries and incorporate an adjustable measuring range of 360 degrees.

TURCK inclinometers measures angular tilt in reference to gravity. At the heart of the TURCK inclinometer is a MEMS device that incorporates a micro-electromechanical capacitive element into the sensor that utilizes two parallel plate electrodes, one stationary and one attached to a spring-mass system. Movement causes acceleration that produces deflection in the non-stationary electrode. This results in a measurable change in the capacitance between the two plates that is proportional to the angle of deflection. These signals are conditioned to provide a single analog voltage output (0.1 to 4.9 VDC) or current output (4 to 20 mA). The micro board design in the MEMS technology allows for a compact, precise inclinometer in a very robust, industrialized package. The inclinometer is IP68 rated, with a temperature range of -30 to 70 °C.

TURCK introduces a new single axis inclinometer sensor for angular tilt detection with an adjustable measuring range of 360 degrees. Inclinometer sensors may be used in a wide variety of industries to solve unique feedback requirements where the customer needs to level platforms, control tilt angle or control a dancer. The new TURCK inclinometer measures angular tilt in reference to gravity.

At the heart of the TURCK inclinometer is a MEMS (micro-electro-mechanical system) device that incorporates a micro-electromechanical capacitive element into the sensor that utilizes two parallel plate electrodes, one stationary and one attached to a spring-mass system. Movement causes acceleration that produces defl ection in the non-stationary electrode. This results in a measurable change in the capacitance between the two plates that is proportional to the angle of defl ection. These signals are conditioned to provide a single analog voltage output (0.1 to 4.9 VDC) or current output (4 to 20 mA). The micro board design in the MEMS technology allows for a compact, precise inclinometer in a very robust, industrialized package. The inclinometer is IP68 rated, with a temperature range of -30 to 70 °C.

Our Industrial Products Distributors warehouse in Boise, Idaho stocks some TURCK products enabling us to further assist you in finding the correct TURCK Angular Position Switch for your application in the USA. Whether we have TURCK Angular Position Sensor in stock in Boise, Idaho or need to ship direct from TURCK to any USA cities; Clearwater Tech can get TURCK Inclinometer to you fast and save you money! It will be very helpful if you have the Angular Switch part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Single-Axis Inclinometer that you are looking for in seconds. If you do not have the part numbers for Dual-Axis Inclinometers, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.