June 01, 2010
IDEC Power Supply
The Innovative Terminals on The PS5R Series
use a special, spring-loaded screw. This makes installation as easy as pushing down and turning with a screwdriver. Installation
time is cut in half since the screws do not need to be backed out to install wiring. The screws are held captive once installed
and are 100% finger-safe. Screw terminals accept bare wire or ring or fork connectors. Parallel operation only recommended for
PS5R-Q24, PS5R-F24 and PS5R-G24.
|
Red Lion Counters
The Model C48
Red Lion Controls counter is available as a standard counter or a batch counter. The standard counter is available with single or
dual presets. The batch counter has a main process counter with dual presets and a secondary counter with a single
preset.
Single, Dual, Or 3 Preset Version
|
|
|
|
 |
(800) 894-0412 (208) 368-0415 (Fax) info@clrwtr.com |
 MOVITRAC Series 07 |
"Unit modularity" and "smaller dimensions" are two of the most important criteria when selecting a frequency
inverter for a specific application. SEW-EURODRIVE is aware of these requirements and, as a result, has designed a compact and
economic solution with its target-specific development of the MC07 series: MOVITRAC B - the next generation frequency
inverter.
The unique modular architecture of SEW Eurodrive MOVITRAC
07 lets you configure each unit to the exact requirements of your application, easily and cost effectively. The full
range of SEW Eurodrive MOVITRAC frequency drive modules offers an array of advanced capabilities from high-speed fieldbus
networking to position, speed and synchronous operation control.
|
 Stainless Steel Helical & Helical Bevel Gear Reducers |
SEW-EURODRIVE announces the immediate release of the new RESF37 stainless steel helical gear reducer and
KESA37 stainless steel helical bevel gear reducer. Efficient, long-life helical and helical bevel gearing means these units use
less energy, run cooler and last longer than typical single-worm gear units. The material, design and smooth finish mean high
resistance to bacteria, chemicals and processes common to the food processing industry. Traditional single-worm reducers commonly
found on processing equipment are inefficient and wear over time. Helical bevel gears have an infinite life, and are 50% more
efficient than single worm gears.
|
 Energy-Efficient DR Series Motors |
SEW-EURODRIVE is excited to announce the new energy-efficient DR motor series as part of its line of highly
efficient drives and gearmotors. Designed to help you save money and energy, the modular DR motor offers millions of drive
combinations in three efficiency levels: standard, high efficiency, and NEMA Premium. The motor is specially designed for
high-cycling applications, up to thousands of cycles per hour. In addition, by installing the encoders behind the fan, we have
reduced the motor length, making it cost- and space-efficient.
|
 |
(800) 894-0412 (208) 368-0415 (Fax) info@clrwtr.com |
 AS-I Speed Monitors |
TURCK introduces a new AS-interface (AS-i) speed monitor that monitors safety speed and stop conditions on up
to two axes. The speed monitor, manufactured by Bihl+Wiedemann, is part of the large
range of AS-i safety products distributed by TURCK in the United States.
The speed monitor may be quickly programmed using a configuration push-button or by using AS-i control tools.
When the speed falls below the designated threshold, the device sends a signal to AS-i. An integrated chip card records the
programmed parameters so the device does not require reprogramming when accessing the machine after a controlled stop.
|
 |
(800) 894-0412 (208) 368-0415 (Fax) info@clrwtr.com |
 Sendix F36 Series |
TURCK has recently added a CANopen version to its line of F36 absolute encoders. The Kübler by TURCK F36
encoder series is characterized by its compact size, high performance and robust design, making them well suited for drive
engineering or medical technology applications.
Sendix F36 Series is the first optical multiturn encoders
without gears on the market, making them completely insensitive to magnetic fields. These encoders feature a hollow shaft diameter
up to 10 mm in a device of only 36 mm. Despite its compact design, it is IP67 rated and has a wide temperature range of -30 to
85°C. Using OptoASIC technology enables the F36 encoder to reach a high resolution of up to 16 bits for singleturn applications;
the multiturn version has a resolution of up to 32 bits.
|
 |
(800) 894-0412 (208) 368-0415 (Fax) info@clrwtr.com |
 EZ-LIGHT Traffic Light |
Preassembled indicators for signaling and traffic control, available with one, two, or three indicators.
