Clearwater Tech Logo
Home | Contact Us
(844) 331-9375


Home   >   Products   >   Weidmueller   >   JACKPAC IP67   >   M12 Signal Box


(844) 331-9375       (888) 723-4773 (Fax)

JACKPAC Relay Module

The JPR relays in their IP 68 JACKPAC enclosures are available with and without electrical isolation. The switching amplifier amplifies 24 Vdc switch outputs to max. 2 A. The switching voltage at the output is fed via a T-junction.

  • The switching amplifiers are simply built into actuator system controls.
  • For example, switching outputs can be amplified from 24 V DC / 0.5 A to 24 V DC / 2 A.
  • Optionally with galvanic isolation for insulating between the input and output circuits, which prevents conducted interference on the switching output.
  • Switched voltage feed at output via T-distributor
Weidmuller JACKPAC Switching Applifiers Distributors

JACKPAC Relay Module

If you are looking for Weidmuller JACKPAC IP67 M12 Signal Box, please call us on (844) 331-9375 or email us at we will do our best to help you find the Weidmuller JACKPAC Relay Modules that you are looking for at the most competitive prices possible. If you are searching for Weidmuller JACKPAC Timers technical information (data-sheets) please use the datasheets or product selection guide page links.


Signal extenders can be simply connected on the cable between the sensor and the input modules. They extend the pulse length from 1 ms. to 50 or 100 ms. Short sensor signals can also this enables short sensor signals to also be reliably recognized and evaluated by the controller.

Timing relays are used in automation engineering in order to compensate for malfunctions caused by high clock rates. Short pulses are extended and hence are reliably identified by downstream control components. Various timing functions such as make and break delays, clock generator and star/delta switchover are available to users.

Weidmuller JACKPAC Time Relays Distributor


Signal Inverters

Signal inverters convert PNP sensor signals to NPN signals and NPN signals back to PNP. Thus, existing circuits require no complex adaptation and the existing inputs on the I/O cards can be put to best use. This is particularly well suited for the Asian and North American markets.

The JPP level converters convert NPN signals into PNP signals and vice versa. This guarantees optimum adaptation to existing circuits.

Weidmuller JACKPAC Signal Inverters Distributors
Signal Inverters

Test Adapter

The new JACKPAC test adapter now provides a simple way of intervening in an M12 network. It can be integrated at any point and enables quick and easy connection of a testing device via the 5 PUSH IN connections. Status indicators show the status of the 2 signal channels as well as the 24 VDC auxiliary voltage. The following products are available as functional components:

  • Switch and button components in a sealed built-in EG2 enclosure
  • Rectifier and fuse components in a sealed built-in EG2 enclosure
  • Logic components with AND, NAND, OR and NOR operators
  • Diode gates with up to 40 inputs in open design
  • Components modules for the integration of electronic elements
  • Serial interface converter, & AD/DA converter
Weidmuller JACKPAC Test Adapters Distributor

Test Adapter

1-Stage & 3-Stage Surge Protection

The surge protection is plugged in to protect the sensitive electronics in the signalling circuit. The suppression circuit with varistor suppresses the induced voltage in solenoid valves. The PE connection leaves the housing via a separate line. The green/yellow earthing cable must be connected to the system east to ensure reliable discharge of interference pulses.

Jackpac OVP terminal equipment against the overvoltages that can occur as a result of atmospheric discharges or storms. This type of protection in the form of an adapter is available in IP20 and IP67 versions and complies with the requirements of class III to IEC 61643-21.

Weidmuller JACKPAC 1-Stage & 3-Stage Surge Protection Distributors

1-Stage & 3-Stage Surge Protection

Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some Weidmuller products enabling us to further assist you in finding the correct Weidmuller Signal Inverter in the USA, Canada and Mexico. Whether we have Test Adapters in stock in Boise, Idaho USA or need to ship direct from Weidmuller to any USA cities; Clearwater Tech can get JACKPAC Relays to you fast and save you some money! It will be very helpful if you have the JACKPAC Timer part numbers ready, then our sales representatives can provide you with a pricing and availability quote for JACKPAC signal inverter that you are looking for in seconds. If you do not have the part numbers for JACKPAC test adapters, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips

Can't find a part number?
E-mail Us.

TURCK Junction Box

Connectorized Inputs & Outputs in a fieldbus system are extremely effective and will reduce hours of costly wire installation. In addition to installation, network maintenance is improved with TURCK's complete line of industrial grade plug-and-play cordsets and receptacles. TURCK has three standard connector types for network products. Specifically, the 7/8-16UN minifast, M12x1 eurofast and the M8x1 picofast.

SymCom Monitors

When a Harmful Condition is detected, the unit's output relay is deactivated after a specified fixed trip delay. The output relay reactivates after power line conditions return to an acceptable level and a specified fixed amount of time has elapsed (restart delay). The trip delay prevents rapid or short cycling due to rapidly fluctuating power line conditions. The 201A is an auto ranging 8-pin, plug-in voltage monitor designed to protect 190-480VAC,