APO
Vynckier Enclosure Systems Inc.
VJ Clear Cover
VMS Polycarbonate
May 24, 2010

Weidmuller Enclosures

Certified in Accordance with international standards, they also meet the new ATEX and IECEx regulations for potentially explosive atmospheres and have further certifications for use in standard industrial applications. You can find innovative solutions from Weidmller everywhere; from power distribution or control and monitoring systems in boiler and turbine control systems, in fuel management and combustion control systems, or in transmission and distribution applications.

Hammond Enclosure

The New Hammond Wall Mount (HWM) Cabinet was designed with the technical professional in mind. The new design enables the cabinet to be installed in less time using fewer installers than similar cabinets of its size. The strength of our new cabinet comes from the heavy duty spring hinge pin. The HWM includes a vented front door and side panels that were specifically designed for high capacity servers, switches and power management devices.

Vynckier Enclosure Systems

Loading

Home   >   Products   >   Vynckier Enclosures

Vynckier Enclosures

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

Vynckier APO Series Modular Enclosures Distributor
APO Series

Modular Enclosures

Vynckier APO sizes range consists of nine sizes from 7" x 6" to 24" x 24" with varying depths. All Vynckier APO enclosures have the capability to be horizontally or vertically coupled by means of gasketed coupling collars. APO enclosures meet Ingress Protection standard IP67-11 and IP67-9, respectively (NBN C20-001 annex A).

APO enclosures are suitable for wall or pole mounting. These enclosures may easily be modified with conventional tools such as a drill, milling equipment, saw or a punch. Vynckier's APO enclosures are capable of withstanding continuous temperatures up to 302 F (150 C). APO enclosures provide protection for equipment and operators from indirect electrical contact.

If you are looking for Vynckier Enclosures, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Vynckier Polyester Enclosure that you are looking for at the most competitive prices possible. If you are searching for Vynckier Polycarbonate Enclosures technical information (data-sheets) please use the datasheets or product selection guide page links.

Vynckier VJ Series JIC Instrument Enclosure Distributor
VJ Series

JIC Instrument Enclosures

Features:

  • The VJ series is designed in accordance with the Joint Industrial Council (JIC) - USA.
  • The VJ range consists of seven box sizes in several versions:
    • with screw cover
    • with stainless steel piano hinge
    • with non-metallic hinges
    • with standard or padlockable latch
  • The bases and covers are made of gray (RAL 7035), hot molded, fiberglass reinforced polyester, dyed in mass. They come complete with UL/CSA-label and 4 threaded inserts for a mounting plate.
  • Cover screw holes in corners are outside of gasketed area.
Vynckier VMS Series Polycarbonate Modular Enclosures Distributors
VMS Series

VMS Series Polycarbonate Modular Enclosures

Features:

  • Modular dimensions in increments of 4", from 12" x 8" to 24" x 16".
  • Bases and end plates in fiberglass reinforced polycarbonate, with covers in polycarbonate.
  • Covers transparent, opaque or DT cover, common design and depth.
  • DT cover with double closure system: snap lock and additional fastening with thumb screws.
  • Basic design incorporates removable side walls for easy access and wiring.
  • Time saving coupling by means of vertical keys, sunk into the corner shafts, eliminating nuts, bolts and coupling frames.
Vynckier ARIA Series Industrial Wall Mount Enclosures Distributors

ARIA Series

ARIA Series Industrial Wall Mount Enclosures

Heavy industrial applications call for heavy-duty enclosures, and we offer ARIA enclosures for protecting electrical panels and wiring in industrial settings. Whatever the industrial application may be, ARIA enclosures from Vynckier Enclosure Systems are perfect for the job! ARIA electrical enclosures are ideal for all industrial settings, including:

  • Waste water treatment plants
  • Saw mills
  • Mining sites
  • Steel mills
  • Offshore oil platforms, and more.

A variety of industrial sites can rely on these highly protective non-metallic electrical enclosures, whatever's happening at the site, and whether the ARIA enclosures are outdoors or indoors. ARIA enclosures are known for their durability and performance in even the most aggressive outdoor environments.

