Clearwater Tech Logo
Loading
Home | Contact Us |
(800) 894-0412

WEG

Home   >   Products   >   WEG   >   6hp to 400hp   >   SSW-07   >   Soft Starters

WEG Soft Starters

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

SSW-07: 6hp to 400hp

Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors in power ratings from 6 Hp to 400 Hp.

Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors.The control of the voltage applied to the motor by means of adjustments to the firing angle of thyristors allows the soft-starter to start and stop an electric motor smoothly.

The SSW07, with DSP (Digital Signal Processor) control was designed for high performance on motor starts and stops with an excellent cost-benefit ratio. Easy to set up, it simplifies start-up activities and daily operation.

The SSW07 is compact optimizing space in electric panels. It already incorporates electric motor protection. It adapts to customer needs through its easy-to-install optional accessories.

WEG SSW-07 Soft-Starters 6hp to 400hp Distributors
SSW-07 Series

If you are looking for WEG SSW-07 Soft Starters, please call us at (800) 894-0412 or email us at info@clrwtr.com we will do our best to help you find SSW-07 soft start that you are looking for at the most competitive prices possible. If you are searching for SSW-07 soft starter technical information (data-sheets) please use the datasheets or product selection guide page links.

Manuals

The SSW07 adapts to customer needs through its easy-to-install optional accessories. Thus, a keypad, a communication interface or a motor PTC input can be added to the product.

Note: SSW07 Soft-Starter Series were designed for exclusively industrial or professional use.

Applications:

Fans / Exhaust fans, Centrifugal Pumps, Dosing / Process Pumps, Stirrers / Mixers, Compressors, Soap Extruders, Driers / Continuous Ovens, Pelletizers, Conveyors / Monorails, Balls / Hammer Mills, Roller Tables, Polishing Machines, Cutters, Wood Chippers, Saws and Plains, Injectors / Blowers, Granulators, Bottling Lines, Driers / Washing Machines, Bottle Manufacturing Machine, Suppression Systems, Drills / Grinders, Wire Drawing, Dosing Pumps, Process Pumps, Rotating Filters, Rotating Ovens, Wood Chip, Coaters, Paper Refineries, Sifters (Sievers) / Vibrating Tables, Dynamic Separators, Dosers, Air Conditioning Systems, Screw / Piston Compressors, Monorails, Escalators, Laggage Conveyors (Airports).

Features

  • Reduction of mechanical stresses over the coupling and transmission devices (gearboxes, pulleys, gears, conveyors) during the start
  • Increases motor and machine mechanical equipment lifetime due to the reduction of mechanical stress
  • Easy operation, setup and maintenance
  • Simple electrical installation
  • Operates in environments up to 55 °C (without current reduction for all models)
  • Integral, electronic motor protection
  • Kick-Start function for starting high breakaway torque loads
  • Reduces Water Hammer in pump applications
  • Limitation of voltage drop during start
  • Universal voltage (220 to 575 Vac)
  • Switched mode power supply with EMC filter for the control electronics (110 to 240 Vac)
  • Built-in by-pass providing size reduction and energy saving
  • Voltage monitoring of the electronics allows to back-up I x t values (thermal image).

IP20 Frame Size 1 and 2, IP00 Frame Size 3

Motor HP Soft Starter AMPS Catalog Number Frame Size Dimensions (in.) H x W x D
INPUT POWER SUPPLY: THREE-PHASE - 220V / 230V
6 17 SSW070017T5SZ 1 6.38 x 3.74 x 6.18
7.5 24 SSW070024T5SZ 1 6.38 x 3.74 x 6.18
10 30 SSW070030T5SZ 1 6.38 x 3.74 x 6.18
15 45 SSW070045T5SZ 2 8.2 x 5.57 x 7.94
20 61 SSW070061T5SZ 2 8.2 x 5.57 x 7.94
30 85 SSW070085T5SZ 2 8.2 x 5.57 x 7.94
50 130 SSW070130T5SZ 3 10.9 x 8.6 x 8.66
60 171 SSW070171T5SZ 3 10.9 x 8.6 x 8.66
75 200 SSW070200T5SZ 3 10.9 x 8.6 x 8.66
INPUT POWER SUPPLY: THREE-PHASE - 440V / 460V
12.5 17 SSW070017T5SZ 1 6.38 x 3.74 x 6.18
15 24 SSW070024T5SZ 1 6.38 x 3.74 x 6.18
20 30 SSW070030T5SZ 1 6.38 x 3.74 x 6.18
30 45 SSW070045T5SZ 2 8.2 x 5.57 x 7.94
50 61 SSW070061T5SZ 2 8.2 x 5.57 x 7.94
60 85 SSW070085T5SZ 2 8.2 x 5.57 x 7.94
100 130 SSW070130T5SZ 3 10.9 x 8.6 x 8.66
125 171 SSW070171T5SZ 3 10.9 x 8.6 x 8.66
150 200 SSW070200T5SZ 3 10.9 x 8.6 x 8.66
INPUT POWER SUPPLY: THREE-PHASE - 575V
15 17 SSW070017T5SZ 1 6.38 x 3.74 x 6.18
20 24 SSW070024T5SZ 1 6.38 x 3.74 x 6.18
30 30 SSW070030T5SZ 1 6.38 x 3.74 x 6.18
40 45 SSW070045T5SZ 2 8.2 x 5.57 x 7.94
60 61 SSW070061T5SZ 2 8.2 x 5.57 x 7.94
75 85 SSW070085T5SZ 2 8.2 x 5.57 x 7.94
125 130 SSW070130T5SZ 3 10.9 x 8.6 x 8.66
175 171 SSW070171T5SZ 3 10.9 x 8.6 x 8.66
200 200 SSW070200T5SZ 3 10.9 x 8.6 x 8.66

Whether we have SSW07 soft starter in stock in Boise Idaho or need to ship direct from WEG to any USA cities; Clearwater Tech can get SSW-07 soft starter to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some SSW07 soft start enabling us to further assist you in finding the correct SSW07 soft starters in the USA, Canada, or Mexico. It will be very helpful if you have the SSW-07 soft starters part numbers ready, then our sales representatives can provide you with a pricing and availability quote for SSW07 soft start that you are looking for in seconds. If you do not have the part numbers for SSW-07 soft start, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us.

ABB Starters

The MS132-16 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 16.0 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 100 kA at 400 VAC and the trip class 10. Further features

Baldor Motors

In Applications where only single phase power is utilized, these motors are available from 1/12 Hp through 15 Hp in TEFC and ODP designs. Standard foot mounted configurations are available, as well as C-Face foot mounted and C-Face footless. These are also offered in 1/4 Hp through 5 Hp as Super-E Premium Efficient motors where energy savings is desired. Single phase TEFC C-face no drip cover motor applications.