Interfaces for IEC 603-1
Interfaces for IEC 807-2
Supply Voltage Distributor Module
Interfaces with RJ45 Connectors

IDEC AS-Interface

SwitchNet is an IDEC Trademark or pushbuttons, pilot lights, and other control units capable of direct connection to the AS-Interface. SwitchNet devices are completely compatible with AS-Interface Ver. 2.1. IDEC SwitchNet is available in the L6 series16mm and HW series 22mm panel cutout. It features a spring clamp terminals for easy wiring. Illumination can be adjusted in four level of brightness. There are 216 models of HW series and 277 models of L6 series

Toshiba Modules

Toshiba GCF612 is a multi function serial communications module for the V2000 Series S2T PLC. It communicates directly with the S2T CPU via the station bus. The GCF612 has three modes of operation. All three modes can be used simultaneously. Computer Link mode allows multiple V2000 S2T CPUs to be connected to higher level controller (master computer, MMI/OIS, or the T-PDS programming software.

Weidmuller

Loading

Home   >   Products   >   Weidmuller   >   General Applications   >   Interface

Weidmuller

(844) 331-9375       (888) 723-4773 (Fax)
info@clrwtr.com

Weidmuller IEC 603-1 Interface Units Tension-Clamp Screw Connection RS-45 Compact Distributors
for IEC 603-1

Interface Elements for IEC 603-1

  • Passive interfaces for signal transmission on an IEC connector equipped with a Clamping-Yoke or Tension-Clamp Connection in accordance with IEC 603-1 / DIN 41651.
  • There is a one-to-one connection between the two inserts.
  • The product line includes male and female headers ranging from 10 to 64 poles.

If you are looking for Weidmuller Interface Elements for General Applications, please call us on (844) 331-9375 or email us at info@clrwtr.com we will do our best to help you find the Weidmuller Interface Element IEC 603-1 that you are looking for at the most competitive prices possible. If you are searching for Weidmuller Interface Units technical information (data-sheets) please use the datasheets or product selection guide page links.

Weidmuller Interface Units IEC 807-2 Tension-Clamp Screw Connection RS-45 Compact Distributor
for IEC 807-2

Interface Elements for IEC 807-2

  • Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652.
  • There is a one-to-one connection between the two inserts.
  • The product line includes male and female headers ranging from 9 to 50 poles.
  • These inserts have a SubD metal housing and are therefore perfect for transmitting analogue signals or for connecting shielded cables.
Weidmuller 2, 3, 4 & 6 Potentials Supply Voltage Distributor Modules Distributors
Supply Voltage Distributor Module

Supply Voltage Distributor Modules

  • Potential distributors are used in housings or electrical cabinets for arranging and distributing potentials.
  • These interfaces can distribute between 2 and 6 potential voltages (AC or DC).
Weidmuller Interface Units with RJ45 Plug Connector Distributor
Interface Elements with RJ45 Connector

Interface Elements with RJ45 Connectors

  • The line of RS RJ45 interfaces provides a convenient, simple alternative for connecting modems, routers, PCs or other communications equipment with existing components within the electrical cabinet.
  • They can be used to adapt the shielded, 8-pole RJ-45 contact inserts to a screw connection or two data cables.
  • The modules can be attached to standard, TS32 or TS35 mounting rails.
Weidmuller Interface Elements for RS ELCO Connectors Distributors
Interface Elements for ELCO Connector

Interface Elements for ELCO Connectors

  • ELCO contacts inserts are used in electrical power plants, refineries and a variety of process applications - wherever stable and reliable signal transmission is required.
  • The ELCO connector features both a reliable connection system and a high signal capacity.
  • The line of RS ELCO interfaces and pre-assembled PAC ELCO cables is a specially designed solution for these requirements.
Weidmuller Interfaces with Diode Switching Distributor
Interfaces with Diode Switching

Interfaces with Diode Switching

  • Interfaces with diodes for surge voltage protection, lamp testing or protection against reversed polarity.
  • RSD A & RSD K with joint anode or cathode
  • RSD with open diode connections
Weidmuller RSD Diodenbox 8 Di 3A 1600V Interfaces with Diodes Distributors
Diode & Resistor Modules

RSD Diodenbox 8 Di 3A 1600V

Weidmuller has developed a compact, rail-mount solution that brings together the required functions into the smallest possible form factor. The compact assembly allows 8 resistors with 3 watts or 8 power diodes with 3 amps to all be put into a single housing. Compared to conventional modular solutions, this compact solution uses more than 50 percent less space on the mounting rail.

The modules make use of a special circuit board to divert the heat generated from the components to the housing. The housing then functions as a heat sink by dispersing the heat to the surrounding air. Because of this efficient heat transfer system, these modules can be used reliably with surrounding temperatures of up to 70°C. The housing also ensures that the module is resistant to vibration so that it can function smoothly when installed in train electrical cabinets.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some Weidmuller products enabling us to further assist you in finding the correct supply voltage distributor module in the USA, Mexico and Canada. Whether we have interface elements with RJ45 connector in stock in Boise, Idaho USA or need to ship direct from Weidmuller to any USA cities; Clearwater Tech can get interface elements for ELCO connector to you fast and save you some money! It will be very helpful if you have the Weidmuller interface units for general applications part numbers ready, then our sales representatives can provide you with a pricing and availability quote for interface with diode switching that you are looking for in seconds. If you do not have the part numbers for diode & resistor modules, our application engineers will be able to help you figure out the part numbers and get the quote to you as soon as possible.

Interfaces for ELCO Connectors
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

Interfaces with Diode Switching
RSD Diodenbox 8 Di 3A 1600V
Diode & Resistor Modules
Clearwater Tech   © 2011 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY