Toshiba Industrial Systems
The GCF612 is a multi function serial communications module for the V2000 Series S2T PLC. It communicates directly with the S2T CPU via the station bus. The GCF612 has three modes of operation: Computer Link Mode, Free ASCII Mode & Data Storage Mode. All three modes can be used simultaneously.
Computer Link Mode: This mode allows multiple V2000 S2T CPUs to be connected to higher level controller (master computer, MMI/OIS, or the T-PDS programming software. Up to 32 stations can be connected without a repeater.
Free ASCII Mode: This mode allows the GCF612 to act as a master device. In this mode the GCF612 can send Read & Write commands to connected devices that have a simple ASCII communications protocol. These devices include ASDs (adjustable speed drives), weigh scales, motor protection relays, etc.
If you are looking for Toshiba Communication Interface Modules, please call us at (800) 894-0412 or email us at firstname.lastname@example.org we will do our best to help you find the Toshiba GCF612 module that you are looking for at the most competitive prices possible. If you are searching for Toshiba interface module technical information (data-sheets) please use the datasheets or product selection guide page links.
Data Storage Mode: This mode allows the GCF612 to store large quantities of easily accessed data outside of the CPU and the GCF612. The GCF612 has a slot for a standard, off-the shelf, commercial compact flash card. Currently GCF612 can accept flash memory cards in the capacity of 32 Mb to 1 Gb. Approximately 5 million PLC registers can be saved to each 32 Mb on the compact flash card. Data, with a date and time stamp, can be saved to a CSV (comma separated value) in the compact flash card. Most spreadsheet and database programs can read CSV files. Once this data is imported in a program such as MS Excel all types of data manipulation, graphing, statistical analysis, etc. is possible. This data can be used for process improvement or proof of system status during litigation.
Whether we have communications interface modules in stock or need to ship direct from Toshiba Industrial Systems to any USA cities; Clearwater Tech can get GCF612 modules to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some communications module products enabling us to further assist you in finding the correct GCF612 module in the USA, Canada, or Mexico. It will be very helpful if you have the interface module part numbers ready, then our sales representatives can provide you with a pricing and availability quote for communications interface modules that you are looking for in seconds. If you do not have the part numbers for Toshiba GCF612 modules, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
The Accu-Coder DR21R is EPC's Direct Replacement Encoder for the Renco RCH20D with the "ABS" stepped-voltage output channel. Typically applied to series F, H, N and W motors, the RCH20D has been discontinued by the manufacturer and has become increasingly scarce and costly to replace. EPC's DR21R is an exact mechanical and electrical cross-reference for the RCH20D, including the correct 16-pin header connection. In addition to