May 11, 2011
NK Switches
AS1 DODC Series AC Current Relay
with dual output is ideal for applications where users want to monitor multiple loads simultaneously and alarm when cumulative
current draws each or exceed desired setpoints. Combining the setpoint, LED indication and output functions of multiple sensors
into one space-saving package, the AS1 DODC Series allows OEMs to tailor individual trip points to specific processes and
trigger independent contacts.
|
SSAC Monitors
The TCS Series is a Low Cost Method
of GO/NO GO current detection. It includes a solid state output to sink or source current when connected directly to a
standard PLC digital input module. Its normally open or normally closed output can also be used to control relays, lamps,
valves, and small heaters rated up to 1 A steady, 10 A inrush. The TCS is self-powered & available with an adjustable
actuation range of 2 to 20 A
|
|
|
|
 |
(800) 894-0412 (888) 723-4773 (Fax)
info@clrwtr.com |
Output Loop Powered |
Output-Current Loop-Powered AC Current Monitoring Components
The input side, that is selectable in three zones, can be used to measure single-phase AC currents up to
10 A. The input and output circuits are designed in isolation with 4-kV. The monitoring components come in a 17.5-mm-wide
WAVEBOX housing. They are supplied via the 4 - 20 mA output-side current loop and, thus, can be specially used in
applications of process automation.
- WAS1 CMA LP 1/5/10A AC
- WAZ1 CMA LP 1/5/10A AC
|
|
If you are looking for Weidmuller Current Monitoring Components, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com
we will do our best to help you find the Weidmuller Relay Output Current Monitoring that you are looking for at the most
competitive prices possible. If you are searching for Weidmueller Analog Output Current Monitoring technical information
(data-sheets) please use the datasheets or product selection guide page links.
|
Passive Measuring Transducers |
Measuring Transducer for AC Currents up to 500 A for Mounting on TS35 Rail
- The CMA current measuring transducer fulfill the accuracy class 1/1.5 with a residual current factor of < 5.
- The insulation voltage between the measurement circuit and output is 4 kV.
- The AC current measuring transducers are suitable for feeding through conductors with diameters up to 35 mm.
|
AUX Powered |
AC or AC/DC Current Monitoring Components with Analog Output & External Power Supply
- Depending on the version, the input side can be used to measure single-phase AC currents or DC currents up to 60 A.
- The output side features switchable analogue DC current/voltage signals.
- The input and output circuits are designed in isolation with 4-kV.
- The monitoring components come in a 17.5-mm-wide WAVEBOX housing.
- The 24-VDC supply is powered via the output or input circuit and can be
Bridged with ZQV 2.5N Cross-Connections.
|
|
Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some
Weidmuller products enabling us to further assist you in finding the correct Weidmuller CMA 100/5A in the USA, Mexico and
Canada. Whether we have Weidmuller CMA 250/5A in stock in Boise, Idaho USA or need to ship direct from Weidmueller to any USA
cities; Clearwater Tech can get Weidmuller CMA 500/5A to you fast and save you some money! It will be very helpful if you
have the AUX powered current monitoring modules part numbers ready, then our sales representatives can provide you with a
pricing and availability quote for output loop powered current monitoring modules that you are looking for in seconds. If
you do not have the part numbers for passive measuring transducers, our application engineers will be able to help you
figure out the part numbers and get the quote to you as soon as possible.
|
|
|
|
 |
|
| Part Number: |
|
|
Can't find a part number?
E-mail Us! |
|
|
