April 17, 2012
ABB Converters
The CC-E RTD/I
is a single-function temperature signal converter from the CC-E range. This converter, with 3-way electrical isolation, for RTD
sensors (PT100, 2- or 3-wire connection), operates with a rated control supply voltage of 110-240 V AC. It provides an input
temperature range of -50 to +50 °C and an output signal range of 4-20 mA.
|
Red Lion Converters
For Overspeed Detection,
when the input frequency (averaged over the Minimum Response Time) exceeds the Trip point, the IFMR trips the relay. With the
relay in the Trip condition, the input frequency must fall below the Release point for the relay to release. For Underspeed
detection, the relay trips when the input frequency (averaged over the Minimum Response Time) falls below the Trip
point.
|
|
|
|
 |
(800) 894-0412 (888) 723-4773 (Fax)
info@clrwtr.com |
ITXPlus Series |
ITXPlus Series Universal, Output-Current Loop-Powered Converters
- Universal loop-powered (two-wire) signal isolator/converter
- The ITXPlus is a compact, loop-powered, electrically-isolated,
Programmable Signal Isolator/Converter.
- On the input side, you can connect optionally DC-current/voltage signals, 2-, 3-, or 4-wire PT100s, and thermocouples.
- The ITXPlus measures, filters and separates the input parameters.
- It converts them into a proportional signal from 4 - 20 mA.
|
|
If you are looking for Weidmuller Signal Converters, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com we
will do our best to help you find the Weidmuller ACT20M-UI-AO Universal Signal Isolating Converter that you are looking for at
the most competitive prices possible. If you are searching for Weidmuller ITX+ Signal Isolating Converter technical information
(data-sheets) please use the datasheets or product selection guide page links.
|
ACT20M-UI-AO |
ACT20M-UI-AO Universal Signal Isolating Converter
- The 3-way electrical isolation of 2.5 kV and an accuracy of up to 0.05% both help to ensure a high degree of process
reliability.
- The signal isolating converter gets power from a 24 VDC external power supply.
- The feature set permits use in many applications around the world: a wide temperature range of -25°C (0°C) to +70°C and
international approvals (cULus, ATEX Zone2, FM Div2, GL, DNV).
- The power supply is simply snapped onto the CH20M DIN rail bus for fast and easy installation.
|
STG Series |
STG Measuring Bridge Converters
- Bridge measurement isolator/transformer with auxiliary power
- The STG bridge measurement transformer produces a bridge supply voltage which eliminates input-side wire resistance,
independent from the wire length.
- Tare adjustment controls and test points allow for easy adjustment to suit initial bridge loading.
- This product can be mounted on TS35 Rails.
- It delivers a stable bridge power supply, and is capable of supplying up to four 350-ohm measuring bridges.
|
|
Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some Weidmuller
products enabling us to further assist you in finding the correct ACT20M-UI-AO converter in the USA, Mexico and Canada. Whether
we have ITX+ converter in stock in Boise, Idaho USA or need to ship direct from Weidmuller to any USA cities; Clearwater Tech can
get universal, output-current loop-powered signal isolating converter to you fast and save you some money! It will be very helpful
if you have the ITXPlus converter part numbers ready, then our sales representatives can provide you with a pricing and
availability quote for universal signal isolating converter that you are looking for in seconds. If you do not have the part
numbers for ACT20M converter, our application engineers will be able to help you figure out the part numbers and get the quote to
you as soon as possible.
|
|
|
|
 |
|
| Part Number: |
|
|
Can't find a part number?
E-mail Us! |
|
|
