Vynckier Enclosure Systems Inc.
APO sizes range consists of nine sizes from 7" x 6" to 24" x 24" with varying depths. All APO enclosures have the capability to be horizontally or vertically coupled by means of gasketed coupling collars. All bases are gray (RAL 7035) and are hot compression molded with fiberglass reinforced polyester.
Brass M4 threaded inserts are factory installed for attachment of mounting plates. Covers are made of either clear polycarbonate or opaque gray (RAL7035) hot compression molded fiberglass reinforced polyester. DT covers are UL recognized. APO enclosures meet Ingress Protection standard IP67-11 and IP67-9, respectively (NBN C20-001 annex A).
If you are looking for Vynckier APO Series Modular Enclosures, please call us on (800) 894 - 0412 or email us at email@example.com we will do our best to help you find the Vynckier Opaque Cover Enclosure (APO) that you are looking for at competitive prices. If you are searching for Vynckier Transparent Cover Enclosure (APO CT) technical information (data-sheets) please use the datasheets or product selection guide page links.
Large APO enclosures are maintenance free and corrosion resistant. Four to six bosses suitable for M6 threaded inserts are provided in each base. APO enclosures are suitable for wall or pole mounting. These enclosures may easily be modified with conventional tools such as a drill, milling equipment, saw or a punch. Vynckier's APO enclosures are capable of withstanding continuous temperatures up to 302° F (150° C).
Clear polycarbonate covers are able to resist temperatures of up to 248°F (120°C). APO enclosures provide protection for equipment and operators from indirect electrical contact. PO enclosures are UL listed per UL Standard 508 and CSA Certified per Standard C22.2-0, 0.4, 0.7, 0.6, 94 Type 3,3R, 4, 4X, 12 and 13.
Designed for use as insulated electrical junction boxes, terminal wiring boxes, instrument housings, and electrical control enclosures in highly corrosive environments. Ideal for use in most petro-chemical plants, sewage plants, electroplating plants, etc. that may be subject to occasional submersion. Clear polycarbonate cover provides easy visual inspection of interior components.
- IEC 439-1
- IEC 529 - Rated IP67-11
- EN 60439-1
- EN 60529
- CSA Certified per C22.2 No. 94
- UL 508 NEMA 3, 3R, 4, 4X,12 & 13
- AS Australian Standards 3131-1991
- EExeII, NIEB 88B.102.698 U
- LLOYD'S Register of Shipping
- Nonmetallic feet: These mounting feet have been successfully tested with loads up to 330 lbs.
- Stainless steel feet: These mounting feet have been successfully tested with loads up to 330 lbs.
- Direct corner mounting: Loads up to 660 lbs. have been successfully tested.
These are tested loads and are below the product limitations. However, for high load applications, direct corner mounting is recommended.
Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some Vynckier products enabling us to further assist you in finding the correct Vynckier Transparent Hinged Inspection Window Enclosures (APO DT) in the USA, Mexico and Canada. Whether we have Vynckier Inspection Windows (DT Cover) in stock in Boise, Idaho USA or need to ship direct from Vynckier Enclosure Systems Inc. to any USA cities; Clearwater Tech can get Vynckier APO Components to you fast and save you some money! It will be very helpful if you have the Vynckier APO Series enclosure part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Vynckier APO Accessories that you are looking for in seconds. If you do not have the part numbers for Vynckier Modular Enclosures, our application engineers will be able to help you figure out the part numbers and get the quote to you as soon as possible.
4-Way Standard Holes accept all brands of oil-tight pushbuttons, switches, and pilot lights. Hole diameter is 1.20 In. (30.5 mm). Saginaw type 12 pushbutton enclosures are designed to house oil-tight push buttons, switches, and pilot lights. Saginaw boxes are primarily used in an indoor environment to protect against dust, falling dirt, dropping of non-corrosive liquid, and light splashing of water.
Allied Moulded Box
Also Featuring a Formed-In-Place (FIP) polyurethane gasket system, the mounted window protects from outside elements such as ultraviolet UV rays, dirt, dust, and water. The window kit features an aesthetically pleasing design made from clear polycarbonate thermoplastic, and includes all mounting hardware to securely fasten to an enclosure on a flat surface. Allied Moulded's new inspection window kits are designed to provide visibility