Toshiba Industrial Systems
Toshiba offers a wide range of low and medium voltage vacuum contactors with advanced protection and control. Available in compact, electrically-maintained or latched-type designs, Toshiba's vacuum contactors are used to efficiently protect and control motors, transformers, and breakers for many different applications.
HCV-5HA & HCV-5HAL
The 400 Amp 2300-7200 Volts (Medium Voltage) HCV-5HA, the first vacuum contactor produced in Houston, Texas, was also the first Toshiba vacuum contactor to incorporate an electronic drive unit to power the operating coils. This solid state design eliminated the economizing resistors and improved the reliability of the coil circuit.
The contactor is available in either electrically maintained or latched type version. The compact size and high performance, as well as being available in a drawout design, has helped many OEMs and end-users replace old air-break contactors and breakers.
If you are looking for Toshiba Vacuum Contactors, please call us at (800) 894-0412 or email us at firstname.lastname@example.org we will do our best to help you find the Toshiba low voltage vacuum contactor that you are looking for at the most competitive prices possible. If you are searching for Toshiba medium voltage vacuum contactors technical information (data-sheets) please use the datasheets or product selection guide page links.
HCV-6KAU & HCV-6KALU
The 2300-7200 Volts (Medium Voltage) 720-ampere contactor replaces Toshiba's CV461M-KAT(L) and utilizes the latest vacuum and solid state technology developed by Toshiba. The HCV-6KA uses a solid state, electronic control (drive unit), to operate the contactor.
The drive unit uses an electronic circuit, and any control voltage between 100V and 240V either AC or DC can be used without changing the coil and/or other parts. The contactor is available in either electrically maintained or latched type version.
The HCV-6KA incorporates Toshiba's patented "Axial Magnetic Field Type Electrode" in the vacuum interrupters. This special design results in higher current interruption and smaller size than any other comparable design of interrupters.
HCV-1JBU & HCV-1KAU
The 600 Amp, 208-1500 Volt / 720 Amp, 208-1500 Volt (Low Voltage) The HCV-1JBU is Toshiba's 3rd Generation of 600A, low voltage vacuum contactor. With the HCV-1KAU, Toshiba offers the first true 720A, low voltage vacuum contactor (it does not use parallel vacuum interrupters per phase).
The HCV-1KAU incorporates Toshiba's patented "Axial Magnetic Field Type Electrode" in the vacuum interrupters. This special design results in higher current interruption and smaller size than any other design of interrupters. The HCV-1JBU and HCV-1KAU contactors use a solid state, electronic control (drive unit), to operate the contactor. The drive unit uses an electronic circuit, and any control voltage between 100V and 240V either AC or DC can be used without changing the coil and/or other parts.
CV-10HA, CV-10HAL, CV-10HB & CV-10HBL
HA(L)/HB(L) 320 Amp, 12/15KV contactor is unique in the market and is going into many applications where only vacuum circuit breakers were used in the past.
The CV-10H offers a product of lower cost, smaller size, and over 10 times the life over medium voltage breakers.
The HB model has been specially designed for capacitor switching, while the HA is for motor and transformer switching.
The CV-10 is available in non-latched or latched type version.
Whether we have HCV-5HA(L) Contactors in stock or need to ship direct from Toshiba Industrial Systems to any USA cities; can get HCV-1JBU/1KAU low voltage contactors to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some HCV-6KA(L)U medium voltage contactor products enabling us to further assist you in finding the correct CV-10H contactors in the USA, Canada, or Mexico. It will be very helpful if you have the JK series OEM power cells part numbers ready, then our sales representatives can provide you with a pricing and availability quote for low voltage contactor that you are looking for in seconds. If you do not have the part numbers for Toshiba medium voltage contactors, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
The Auxiliary Contact Blocks are used for the operation of auxiliary circuits and control circuits. CA3 1-pole auxiliary contact blocks, designed for standard industrial environments, are equipped with N.O. or N.C. contacts & spring-type connecting terminals. All 1-pole auxiliary contact blocks are protected against accidental direct contact and bear the corresponding function marking. A maximum of two 1-pole auxiliary
Trans-Coil high endurance capacitors are intended for use in electrical environments that are rich in harmonic content due to non-linear loads. Some applications include factories and plants with a large numbers of variable frequency drives and/or DC drives, waste water treatment plants, pumping stations, facilities that co-generate power, and power consumers that are incurring penalties for poor power factor.