Vynckier Superpolyrel Series Enclosures with Polyester Covers Distributor
SUPERPOLYREL Series
  • The range consists of nine cabinets, ranging from 20 x 30 inch to 50 x 40 inch.
  • Cabinet is self-extinguishing, hot molded halogen-free fiberglass reinforced polyester.
  • Gray dyed in mass (RAL 7036)
  • Designed for wall mounting and free standing units.
  • Can be coupled in height, width and depth and still retain UL listing.
  • Resists wide temperature range: -58F to +302F (-50C to +150C), momentary +392F (200C)
  • Door with 5-point latching mechanism.
  • Feature total insulation and a high degree of protection IP65-11 (IEC 529) and CENELEC EN60529.
  • For indoor and outdoor applications.
  • Available with floor mounting pads.
Vynckier FRP Polysafe Series Enclosures with Gasketed Window Distributors
POLYSAFE Series
  • 14 standard sizes range from 20 inch x 20 inch to 50 inch x 40 inch with a single depth of 12-1/2 inch.
  • The entire Polysafe enclosure series are 4mm thick, Halogen-free, hot compression molded fiberglass reinforced polyester and are self-extinguishing.
  • Doors and panels are made of Beige (RAL 7035)
  • Doors are mounted on internal hinges and the latches have a 5-point internal latching mechanism.
  • Designed to be wall mounted or free-standing.
  • Contains a (PUR) continuously poured polyurethane gasket.
  • May be horizontally or vertically coupled.
  • Two depth extensions may be added while retaining UL rating.
  • All factory assembled units maintain total insulation and have been tested to IP65-1K10 (20J) acc. To IEC 60529 and CENELEC EN50102.
Vynckier SERIES 55 Enclosures Distributor
SERIES 55
  • Available in three sizes, ranging from 4 11/32 x4 21/43 x 2 31/44 to 8 11/42 x 6 21/43 x 3 11/42
  • Designed to accommodate Series 55 terminal strips and lugs
  • Made of injection-molded, impactresistant polystyrene
  • Clear covers made of injection-molded polycarbonate available on the two larger boxes
  • Accessories include back panels, front panels, DIN rails, terminal strips, terminal lugs and egress glands
  • Temperature resistance: -58F to +302F (-50C to +150C) Momentary +392F (200C)
Vynckier VM Series Miniature Pushbutton Enclosures Distributors
VM Series
  • The Vynckier Miniature or VM Series available in ten sizes ranging from 5"X 3"X 3" to 7"X 7" X 6".
  • Opaque covers and all bases are made of impact and corrosive resistant VALOX, RAL 7035 color.
  • Transparent cover is made from polycarbonate.
  • Molded internal bosses for back panel, mounting of components or DIN rail.
  • IP66 rating.
  • UL NEMA Type 3, 3R, 4, 4X, 12 & 13
  • CSA Type 2, 3, 4 & 5
  • ASTM D 648 up to 280F heat deflection temperature.
  • Non-metallic cover screws.
  • Tongue & groove gasket fitting to ensure tight seal.
Vynckier Flex O Box Junction Boxes Distributor
FlexOBox
  • Flexible entries make cutting and breaking unnecessary. Cables or tubes can be inserted into them directly.
  • Cables glands can be screwed directly into the entries without any joints or lockout being necessary.
  • Nine entries: 7xPG16 in the side walls and two 20-cm holes in the backwall.
  • Substantial space for wiring
  • The double-wall base makes the box extremely rigid. Oval fastening points facilitate levelling.
  • Terminal blocks are available for making rapid, safe connections.
  • CEBEC, KEMA and VDE approved
  • Safe and reliable entries,even years later
  • IP65 protection degree
  • Total insulation
  • Manufactured in high quality thermoplastic material
  • Resistant in tests to heat from a 750C incandescent wire
  • Halogen-free

Vynckier Enclosure Systems, Inc. ("VES") is based in Houston and provides exclusive sales and application services in the United States. The Vynckier enclosures manufactured in Belgium and those manufactured in the United States are available through a customer-focused factory staff and a nationwide network of highly trained manufacturers representatives and distributors. Vynckier enclosures are versatile. From small, hand held pushbutton boxes to large freestanding cabinets, VES offers a large variety and inventory of non-metallic products. Vynckier, headquartered in Ghent, Belgium, has one of the largest and most advanced plastic molding operations in Europe. Vynckier Enclosure Systems produces many of its own raw materials, such as molding compounds, Bakelite and Fiberglass Reinforced Polyester (FRP).

Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some Vynckier products enabling us to further assist you in finding the correct VJ series enclosure in the USA, Canada and Mexico. Whether we have APO series enclosure in stock in Boise, Idaho USA or need to ship direct from GE Vynckier to any USA cities; Clearwater Tech can get DT series covers to you fast and save you some money! It will be very helpful if you have the ARIA series enclosure part numbers ready, then our sales representatives can provide you with a pricing and availability quote for POLYSAFE series enclosure that you are looking for in seconds. If you do not have the part numbers for MULTIBOX series enclosure, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

ARIA Series
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

SUPERPOLYREL
FLEXOBOX
POLYSAFE
Clearwater Tech   © 2010 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY SITE INDEX