Weidmuller

Home   >   Products   >   Weidmuller   >   DC/DC 3-Way   >   Isolators

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

10Hz max. Frequency

• The WAS5 isolating transformers convert standardised analogue input signals into analogue output signals.
• The 3-way isolation between input/output and supply voltage is designed for 4 kV.
• The transmission frequency is 10 Hz. The isolating transformers are 17.5 mm wide and are incorporated in a WAVEBOX enclosure. Power supply can be cross-connected via ZQV 2.5N plug-in cross-connectors.

If you are looking for Weidmuller DC/DC 3-Way Isolators, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Weidmuller 10Hz max. Frequency DC/DC 3-Way Isolators that you are looking for at the most competitive prices possible. If you are searching for Weidmuller 20kHz max. Frequency DC/DC 3-Way Isolators technical information (data-sheets) please use the datasheets or product selection guide page links.

DC/f Converters

• These DC/f converters are just 6 mm wide and convert standardised analogue signals (0 to 10 V, 0 to 20 mA, 4 to 20 mA) into frequencies of up to 16 kHz. The frequency range can be switched between four ranges: 1/4/8/16 kHz. These components can be used to import analogue signals from the field into meter cards in the PLC. Shielded and twisted lines are recommended for the connection on the output side.

20kHz max. Frequency

• The WAS5 isolating transformers convert standardised analogue input signals into analogue output signals.
• The 3-way isolation between input/output and supply voltage is designed for 4 kV.
• The transmission frequency is 20 kHz. The isolating transformers are 17.5 mm wide and are incorporated in a WAVEBOX enclosure. Power supply can be cross-connected via ZQV 2.5N plug-in cross-connectors.

DC/DC Select

• The MAS DC/DC select, with configurable input and output parameters and just 6 mm wide, ensures maximum flexibility in the smallest of spaces.
• The isolating transformer can be adjusted via DIP switches. The 24 V DC voltage supply can be breached module by module using ZQV 4N Plug-in Cross-Connectors.
• The electrical 3-way isolation has a rating of 500 V/ 2.5 kV.

WAVEPak Programmable Signal Isolators

• Single & Dual Channel Supply Isolators with auxiliary power supply
• The WAVEPak supply isolator is designed for the transmission of analogue voltage or current signals. It is a four-wire DC supply isolator with complete three-way isolation between the input, output and supply. The supply isolator is suitable for the transfer of all standard DC/voltage signals. It delivers measurements with an accuracy of 0.1 % (typically 0.05 %). An input-side 24 VDC is available for providing power supply to external sensors.

Pro DC/DC Isolator

• Input and output parameters of the WAVE PRO DC/DC can be configured as required via DIP switches.
• The signal disconnector measuring 12.5 mm wide has a large supply voltage range of 20 to 230 V AC/DC. The transmission frequency can be set between 10 Hz and 20 kHz.
• To help with setting, use the WAVETOOL program available from Weidmüller's website.
• Power supply can be cross-connected via ZQV 2.5N plug-in cross-connectors.

ACT20M - The Innovative, New Dimension for Converting & Isolating Analogue Signals Housed in a 6 mm width

• The new ACT20M product line unites innovative technology with maximum functionality in an electronics housing that is only 6 mm wide. Up to two channels per module help to save space in the electrical cabinet. High galvanic isolation of 2.5 kV and an accuracy of up to 0.05 % strengthen the reliability and safety of the process.

• The product line includes passive isolators (1 or 2 channel), universal temperature converter, DC converter and signal splitter. Eight connections facilitate additional functionality such as signal splitting with sensor supply.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some Weidmuller products enabling us to further assist you in finding the correct Weidmuller DC/DC 3-Way Isolators in the USA, Mexico and Canada. Whether we have Weidmuller 20kHz max. Frequency DC/DC 3-Way Isolators in stock in Boise, Idaho USA or need to ship direct from Weidmuller to any USA cities; Clearwater Tech can get Weidmuller 10Hz max. Frequency DC/DC 3-Way Isolators to you fast and save you some money! It will be very helpful if you have the Weidmueller DC/DC 3-Way Isolators part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Weidmuller 20kHz max. Frequency DC/DC 3-Way Isolators that you are looking for in seconds. If you do not have the part numbers for Weidmuller 10Hz max. Frequency DC/DC 3-Way Isolators, our application engineers will be able to help you figure out the part numbers and get the quote to you as soon as possible.