ABB Low Voltage
Entrelec
Marathon Special Products
IDEC Corporation
June 15, 2010

Kubler Encoders

TURCK 3650 & 3670 encoder series function in many applications that had previously been off limits to absolute encoders. They provide a resolution of 9 bits with SSI, 4 to 20 mA, or 0 to 10 V output. The encoders feature an IP 69K protection rating and temperature range of -40 to 85°C, making the encoders ideal for outdoor use.
5850/5870 Analog Parallel

Yaskawa Drives

The G7 Series Yaskawa Inverter has the world's first 480V 3-level inverter architecture that eliminates or minimizes the installation problems associated with IGBT switching (very long cable lengths, bearing currents, and common mode currents) and protects the entire motor-drive system.
Variable Speed Drives

ABB / Weidmuller / Altech

Home   >   Products   >   Terminal Blocks

Weidmuller

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

Weidmuller Disconnect Terminal Blocks Distributor
Weidmuller

Weidmüller GmbH disconnect test terminals are specially designed for test and measurement tasks. Electrical circuits can be disconnected from the supply by means of their disconnect lever: an advantage for quick troubleshooting. The new WTR Weidmuller terminals are now equipped with even more functionalities. The disconnect lever area allows you to carry out the disconnection by means of either the lever or a pull pin (TNST). ZQV 2.5N pluggable cross-connections enable time and cost-saving feed-through of potentials to adjacent terminals.

If you are looking for Terminal Blocks, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find ABB Entrelec Terminals that you are looking for at the lowest prices possible. If you are searching for Weidmuller Terminal Blocks technical information (data-sheets) please use the Datasheets page link.

ABB Entrelec

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

Entrelec Screw Clamp Terminal Blocks Distributors
ABB/Entrelec

Choose the M 4/6, M 6/8, And M 10/10 Entrelec Terminal Blocks for:

  • Versatility : accommodate wire sizes from 22 to 6 AWG and multiple wire, wide current range.
  • Flexibility : snap onto Symmetrical And Asymmetrical DIN Rails.
  • Modularity : respond quickly to design changes.
  • UL, CSA, VDE, IEC and other worldwide approvals.
  • Color coded bodies for circuit identification.
Marathon Special Products

(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

Marathon MIK3 Series DIN-Rail Terminal Blocks Distributor
Marathon Special Products

Marathon Special Products Terminal Blocks - MIK3 5mm Center Lines 600 Volt, 20 Amp

  • Insulating Material, Polyamide 6.6, Gray
  • Wire Range #22-#12 AWG - 20 Amps
  • UL Recognized File No. XCFR2.E62806
  • CSA Certified File No. LR700930 - 25 Amps
  • VDE - 26 Amps
  • CE Mark
IDEC IZUMI

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

IDEC BN/BNH Series Terminal Blocks Distributors
IDEC IZUMI

IDEC BN series of terminal blocks are a traditional screw terminal block. With full size screws (nut and bolt termination on larger models) and current ratings up to 150A, there is a BN series terminal block for almost any application.

  • Modular construction
  • Optional dust covers and marking strips
  • UL94-V0 flammability rating
  • Mount on standard 35mm DIN rail
  • BN: Current capacities up to 150A
  • BNH: Current capacities up to 50A
  • BN: Fuse blocks for 1/4 x 1-1/4 fuses (optional blown fuse indication)
  • BNH: Unique Touch-Down terminals make wiring ring terminals especially convenient
Altech Corporation

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

Altech Corporation Screw Clamp Terminal Blocks Distributor
Altech Corporation

Altech terminal blocks feature screw clamps for maximum wiring efficiency and reliability. The blocks are supplied with open clamps, ready to accept wires. No special wire preparation or wire lugs are required. Simply strip the wire, insert and tighten the screw to the torque for gas-tight, vibration resistant, solid connections. The screw clamp design uses a tin-plated, solid copper or solid brass current bar with grooved serration, a steel cage clamp and screws. As the clamp is tightened, the wire is pressed firmly against the current bar, ensuring positive connections every time. The steel parts are zinc plated and passivated by a golden yellow chromate layer for maximum resistance against oxidation.

Our Terminal Blocks distributors warehouse in Boise, Idaho stocks some Terminal Block products enabling us to further assist you in finding the correct Terminal Blocks for your application in the USA, Canada and Mexico. Whether we have Terminals in stock in Boise, Idaho or need to ship direct from the factory to any USA cities; Clearwater Tech can get ABB Entrelec Terminal Blocks to you fast and save money! It will be very helpful if you have the Terminal Blocks part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Altech Terminals that you are looking for in seconds. If you do not have the part numbers for ABB Entrelec Terminal Blocks, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Weidmuller
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

MarathonSP
IDEC IZUMI
Altech Corporation
Clearwater Tech   © 2010 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY SITE INDEX