The right built-in connectors for the motors and M12 lines enable a complete Plug-and-play solution. Connection terminals up to 6 mm2 minimise power losses up to the distributor. Using our Product Assistant, you can put together your connector solution in no time according to your individual requirements and specifications.
Self assembled M8 and M12 connectors are integral and essential connectivity components. They are available with a wide variety of different wire connection methods. Weidmuller offers all of the secure connection methods, which include screw, tension clamp, IDC or solder connection mechanisms. One highlight in this line are the shielded, D-coded M-12 connectors. They are available in male and female versions also with the tension-clamp connection. The eight pole screw connection connectors are a special favourite. These are available in shielded or unshielded versions.
If you are looking for Weidmuller Plug in Connectors & Protective Caps, please call us on (844) 331-9375 or email us at firstname.lastname@example.org we will do our best to help you find the Weidmuller Customisable Connectors that you are looking for at the most competitive prices possible. If you are searching for Weidmuller IDC Coding Systems technical information (data-sheets) please use the datasheets or product selection guide page links.
IDC Coding Systems
The insulation displacement connection on Weidmuller SAI distributors is presently the smallest and most robust IDC connection on the market. The connection element is available in 3 and 4 pole versions. The connection system enables you to perform individual fabrication of sensor/actuator cables quickly and reliably on the spot. Conductor cross sections are from 0.25 mm2 to 0.5 mm2.
M8 & M12 Insulation Displacement Connection (IDC)
The assembly of round plugs is very time consuming.
The cable has to be stripped and possibly also fitted with a wire end ferrule.
But the IDC plug in connector system enable Weidmuller to offer a quick fit connection system that saves users working time and hard cash.
The IDC quick fit quick connection system is available for M12 and M8.
Individual cable lengths are often required nowadays.
In order to meet these demands, Weidmuller offers a wide range of plug-in connectors for custom assembly.
Y-distributors are used to bundle and distribute multiple signals to save space.
Twin Plugs & Wall Bushings
Purpose built machines often require individual cable lengths for the initiator cables. In some cases, two cables have to be of different lengths even when going to the same connector position. To resolve this difficulty, we offer male and female connectors with two cable outlets that you can fabricate as you wish. The miniature twin plug is available with a 90° outlet and a straight outgoing cable direction. The 90° version can be twisted as you wish in steps of 90°. In general machine building, it is common to have cables passing through the walls of control cabinets. To meet the need for a wall penetration with M12 plug in connectors, the M12 bushing is included in the range. The wall bushings is available as 5 pole. In addition, a bushing for PROFIBUS plug in connectors (PB) is available.
Protective Caps for SAI Distributors
Self assembled M8 and M12 connectors are integral and essential connectivity components. They are available with a wide variety of different wire connection methods. Weidmuller offers all of the secure connection methods, which include screw, tension clamp, IDC-, Crimp or solder connection mechanisms. One highlight in this line is the shielded, D-coded M-12 connectors. They are available in male and female versions and with tension clamp connection. The eight pole screw connection connectors are a special favourite. These are available in shielded or unshielded versions.
Protects against external effects when the I/O is not in use. M5 for SAI M5 distributors, M8 for SAI M8 distributors, M12 for SAI M12 metal/IDC/universal distributors, M12 connector - Protection from external influences. For open plugs or sockets. For attaching to cable.
M5, M8 & M12 Built in Plugs
For connection of cables to sensors and actuators, different built in connectors are needed at the device end. M12 plug in connectors are available with the following numbers of poles: 4 to 5-pole and 8-pole. Built in connectors for M12 connections are all A-coded and have individual leads of 0.5 m. Fixing of the FP version is achieved with the supplied locknut. Also available are built in connectors that can be screwed in from the front. M8 connector requirements are covered by the 3 and 4 pole built in male and female connectors. Like the M12 built in connectors, these have a locknut for fastening into a housing wall. These connectors too have 0.5 m long leads attached. Of course, Weidmuller also offers corresponding built-in connectors for the smallest plug in connectors, M5. The M5 built in connector is available in 3 and 4 pole versions. This plug in connector too has a locknut. The individual lead length with M5 built in connectors is 0.2 m. The cross sections of the individually attached leads are available from the technical data of the various families of plug in connectors.
Valve Plugs for Custom Assembly
Valve plugs for custom cables are often incorporated when designing special machines. Such plugs are used to connect solenoid valves. Weidmuller valve plugs are available in all customary forms. The range includes form A, form B to industry standards and to DIN, and form C to industry standards and to DIN.
These valve plugs are available without circuitry in 3 pole and 4 pole versions. A flat gasket seal is included which, when screwed on, guarantees IP65 protection.
Protective Sleeve Adapter
In machine construction, it is very common for cables to be run in the open air. To be able to protect cables from damage through a wide range of causes such as rodents, it is sometimes necessary to protect the cable with a protective sleeve.
To fasten the protective sleeve to a plug in connector designed for custom assembly, Weidmuller offers a protective sleeve adapter. This adapter is used instead of the PG7 cable gland. The protective sleeve is quick to fit, protecting the cable straight away.
Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some Weidmuller products enabling us to further assist you in finding the correct Weidmuller M8 & M12 IDC Insulation Displacement Connectors in the USA, Canada and Mexico. Whether we have Y-Distributors/T-Pieces in stock in Boise, Idaho USA or need to ship direct from Weidmuller to any USA cities; Clearwater Tech can get Twin Plugs & Wall Bushings to you fast and save you some money! It will be very helpful if you have the Protective Caps for SAI Distributors part numbers ready, then our sales representatives can provide you with a pricing and availability quote for M5, M8 & M12 Built in Plugs that you are looking for in seconds. If you do not have the part numbers for Valve Plugs for Custom Assembly, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
NK Technologies VTD series voltage transducers are high-performance transducers for sensing voltage in DC powered installations. Applicable for use on circuits to 600 VDC, VTD voltage transducers provide a fully isolated, 4-20 mA output proportional to rated nominal voltage in DC circuits. Housed in a slim, compact, easy-to-install DIN rail mount enclosure, the VTD Series comes in a variety of nominal voltages. VTD transducers
Red Lion Meters
The CUB 5 Series features a five or eight digit reflective LCD display or a red/ green display with backlight. The intensity of the display can be adjusted from dark room applications to bright light applications. This easy to read display offers 12 mm character height, and offers NEMA 4X/IP65 protection. The CUB5 series provides a wide variety of inputs for industrial applications. CUB5 models cover both digital and analog signals including count,