Increase your efficiency. The PUSH IN connection method and the associated reduction in the number of versions will help you. Among the impressive features of the direct PUSH IN connection system are minimal wiring times and reliable, simple handling. Compared to the 3-conductor tension clamps, the direct PUSH IN system achieves time-savings of up to 50 % when connecting the conductor (3.5 seconds per conductor).
Turn five into three - that's the winning formula of the new P series with the PUSH IN connection system in which the pitches for 2.5, 4, 6 and 10 mm2 are each combined in one terminal block. That means you now need only three rows of terminals for wiring five pitches up to 16 mm2.
This innovative concept unites the efficiency of the wide pitch with the compactness of the narrow one. The result is a maximum rated current and minimum size at the same time. That eases the workload in purchasing, logistics and design.
If you are looking for Weidmuller P-Series Terminal Blocks, please call us on (844) 331-9375 or email us at email@example.com we will do our best to help you find the Weidmuller P-Series modular feed-thru terminal blocks that you are looking for at the most competitive prices possible. If you are searching for Weidmuller Push-In disconnect terminal blocks technical information (data-sheets) please use the datasheets or product selection guide page links.
The PDK two-tier modular terminals can feed two potentials in one terminal.
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed.
The PUSH IN contact's spring movement is limited by the spring stop mechanism, improper use is prevented by the design of the terminals.
Consequential reduction in variants, also for PE terminals.
The three terminal series PPE 2.5/4, PPE 6/10 and PPE 16 enable wiring with up to 16 mm2 to be carried out rationally. The long-term contact force between wire and busbar is ensured with a stainless steel spring. The busbar is made of copper with a tin alloy, this ensures a very low voltage drop.
Disconnect test terminals with Push In connections can be combined with fuse holders, component plugs and disconnect plugs. Increase your efficiency. The PUSH IN connection method and the associated reduction in the number of versions will help you.
Wiring time is significantly reduced with the direct insertion technique for solid-core and flexible stranded wires with ferrules thanks to the PUSH IN connection method - considerably quicker to connect and no need for additional tools.
Fuse terminal blocks equipped with screw caps are self-explanatory.
Electricians throughout the world can recognize them immediately.
They can be used and swapped out just like fuses. In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed.
Actuator & Installation
We have added the new 3-conductor installation terminal series with the "Push In" direct connection system to our already extensive range of modular terminals.
They are especially suitable for power distribution in building installations, and wiring is made very convenient with the Roof Style terminals.
The outstanding technical specification leaves no doubt: the performance features of a 4 mm2 terminal in the space of a 2.5 mm2 model.
Initiator & Motor Connection
Among the impressive features of the direct PUSH IN connection system are minimal wiring times and reliable, simple handling. Compared to the 3-conductor tension clamps, the direct PUSH IN system achieves time-savings of up to 50 % when connecting the conductor (3.5 seconds per conductor). The stripped solid conductor is simply pushed into the terminal as far as it will go - that's all there is to it. No tools are required, and the result is a reliable, vibration-resistant, gas-tight connection. Even flexible conductors with crimped wire end ferrules or ultrasonicwelded conductors can be connected without any problems.
Marshalling & Potential Distribution
On one hand, the additional signals for the automation need to be connected and processed. On the other hand this means using up more space and increased costs.
These challenges can be simply dealt with using Weidmuller's new marshalling and distribution terminals. The PRV, with its PUSH IN wire connection, is the most compact marshalling terminal worldwide. In comparison to conventional multi-tier terminals, the new marshalling and potential distribution terminal blocks have a higher contact density. Up to 50 % less space is used in the electrical cabinet with the optimised PRV design.
The accessories of the other ranges of modular terminals can also be used for the P-Series in order to reduce the number of variations. The accessories render possible appropriate solutions for all - even non-standard - tasks. The accessories must comply with the same quality standards as the modular terminals themselves.
The Weidmuller philosophy is to realise a multitude of applications with just a few parts. The component and isolating plugs (BEST and TNST) represent a logical extension of this cost-effective and efficient approach. The component plug can accommodate electronic components and connect them to the terminal. And once an isolating plug is removed, the clamping point is obviously disconnected. The opening is easy to recognise.
Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some Weidmuller products enabling us to further assist you in finding the correct test-disconnect terminals in the USA, Mexico and Canada. Whether we have modular fuse terminal blocks in stock in Boise, Idaho USA or need to ship direct from Weidmueller to any USA cities; Clearwater Tech can get installation terminals to you fast and save you some money! It will be very helpful if you have the Weidmuller push-in terminal block part numbers ready, then our sales representatives can provide you with a pricing and availability quote for marker holders that you are looking for in seconds. If you do not have the part numbers for patch and potential distributors, our application engineers will be able to help you figure out the part numbers and get the quote to you as soon as possible.
The BNH Series of terminals are a traditional screw terminal block. With full size screws (nut and bolt termination on larger models) and current ratings up to 150A, there is a BN series terminal block for almost any application. A UL94-V0 flammability rating ensures safety. Dust covers and fuse holders with optional blown fuse indication round out the offering. All models mount onto standard 35mm DIN rail.
Marathon Terminal Blocks
Devices Sold by Marathon Special Products provide for interconnection of electrical circuits and such are, or can be, points of live electrical contact. Developing custom products is why "special" is LITERALLY our middle name. Marathon Special Products' core value is to provide quality solutions to meet our customers' needs. Our product development team can quickly respond to your requests with the use of 3D modeling,