Micro Interface Digital
PAC #96 Pre-Assembled Cables
PLC Input/Output Modules
Pre-Assembled Control Cable
May 16, 2011

TURCK Cables

The New Cat 5e Ethernet Cables are Gigabit capable and incorporate flexlife cable jackets. This jacket material is resistant to abrasion, crush and chemical influences, making it particularly suitable for harsh duty environments. The Ethernet cable is available with 4 or 8 conductors (2 and 4 pair counts). The cable may be specified with straight or right-angle RJ45 or M12 connectors.

IDEC Relays

The RJ22 Model has a maximum contact rating of 1amp at 250V AC, while maintaining a minimum switching load of 100uA 1V DC, allowing customers to use this relay for their dry circuit switching needs. With the shortest width on the market RJ bifurcated relays are durable, compact and available with plug-in or PCB terminals. Like the rest of the RJ family, RJ22 PCB bifurcated relays have been manufactured with attention to even the smallest details.

Weidmuller

Loading

Home   >   Products   >   Weidmuller   >   Pre-Cabling System   >   for Byte

Weidmuller

(844) 331-9375       (888) 723-4773 (Fax)
info@clrwtr.com

Weidmuller PLC Front Adapter for SIEMENS S7 Distributors
Front Adapter for PLC S7

Front Adapter for PLC S7

The front-panel adapter can be quickly and securely connected to SIEMENS S7 300/400 I/O modules. They offer inexpensive coupling of Active & Passive Interface Modules.

  • Pre-assembled control cable, 4 x 10 or 1 x 40 poles
  • Separate feeding of supply voltage via screw connection terminals
  • Isolation of potentials via plug-in cross-connectors

If you are looking for Weidmuller Pre-Cabling System for Byte, please call us on (844) 331-9375 or email us at info@clrwtr.com we will do our best to help you find the Weidmuller Front Adapter for PLC S7 that you are looking for at the most competitive prices possible. If you are searching for Weidmuller Micro Interface Digital technical information (data-sheets) please use the datasheets or product selection guide page links.

Weidmuller Adapter for MICROSERIES Relays & Optocouplers Distributor
Micro Interface Digital

Micro Interface Digital

  • Specific adapter to be connected to the MICROSERIE RELAYS using a 10-pole flat-cable connector or 15-pole Sub-D connector.
Weidmuller PAC #96 Pre-Assembled Cables Distributors
PAC #96 Pre-Assembled Cables

PAC #96 Pre-Assembled Cables

With help of this cabling system for the key Siemens S7-300 and S7-400 input/output cards, users can design a byte-connection system for both digital inputs and outputs. This system consists of:

  • Cable with front adapter for the PLC and standard flat cable connectors for the interface.
  • Passive interface or per-relay in byte mode (shared supply in groups of eight signals).
  • Quicker project planning and initial commissioning.
  • Saves time during the installation.
  • Space-saving.
  • Elimination of wiring mistakes.
Weidmuller Direct Input/Output Digital Interfaces Distributor
PLC Input/Output Module

PLC Input/Output Modules

Passive and relay interface elements for 32 or 8 signals, allowing for the efficient connection of peripheral sensors and actuators to the principal Siemens S7-300 and S7-400 input/output cards through the pre-assembled cables. The principal features are:

Weidmuller Preassembled Control Lead Distributors
Pre-Assembled Control Cable

Pre-Assembled Control Cable

  • The pre-assembled control cables have pluggable 10- or 40-pole socket blocks according to IEC 603/1 DIN 41 651.
  • They can be used to connect the PLC front adapter to the active or passive Weidmuller interfaces.
  • They are available in different lengths.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some Weidmuller products enabling us to further assist you in finding the correct PAC #96 pre-assembled cables in the USA, Mexico and Canada. Whether we have PLC input/output modules in stock in Boise, Idaho USA or need to ship direct from Weidmuller to any USA cities; Clearwater Tech can get pre-assembled control cable to you fast and save you some money! It will be very helpful if you have the Weidmuller cable with front adapter for Siemens S7-300 PLC part numbers ready, then our sales representatives can provide you with a pricing and availability quote for standard flat cable connectors that you are looking for in seconds. If you do not have the part numbers for front adapter for PLC S7, our application engineers will be able to help you figure out the part numbers and get the quote to you as soon as possible.

Siemens S7-300
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

S7-400 Input/Output Cards
Cable with Front Adapter
Standard Flat Cable Connector
Clearwater Tech   © 2011 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY