Toshiba Industrial Systems
The 600 Amp, 208-1500 Volt / 720 Amp, 208-1500 Volt (Low Voltage) The HCV-1JBU is Toshiba's 3rd Generation of 600A, low voltage vacuum contactor. With the HCV-1KAU, Toshiba offers the first true 720A, low voltage vacuum contactor (it does not use parallel vacuum interrupters per phase).
HCV-1JBU & HCV-1KAU
The HCV-1KAU incorporates Toshiba's patented "Axial Magnetic Field Type Electrode" in the vacuum interrupters. This special design results in higher current interruption and smaller size than any other design of interrupters. The HCV-1JBU and HCV-1KAU contactors use a solid state, electronic control (drive unit), to operate the contactor. The drive unit uses an electronic circuit, and any control voltage between 100V and 240V either AC or DC can be used without changing the coil and/or other parts.
If you are looking for Toshiba Vacuum Contactors, please call us at (800) 894-0412 or email us at email@example.com we will do our best to help you find the Toshiba low voltage vacuum contactor that you are looking for at the most competitive prices possible. If you are searching for Toshiba medium voltage vacuum contactor technical information (data-sheets) please use the datasheets or product selection guide page links.
|Rated Insulation Voltage (kV)||1.5|
|Rated Operation Voltage (V)||208-1500|
|Rated Operational Current (A)||600||720|
|Rated Frequency (Hz)||50/60|
|Rated Making Current (kA)||6.0 (close 100 times)||7.2 (close 100 times)|
|Rated Breaking Current (kA)||4.8 (close-open 25 times)||5.76 (close-open 25 times)|
|Rated Insulation Level (kV)||AC 10 Impulse 45||AC 10 Impulse 30|
|Rated Short-Time Current (kA)||9.0 - 1 sec. 3.6 - 30 sec.||10.8 - 1 sec. 4.3 - 30 sec.|
|Method of Operation||Non-latch|
|Mechanical Operation (Million)||2.5|
|Electrical Operation (Million)||0.5|
|Operational Voltage (Standard)||100-240V AC/DC|
|Auxiliary Switch||3 N.O. - 3 N.C.|
|Switching Frequency (Times/h)||1200|
Whether we have HCV-1JBU contactor in stock or need to ship direct from Toshiba Industrial Systems to any USA cities; Clearwater Tech can get HCV-1KAU contactor to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some HCV-1JBU medium voltage contactor products enabling us to further assist you in finding the correct Toshiba contactor in the USA, Canada, or Mexico. It will be very helpful if you have the HCV-1KAU contactor part numbers ready, then our sales representatives can provide you with a pricing and availability quote for HCV-1JBU contactor that you are looking for in seconds. If you do not have the part numbers for HCV-1KAU contactor, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
Many Configurations of accessories are possible depending on whether these are front-mounted or side-mounted. AF16(Z) contactors are used for controlling power circuits up to 690 V AC and 440 V DC. They are mainly used for controlling non inductive or slightly inductive loads. These contactors are suitable for controlling 2 separate circuits or 1 circuit comprising 2 separate loads with a single supply. When the contactor
TCI Line Reactors
Trans-Coil CAPGuard KTR tuning reactors are designed to be used in conjunction with power factor correction capacitors whenever nonlinear loads are present. Tuning reactors can be installed with existing power factor correction banks or as part of a new installation. Typical applications include any facility that applies power factor correction capacitors to avoid penalty or to allow for more efficient energy consumption.