Clearwater Tech Logo
Home | Contact Us
(844) 331-9375


Home   >   Products   >   Weidmueller   >   MICROOPTO   >   Switching   >   Amplifier   >   Relays


(844) 331-9375       (888) 723-4773 (Fax)


The MICROOPTO family offers the customer high-quality optos and solid-state relays for application-oriented problem solutions. All products are designed in the space-saving 6 mm terminal size. The new solid-state relay can be connected in the output circuits of control systems and feedback control modules for selective activation of inductive loads up to 24 V DC/10 A, such as solenoid valves, contactors etc. The error controlled output monitors short-circuts and, if necessary, switched off; a potential-free signalling contact provides feedback to the control system - the system can be shut down in a controlled manner for error rectification.

The powerful output of the MICROOPTO SOLENOID switches 10 A at 55 °C. The product can be used worldwide thanks to international approvals: CE, cULus and GL.

Weidmuller MICRO OPTO Solid State Relays Distributor

If you are looking for Weidmuller MICROOPTO, please call us on (844) 331-9375 or email us at we will do our best to help you find the Weidmuller MICROOPTO Opto Modules that you are looking for at the most competitive prices possible. If you are searching for Weidmuller MICROOPTO Solid State Relays technical information (data-sheets) please use the datasheets or product selection guide page links.

The MICROOPTO SOLENOID solid-state relay is used specifically as a switching amplifier for actuators up to 24 V DC and 10 A with inductive loads such as solenoid valves and contactors. A potential-free signalling contact transmits errors, such as short circuits, to the controller. The MICROOPTO SOLENOID solid-state relay is short-circuit-proof and protected against power-related transients and voltage peaks by extensive protective circuits. The closed housing also offers a high level of protection against contact.

The solid state relay MICROOPTO 300 V DC has been developed as a switching amplifier for high inductive loads up to 300V DC and 1 A in motor brakes and contactors. A power boost in the load circuit compensates transient overloads (20 A for 20 ms / 5A for 1s) such as making or breaking spikes. Additional protective circuits counter higher overloads.

The solid-state relay MICROOPTO ACTOR has been specifically designed as a switching amplifier for actuators up to 24 V DC and 2 A with inductive loads such as solenoid valves and contactors. 3-wire actuators can be connected directly to the module. This is short-circuit proof and protected against application-related transients and spikes by extensive protective circuitry.

Electronic CO contacts are used anywhere output signals need to be changed over. For this purpose, the input signal is directly switched through to the output side and inverted; as a result, the opto module can also be used as a pure inverter. The advantage over electromechanical relays lies in the wear-free switching and the possibility of releasing high switching frequencies.

A special interior circuit in the opto module MICROOPTO 100 kHz ensures that rapidly transmitted signals are isolated from one another and that they can be transferred practically without delay. This allows switching frequencies up to 100 kHz to be achieved. Comprehensive suppressor circuits safeguard the module against conducted transients and voltage spikes.

To adjust sensitive TTL signals to the typical voltage level of 24 V DC used in industrial automation applications, the MICROOPTO TTL modules are used. For the protection of the electronics, the sensitive TTL signals require electrical isolation from the 24 V world. To control the optical coupler circuit via the 5 V TTL signal, an additional auxiliary voltage is fed in.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some Weidmuller products enabling us to further assist you in finding the correct Weidmuller MICROOPTO relay modules in the USA, Canada and Mexico. Whether we have MICROOPTO solid-state relays in stock in Boise, Idaho USA or need to ship direct from Weidmueller to any USA cities; Clearwater Tech can get Weidmuller MICROOPTO relay module to you fast and save you some money! It will be very helpful if you have the MICROOPTO relay modules part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Weidmuller MICROOPTO solid-state relay that you are looking for in seconds. If you do not have the part numbers for MICROOPTO Switching Amplifier, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips

Can't find a part number?
E-mail Us.

TURCK Repeaters

The Single-Channel Intrinsically Safe Interface will power a 2 or 3-wire HART transmitter or a separately powered field device. It will retransmit the 0/20 mA or 4/20 mA signal from a hazardous area, and repeat the signal in the non-hazardous area as a 0/20 mA or 4/20 mA signal reflecting the hazardous area input. The device will also accept a sourced 0/20 mA or 4/20 mA signal from a separately powered field device and repeat this signal

Red Lion Converters

The Fiber Optic Port is available with 10BaseFL or 100BaseFX speeds supporting industry standard SC or ST fiber connectors. The N-Tron series 102MC industrial media converters feature an operating temperature up to -40° to 80°C for use in extreme environments. Housed in a metal enclosure with DIN-rail mounts and ESD protected circuitry, our media converters will remain running trouble-free for years.