Cordsets
Cables
Receptacles
Field Wireables
February 14, 2011

Weidmuller Connector

The High-Voltage HVE Series inserts from Weidmuller are equipped with lagging earth contacts. This means that plugging operations are never performed live, protecting the user and the circuit. The HSB series Weidmuller heavy-duty connector provides users with 35 A via each contact with screw connections for a safe and reliable connection. The HEE series Weidmueller heavy-duty connector has a high contact density and its design is based on the proven HE inserts.

SymCom Monitor

SymCom's model 202-200-SP is a voltage monitor designed to protect single-phase motors regardless of size. It is used on 190-240VAC, 50/60Hz motors to prevent damage caused by low voltage or high voltage. A unique microcontroller-based voltage sensing circuit constantly monitors the single-phase voltage to detect harmful power line conditions. When a harmful condition is detected, the 202-200-SP's output relay is deactivated after a fixed trip delay.

TURCK

Loading

Home   >   Products   >   TURCK USA   >   Minifast

TURCK

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

TURCK Minifast Cordsets Cables Distributor
Cordsets & Cables

TURCK 2 and 3-Wire minifast Cordsets, Standard & Heavy-Duty

  • Straight & Right Angle, Male & Female Connectors
  • NEMA 1, 3, 4, 6P and IEC IP 67 Protection
  • 300 V, 9 A

If you are looking for TURCK Minifast Cables, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the TURCK Minifast Cordsets & Cables that you are looking for at competitive prices. If you are searching for TURCK Minifast Receptacles technical information (data-sheets) please use the datasheets or product selection guide page links.

TURCK Minifast 19-Pin Connectors Cordsets Distributors
19-Pin Cordsets

TURCK has expanded its 1 1/8 inch minifast connector line to handle even more applications with the addition of the 19-pin connector. The 19-pin minifast connector is rated for up to 300 Volts, 4 Amps per pin, and is an excellent solution when requiring an even more robust, cost-effective solution than a traditional 19-pin M23 connector.

The 19-pin connector adds to the existing 9, 10 and 12-pin 1 1/8 inch minifast connector line. Additional minifast connector sizes and pin counts are also available, including a 7/8 inch connector with 2 through 6 pins, and a 1 inch connector with 6 through 8 pins. All connectors provide IEC IP 68 protection.

TURCK Minifast Receptacles Distributor
Receptacles

TURCK 5-Wire minifast Receptacles, Front Mount, 1/2-14 NPSM Threads

  • Male & Female Receptacles
  • NEMA 1, 3, 4, 6P and IEC IP 67 Protection
TURCK Minifast Field Wireable Connectors Distributors
Field Wireables

TURCK 3 and 4-Pin minifast Field Wireable Connectors

  • Straight & Right Angle, Male & Female Connectors
  • NEMA 1, 3, 4, 6P and IEC IP 67 Protection
TURCK Minifast Conduit Adapters Distributor
Conduit Adapters

TURCK minifast Conduit Adapters, 2 Port

  • Attaches to Standard Crouse-Hinds 3/4" Form 8, Mark 9 Conduit Bodies for Transition to 3-5 Wire minifast Connectors
  • Gasket and 8-32 x 1/2 Mounting Screws
  • IP 67 Protection (only when all receptacles are mated or covered with plugs)
  • Terminal strips Accept Up to 12 AWG Wires
TURCK Minifast Junction Tees Distributors
Junction Tees

TURCK minifast Tees

  • Available with Parallel or Junction-style Wiring
  • Simplifies Wiring Installations
  • Tough Molded Polyurethane Body
TURCK Minifast Quick Disconnect Adapters Distributor
Adapters

TURCK minifast Quick Disconnect Adapters

  • Convert minifast to eurofast or minifast to microfast
  • Rugged Metal Connector
TURCK Multibox Minifast Junction Boxes Distributors
Multibox Junction Boxes

TURCK multibox minifast Junction Boxes with LEDs, 3-pin

  • 4 and 8 Ports
  • Quick Disconnect minifast Connector
  • LEDs for Power and Signal
  • Simplifies Wiring Installations
TURCK Quick-Disconnect CSA Secondary Conduit Seal Distributor
Quick-Disconnect CSA Secondary Conduit Seal

TURCK announces the new 7/8-16UN Minifast Explosion-Proof Feed-Through Receptacle that is certified as a secondary conduit seal by CSA. This quick disconnect solution may be used as a secondary conduit seal to prevent gas migration or as a boundary seal when used with a TURCK CSA certified cordset. It may be used in Class I, Division 2 locations without intrinsically safe circuits and Class I, Division 1 locations with intrinsically safe circuits.

The explosion-proof feed-through receptacle is fully potted in a durable 316 stainless steel housing and can withstand 2,000 psi of pressure. The receptacles install directly into 1/2-14NPT threaded conduit entries, and are rated for 600 V and 9 A. When used as a secondary conduit seal, the receptacles are limited to 30 V and 600 mA. It also provides IEC IP67 protection against liquid ingress when a mating connector is attached.

Our industrial automation supplies distributors warehouse in Boise, Idaho stocks some TURCK products enabling us to further assist you in finding the correct TURCK minifast field wireable Connectors for your application in the USA, Canada and Mexico. Whether we have TURCK minifast cordsets in stock in Boise, Idaho or need to ship direct from TURCK to any USA cities; Clearwater Tech can get TURCK minifast receptacles to you fast and save you money! It will be very helpful if you have the TURCK minifast cordsets part numbers ready, then our sales representatives can provide you with a pricing and availability quote for TURCK minifast cables that you are looking for in seconds. If you do not have the part numbers for TURCK minifast Junction Boxes, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Tees
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

Connectors
Conduit Adapters
Junction Boxes
Clearwater Tech   © 2011 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY