Weidmuller

Home   >   Products   >   Weidmuller   >   Process   >   Monitoring Modules

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

The AR series of signal isolating converters, with alarm function for process automation, provide a flexible interface between the sensor and the control system. The output side features analogue standard signals and two relay outputs for limit monitoring. On the input side, parameters can be processed depending on the module.

This includes signal isolating converters for processing analogue signals such as current, voltage, temperature (PT100 & Thermocouple Sensors), frequency, conductivity, curve linearization/characterization, and additional math functions. The process monitoring components from the AR series come with a four-character, scalable LED display. The scaling of the input parameters is done automatically. External passive sensors can be supplied directly via the input circuit of the signal isolating converter. The user-friendly menus are easy and navigate and make it easy to configure the operating parameters.

If you are looking for Weidmuller Process Monitoring Modules, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Weidmuller DPA Series Relay Output Modules that you are looking for at the most competitive prices possible. If you are searching for Weidmuller Micromann R-Series Process Monitoring Module technical information (data-sheets) please use the datasheets or product selection guide page links.

The frequency isolating transformers with alarm function from the UPI series convert standard analogue current and voltage signals into a proportional frequency. Measurement errors (which can occur with low input frequencies) are eliminated with a programmable frequency suppression. In addition, a quadratic function linearizes the signals. External passive sensors can be supplied directly via the analogue frequency isolating transformer.

An alarm output is available for monitoring the input signal. The four-character LED display can be set universally. The corresponding scaling for the input parameters is then carried out automatically. The user-friendly menus are easy and navigate and make it easy to configure the operating parameters. Specific parameters can be selected and changed using the keyboard and display.

The limit-value monitoring modules from the R series feature two relay contacts on the output side for the alarm function. Each product version is designed for a defined type of signal and sensor. These include analogue signals such as current, voltage, temperature (thermocouple and PT100 sensors), frequency and conductivity. Monitoring components with temperature measurement inputs are equipped with wire break detection mechanisms.

They come standard with programmable functions for setpoint, deadband, high/low-trip switching behaviour, coil energizing and a variable timer delay on each channel. The XFAR (U/I input) features extra extensions to the standard functions. This includes an optional alarm function which can be configured in connection with various input parameters, such as a change in the signal frequency, a signal loss or for individual signal formats. The XFAR is equipped with two alarm outputs for more complex applications.

Modules in the DPA Series are used for monitoring limit values. They can be configured for a wide variety of industrial signals and feature two relay contacts for the alarm function on the output side. A potentiometer on the front side is used to custom adjust the setpoints and deadbands. The deadband reduces chatter from the alarm relay during switching operations. The reset point of the alarm contact is individually adjusted away from the hystereses (setpoint).

In order to generate an alarm in the event of a power outage, you should select the "energized" operational status for one or both of the output relays. A high/low-trip switching behaviour can also be set independently for each channel. The following analogue input signals can be processed with the current DPA series: temperature (thermocouple and PT100 temperature sensors), AC/DC currents and voltages, measuring wire and potentiometer positions, resistances, differential currents and differential resistances.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some Weidmuller products enabling us to further assist you in finding the correct Weidmuller DPA Series Relay Output 2-Channel Modules in the USA, Mexico and Canada. Whether we have Weidmuller Micromann AR Series in stock in Boise, Idaho USA or need to ship direct from Weidmuller to any USA cities; Clearwater Tech can get Weidmuller Micromann R Series Universal, Relay Output Modules to you fast and save you some money! It will be very helpful if you have the Weidmuller Process Alarm part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Weidmuller Micromann DPA Series Modules that you are looking for in seconds. If you do not have the part numbers for Weidmuller Micromann UPI-Series, our application engineers will be able to help you figure out the part numbers and get the quote to you as soon as possible.