Clearwater Tech Logo
Home | Contact Us |
(800) 894-0412


Home   >   Products   >   WEG   >   3-Phase   >   General-Purpose   >   Motors

WEG Motors

(800) 894-0412       (888) 723-4773 (Fax)


Presenting a whole new electrical and mechanical design, the new platform of Rolled Steel motors are made to run cooler, last longer and to be easier to install and maintain. The High Efficiency motors are specifically designed to meet or exceed all EPAct requirements for energy efficiency. They are certified by the Department of Energy with our Certificate of Compliance number CC029A.

These ODP motors are designed for environments where dirt and moisture are minimal and provide maximum ventilation and heat dissipation, also they are supplied with drip cover as standard making them suitable for vertical mounting. Design B torques and energy efficient designs from 143/5T through 254/6T frames.

WEG Three Phase General Purpose Motors Distributors


If you are looking for WEG Three-Phase General Purpose Motors, please call us at (800) 894-0412 or email us at we will do our best to help you find W01 ODP high efficiency motor that you are looking for at the most competitive prices possible. If you are searching for W01 ODP NEMA premium efficiency motors technical information (data-sheets) please use the datasheets or product selection guide page links.


  • Pumps
  • Compressors
  • Fans
  • Machine Tools
  • Other general purpose

Features That Make a Difference

  • New ventilation system for improved thermal performance
  • Robust feet design suitable for tougher applications (frames 182/4T and up)
  • New and more robust eyebolts design (frames 182/4T and up) plus an additional eyebolt on non-drive end allowing vertical shaft down lifting for frames 213/5T and 254/6T
  • Oversized diagonally split aluminum terminal box that exceeds IP55 requirements and is rotatable in 90 degrees increments for flexibility during installation
  • Option for internal AEGIS SGR
  • Color coded/numbered leads as standard for easy wiring
  • Regreasable ball bearings on 254/6T frame as standard (optional for 182/4T and 213/5T)
  • Bearing cap as standard on flanged motors, optional on non-flanged
  • Motor frame painting system 500 hours minimum ASTM B117 salt spray
  • Suitable for VFD operation as per NEMA MG1 part

Standard Features

  • Rated Output: 1 to 25 HP
  • Number of Poles: 2 to 6
  • Class F insulation (B temperature rise)
  • Frame Sizes: NEMA 143/5T to 254/6T
  • Double punched base
  • Rated voltage: 208-230/460 V
  • Frequency: 60 Hz (dual rated 50 Hz 190-220/380-415V)
  • IP21 enclosure
  • F1 Foot mount as standard
  • Aluminum endshields
  • Cast Iron flanges for improved strength (182/4TC and above), Aluminum on 143/5TC frame
  • Internal bolts, giving a clean surface to the motor, avoiding trapping materials and allowing easy paint job after assembly to the load, if required
  • Double shielded ball bearings on frames up to 213/5T. Regreasable ball bearings on 254/6T frame
  • Bearing cap as standard on flanged motors, optional on non-flanged
  • Ambient temperature: -20 °C to +40 °C
  • 1040/45 carbon steel shaft

Optional Features

  • F2 and F3 mount, C-face, Footless
  • Enclosure: ODPAO
  • Voltage: 575V, 200/400V and others (no 50Hz rating)
  • Regreasable bearings on 182/4T and 213/5T
  • Double sealed ball bearings and/or bearing cap
  • Drip cover
  • Internal Aegis SGR
  • Space heater and thermal protection (thermostats and thermistors)

Whether we have general purpose 3-phase motor in stock in Boise Idaho or need to ship direct from WEG to any USA cities; Clearwater Tech can get three-phase general purpose motors to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some general purpose 3-phase motors enabling us to further assist you in finding the correct three-phase general purpose motor in the USA, Canada, or Mexico. It will be very helpful if you have the W01 TEFC high efficiency motors part numbers ready, then our sales representatives can provide you with a pricing and availability quote for W01 TEFC NEMA premium efficiency motor that you are looking for in seconds. If you do not have the part numbers for WEG three-phase general purpose motors, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips

Can't find a part number?
E-mail Us.

LEESON Accessories

Cable & Keypad are purchased separately. Installing the Remote keypad and Cable involves partially dis-assembling the drive. Instructions are included with the keypad. Also available as a Modification, see Mod Squad section. The Remote Keypad option cannot be used on NEMA 4, 4X, or 12 Rated Micro Series Drives, as installing this option will violate the integrity of the enclosure. It is only meant for NEMA 1 or chassis models

IDEC Relays

The Adaptable RU Series are available in either 2 pole (DPDT) or 4 pole (4DPDT) models. Both RU2 and RU4 models have multiple standard features, including a non-polarized green indicator LED, a mechanical indicator flag, an easily accessible and replaceable marking plate, and a manual latching lever, coded orange/red for AC coil and green/blue for DC coil. What sets the RU relays apart from other relays is the unique internal construction.