Weidmuller

Home   >   Products   >   Weidmuller   >   Tension Clamp   >   Z-Series

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

Modular Feed-Through Terminals

• Z-series standard ranges provide solutions for conductor cross-sections from 0.05 to 35 mm².
• The compact roof-style terminal range for conductor crosssections 0.13 to 16 mm².
• In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed.

If you are looking for Weidmuller Z-Series Terminal Blocks, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Weidmuller Tension Clamp Terminals that you are looking for at the most competitive prices possible. If you are searching for Weidmuller Z-Series Feed-Through Terminal Block technical information (data-sheets) please use the datasheets or product selection guide page links.

Modular PE Conductor Terminals

• Terminal blocks in tension clamp system and the Z Series are specially customised to the customers' requirements.
• Less space, spacious labelling area, integrated test point, cross-connection functionality within the Z Series and other Weidmüller terminal lines.
• Z-Series terminals have a large clamping range and one or two cross-connection slots.

Modular Isolating Terminals

• Pluggable jumpers with locking clip for quick circuit manipulation
• Ideal for current transformer circuits
• Produce optional test applications with a variety of termination methods
• Rated for 600 V, 33 A, 20 to 8 AWG
• In standard and Roof Style forms

Modular Isolating Measuring Terminals

• The ZTL and ZTD terminal blocks for energy supply and power generation.
• The ZTD - the feed-through terminal, combined with ZTL, the terminal with a longitudinal isolator - offers you as power supplier the ideal solution for measuring, testing and replacing counters.

Modular Fuse Terminals

• The fuse terminals of the Weidmüller Z-Series are available in two different forms:
  • Fuse terminal with pivoting retaining lever
  • Fuse terminal with plug-in SIHA fuse holder

Modular Installation Terminals

• Installation terminals are used for power supply and distribution in small and sub-distribution boards in building installations and also in electrical cabinets.

Plug-in Modular Terminals

One terminal strip for the functional unit, One Plug-in Connector for the cable loom fabrication. All that remains to be done is to clip the two units together during final assembly - just like a plug-in connector. Finished!

Whether for railway engineering, mechanical engineering or ship building applications, all are served excellently by the products of the Weidmüller Z-Series. This is because the products are easy to use and practical, and the connections are simple, reliable and quick. Modular and flexible connection systems are especially in demand where complete functional units have to be prefabricated or replaced.

Modular Initiator/Actuator Terminals

The basis for this modular system is the side-by-side mounting of the individual modules of the distribution strips with their integral cross-connection. The female contact is on one side, the male contact on the other. Thanks to the modular thin-element design, variable distribution strips can be set up to suit the application. The base elements, which are clipped onto TS 35 terminal rails, form the supports for these module combinations.

Mini Modular Terminals

This range of small terminals with tension clamp connections enables the building of individual blocks with 2- and 4-pole terminals. Individual blocks are made up from the middle terminals plus end plates on the open sides. For a screw fixing, the first middle terminal plus the end plate are replaced by end terminals for the fixing. For the other types of fixing, middle terminals with a fixing option are included in the block or a mounting foot (MOFU) is fitted for attaching to the terminal rail.

Modular Terminals with Electronic Components

Modular terminals with diodes, LEDs, resistors and varistors solve a multitude of circuitry requirements. Electronic components can be integrated into the following versions:

• 2.5 mm²
• 4.0 mm²

Double / Multi-Level Terminals

• Terminal blocks in tension clamp system and the Z Series are specially customised to the customers' requirements.
• Less space, spacious labelling area, integrated test point, cross-connection functionality within the Z Series and other Weidmüller terminal lines.
• Z-Series terminals have a large clamping range and one or two cross-connection slots.

Accessories

Weidmüller offers users of modular terminals of the Z-Series a comprehensive range of accessories that render possible appropriate solutions for all - even non-standard - tasks. The accessories must comply with the same quality standards as the modular terminals themselves.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some Weidmuller products enabling us to further assist you in finding the correct miniature terminal blocks in the USA, Mexico and Canada. Whether we have WeiCoS - Weidmüller Connection System in stock in Boise, Idaho USA or need to ship direct from Weidmuller to any USA cities; Clearwater Tech can get ZVL 1.5 modular distribution system to you fast and save you some money! It will be very helpful if you have the modular feed-through terminals part numbers ready, then our sales representatives can provide you with a pricing and availability quote for modular PE conductor terminals that you are looking for in seconds. If you do not have the part numbers for modular isolating terminals, our application engineers will be able to help you figure out the part numbers and get the quote to you as soon as possible.