May 10, 2011
Exergen IR Scanners
The World's Smallest IRt/c's
are self powered, with K t/c output. For those special applications where mounting is impossible with standard sized sensors,
the micro IRt/c can go places no other IR sensors have gone before, with the same high performance as all of the IRt/c
products. Optics available are 1:2 (all temperature ranges available) and 4:1 (only calibrated for K-440F/220C).
|
Red Lion RTD
The IRMA
accepts a 2, 3, or 4 Wire RTD or resistance input and converts it into a 4 to 20 mA current output. The 4 to 20 mA output is
linearly proportional to the temperature or the resistance input. This output is ideal for interfacing to indicators, chart
recorders, controllers, or other instrumentation equipment. The IRMA is loop-powered which means that the same two
wires
|
|
|
|
 |
(800) 894-0412 (208) 368-0415 (Fax)
info@clrwtr.com |
WTZ4/WTS4 PT100 |
PT100/2/3/4-Conductor Transducer
- WTS 4 PT100/2 signal converters are incorporated in a 12.5 mm WAVEBOX enclosure.
- The components are distinguished with the following features:
|
|
If you are looking for Weidmuller Temperature RTD Signal Isolators/Converters, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com
we will do our best to help you find the Weidmuller PT100 2-/3-/4-Conductor Temperature Transducers that you are looking for
at the most competitive prices possible. If you are searching for Weidmueller RTD Signal Isolating Transformers technical
information (data-sheets) please use the datasheets or product selection guide page links.
|
MCZ PT100 CLP 0 - 300C |
MCZ PT100/3 CLP
- MCZ PT100/3 CLP Signal Converters are incorporated in a MCZ
enclosure just 6 mm wide.
- They are suitable for 2- and 3-conductor PT100 sensors.
- A 4 to 20mA current loop-fed signal is available on the output side.
- The modules exhibit high accuracy and linearity.
|
MAS/MAZ PT100 0 - 100C |
PT100 Output Select
- The MAS PT100 Isolating Transformers are
incorporated in the compact 6 mm MICROSERIES enclosure.
- The modules are characterised by the following features:
- 2-way isolation between input/output and power supply
- PT100 2-/3-conductor
- Output can be switched via DIP switch
|
WAS5 PRO RTD |
Variable RTD Signal Isolating Transformers
- The PRO RTD Signal Isolators/Converters are built into a
WAVEBOX enclosure just 17.5 mm wide.
- With the RTD, RTD100 and RTD Cu versions they can be used with virtually all PT100 sensors.
- The distinguishing features of these products are their 4 kV 3-way isolation and also their universal setting
options using DIP switches and potentiometers. To help with the settings, use the WAVETOOL program available from
Weidmüller's website. The 24 V DC power supply can be cross-connected using ZQV 2.5N plug-in cross-connectors.
|
|
Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some
Weidmuller products enabling us to further assist you in finding the correct Weidmuller Temperature RTD Signal
Isolators/Converters in the USA, Mexico and Canada. Whether we have Weidmuller PT100 2-/3-/4-Conductor Temperature Transducers
in stock in Boise, Idaho USA or need to ship direct from Weidmueller to any USA cities; Clearwater Tech can get Weidmuller MCZ
PT100/3 CLP Signal Converters to you fast and save you some money! It will be very helpful if you have the Weidmuller
Temperature RTD Signal Isolators/Converters part numbers ready, then our sales representatives can provide you with a pricing
and availability quote for Weidmuller MCZ PT100/3 CLP Signal Converters that you are looking for in seconds. If you do not
have the part numbers for Weidmuller PT100 2-/3-/4-Conductor Temperature Transducers, our application engineers will be able
to help you figure out the part numbers and get the quote to you as soon as possible.
|
|
|
|
 |
|
| Part Number: |
|
|
Can't find a part number?
E-mail Us! |
|
|
