Clearwater Tech Logo


Home   >   Products   >   Weidmueller   >   DPA Series   >   2-Channel   >   Modules   >   for Alarm Monitoring


Modules in the DPA Series are used for alarm monitoring. They can be configured for a wide variety of industrial signals and feature two alarm outputs. Setpoint values and deadband can be individually adjusted by using a potentiometer.

Weidmuller DPA Series Auxiliary Powered Dual Setpoint Alarms Process Monitoring Modules Distributors

with Relay Output

The deadband reduces chatter from the monitoring relay during switching operations. The reset point of the alarm contact is individually adjusted in this case away from the hysteresis (setpoint). In order to generate an alarm in the event of a power outage, the user should select the "energized" operational status for one or both of the output relays. A high/low-trip switching behaviour can also be set independently for each channel.

The following analogue input signals can be processed by the DPA Series: temperature (thermocouple and PT100 temperature detector), AC/DC currents/voltages, frequencies, measuring potentiometers, differential currents and differential resistances.

The housing can be snapped onto a DIN TS 35 or TS 32 mounting rail. The pluggable screw connection is located on the front.

If you are looking for Weidmuller DPA Series Process Instruments, please call us on (844) 331-9375 or email us at we will do our best to help you find the Weidmueller DPA series signal converter that you are looking for at the most competitive prices possible. If you are searching for Weidmuller two-channel module technical information (data-sheets) please use the datasheets or product selection guide page links.

Technical Features:

  • A wide variety of versions available for many types of input signals
  • Two independent alarm channels with relay output
  • LED status display
  • Min./max switching commands in any combination
  • High repetition accuracy
  • Deadband/setpoint adjustment on front panel
  • Complete electrical isolation to 2 kV
  • DC power supply
  • Pluggable screw-connection mechanism
  • Compact metal housing

Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some Weidmuller products enabling us to further assist you in finding the correct Weidmuller DPA series module in the USA, Mexico and Canada.

Whether we have Weidmuller DPA series in stock in Boise, Idaho USA or need to ship direct from Weidmuller to any USA cities; Clearwater Tech can get Weidmuller 2-channel module to you fast and save you some money!

It will be very helpful if you have the Weidmuller two channel modules part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Weidmuller DPA series modules that you are looking for in seconds.

If you do not have the part numbers for Weidmuller DPA series signal converters, our application engineers will be able to help you figure out the part numbers and get the quote to you as soon as possible.

Stock Check

Part No:

Search Tips
Can't find a part number?
E-mail Us!

Panasonic Monitors

Without "Visualization", energy-saving measures will end in ineffective results. Discovering waste efficiently and taking measures, reduces energy consumption with maintaining comfort and leads to optimization. Easy installation from 1 unit is possible from Panasonic's large selection of energy-saving supporting devices. Possible to expand with confirming effectiveness. We propose a "Visualization" system that matches the customer needs.

Datalogic Controllers

The LFA Diagnostic Function is able to detect failures along the entire regulation loop, from the sensor to the actuator; moreover the regulation can be either automatic (closed loop) or manual (open loop), setting the output percentual value. The complete programming of the controllers is made through the front panel, with the possibility of including a 3 level software safety lock. The wide range of auxiliary functions available