Clearwater Tech Logo
Home | Contact Us |
(800) 894-0412

Toshiba Industrial Systems

Home   >   Products   >   Toshiba   >   LF654   >   Flowmeters

Toshiba Magmeters

(800) 894-0412       (888) 723-4773 (Fax)

LF654/LF620/LF622 Series

The electromagnetic flowmeter uses Faraday's Law of electromagnetic induction to measure the process flow. The device consists of two units: a detector, through which the fluid to be measured flows and in which low-level signals proportional to flow rates are obtained; and a converter, which supplies excitation current to the detector, and amplifies the signals from the detector and then processes and converts the signals into the 4-20 mAdc current signal or communication signal. The meter features a Mount-Anywhere magnetic field distribution technology, the meter is highly immune to upstream flow disturbances. Combined with a multi-functional converter LF620 (combined type) or LF622 (separate type) equipped with its patented Noise-Sentry original noisesuppression circuit and advanced algorithms.

Toshiba LF654 Flanged Mount Anywhere Electromagnetic Flowmeters Distributors

LF654/LF620/LF622 Series

If you are looking for Toshiba Flowmeters, please call us at (800) 894-0412 or email us at we will do our best to help you find the Toshiba Mount-Anywhere Flanged LF654 Flowmeter that you are looking for at the most competitive prices possible. If you are searching for Toshiba Mount Anywhere LF654 Magmeters technical information (data-sheets) please use the datasheets or product selection guide page links.

The LF654 has a very high tolerance to noise, giving the unit a very stable output even for slurry fluid measurement. IR (Infrared) switches enable parameter setting of the converter without removing the cover. Flow direction can be set in either way, and its unique 128 x 128 dot matrix LCD display allows the LCD to be rotated electronically to 90, 180 and 270 degrees without opening the cover.

  • HART protocol (Highway Addressable Remote Transducer) is a communication protocol for industrial sensors recommended by the HCF (HART Communication Foundation).
  • DevComm2000 Smart Device Communicator available through TIC for performing HART device configurations on PC or laptop.
  • PROFIBUS is the communications protocol for factory and process automation that the PROFIBUS Organization recommends. Instead of analog control with a conventional analog signal (4-20 mA), it is fieldbus which digitizes all signals. Flowmeters support PROFIBUS-PA.
  • Modbus is the communication protocol that Modicon Inc. developed. Physical layer is RS485.

Do you have junctions, tees, valves, probes, flanges, elbows, lack of space for straight piping runs or vertical down flow piping? This is no problem for the Mount-Anywhere Magnetic Flowmeter! Toshiba's Mount-Anywhere Magmeter has saved thousands of customers thousands of dollars in installation cost by reducing or eliminating the cost of wiring, fence, labor, pipe, conduit and space. The Mount-Anywhere characterized coil technology allows flow measurement to better than 0.5% of rate accuracy only one diameter from the flange of an elbow, valve in line sizes up to 18".

The Mount-Anywhere Magmeter is the world's first and only true-flow, profile-immune magmeter. There is no need to re-pipe the process or to design long straight runs ahead of time to ensure the magmeter will meet its published accuracy specification. The Mount-Anywhere Magmeter is ideal for use as a universal magmeter with its ability to be installed virtually anywhere in the plant. This model is the successor of LF434/LF620, LF434/LF622.

Whether we have Toshiba Magmeters in stock or need to ship direct from Toshiba Industrial Systems to any USA cities Clearwater Tech can get multi-functional converter LF620 combined type to you fast and save you some money. Our Toshiba Industrial Systems distributors warehouse stocks some Toshiba LF622 separate type converter products enabling us to further assist you in finding the correct LF654 flow meter in the USA, Canada, or Mexico. It will be very helpful if you have the Toshiba LF620F Flow Meter part numbers ready, then our sales representatives can provide you with a pricing and availability quote for LF654 Flowmeters that you are looking for in seconds. If you do not have the part numbers for Toshiba LF622F Magmeters, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips

Can't find a part number?
E-mail Us.

Red Lion Meters

Red Lion PAXDP dual process input meter offers many features and performance capabilities to suit a wide range of industrial applications. Available in two models, AC or DC power, the meter has the capability to accept two, 4 to 20 mA or 0 to 10 VDC input signals. Each input signal can be independently scaled and displayed. In addition, a math function can be performed on the two signals, C + A + B, C - A - B, C + A - B, AB / C,

TURCK Sensors

Because of Possible Interference of the electromagnetic fields generated by the oscillators, minimum spacing is required between adjacent or opposing sensors. It is good engineering practice to mount sensors horizontally or with the sensing face looking down. Avoid sensors that look up wherever possible, especially if metal filings and chips are present. TURCK inductive proximity sensors are manufactured with a shielded coil,