- Preassembled indicators for signaling and traffic control, available with one, two or three indicators
- Intense levels of light output for outdoor applications
- Controlled field of view for signage and narrow lane use
- Rugged, cost-effective and easy-to-install
- Compact devices are completely self-contained - no controller needed
- Immune to EMI and RFI interference
- Choose NPN or PNP input, and 15 to 30V dc or 85-130V ac operation, depending on model
|
 R-GAGE QT50R Radar-Based Retroreflective Sensors |
Uses Frequency Modulated Continuous Wave (FMCW) technology for detecting moving and stationary targets
- Detects presence, absence or change information for a target, ignoring objects and backgrounds beyond the setpoint
- Operates at 24 GHz in the Industrial, Scientific and Medical (ISM) telecommunication band; no special licensing required
- Features rugged IP67 housing for harsh environments
- Withstands extreme temperature conditions and exposure to strong wind
- Detects vehicles at distances up to 15 m
- Includes DIP switches for sensing distance, sensitivity and output configuration
- Operates at 12 to 30V dc with bipolar PNP (sourcing) and NPN (sinking) output
- Delivers operating temperature range of -40° to +65° C
|
 LED Sealed Backlights |
This new rugged, waterproof and non-corrosive backlight is extremely bright providing even lighting from edge to
edge. In addition to being competitively priced, its features and performance are equal to or better than the competition.
- Rugged, waterproof housing, rated IEC IP67
- Mounts directly from the back or surface mount using available brackets
- Smooth exterior for easy cleaning
- Diffused backlights for any Vision system.
- Continuous or strobed operation is selectable via sensor software
- Solid-state LED matrix, in four sizes
- Available in four visible colors plus infrared
- Extremely bright light
- Completely non-corrosive
- Extremely even intensity edge-to-edge
- M12 connector
|
 |
(800) 894-0412 (208) 368-0415 (Fax) info@clrwtr.com |
 M 4/6, M 6/8, & M 10/10 Terminals |
Choose the M 4/6, M 6/8, and M 10/10 Entrelec Terminal Blocks for:
- Versatility : accommodate wire sizes from 22 to 6 AWG and multiple wire, wide current range.
- Flexibility : snap onto symmetrical and asymmetrical DIN rails.
- Modularity : respond quickly to design changes.
- UL, CSA, VDE, IEC and other worldwide approvals.
- Color coded bodies for circuit identification.
|
 |
(800) 894-0412 (208) 368-0415 (Fax) info@clrwtr.com |
 P7 Series VFDs |
The Yaskawa P7 inverter is the industrial fan and pump drive. It is the companion to the Yaskawa F7 drive in
fit and form. Yaskawa P7 inverter drive functionality is designed for variable torque applications like fans and centrifugal
pumps. It is supplied with V/F control and normal duty overload rating of 110% for one minute. Network communications, plug-in I/O
cards, and power/packaging options are available. With an optional phase-shifting input transformer, the Yaskawa P7 VFD inverter
drive dual-diode bridge can be operated in 12-pulse rectification mode, reducing input current harmonic distortion. The optional
Yaskawa P7 bypass package is a 3-contactor style bypass, allowing motor operation from the drive or across the line.
|
 |
(800) 894-0412 (208) 368-0415 (Fax) info@clrwtr.com |
 Series 1414 Enclosures |
Application
- Hammond series 1414 is designed for use as instrument
enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides a degree of protection from falling dirt, dust, oil and water.
Standards
- UL 508 Type 12 and 13
- CSA Type 12 and 13
- Complies with
- NEMA Type 12 and 13
- JIC EGP-1-1967 unless marked
- IEC 529, IP65
|
 |
(800) 894-0412 (208) 368-0415 (Fax) info@clrwtr.com |
 Cast Iron Motors |
With their cast iron construction and 1.15 service factor, AC motors are ideal for "tough to handle"
applications. LEESON 150 and 170-series cast iron motors are extremely versatile and can be field converted in minutes to a
number of different configurations, including:
- Severe Duty TEFC (using cast iron fan guard kit)
- F2 mounting (by reassembly)
- C face with rigid base (stock or using C face kit)
- D flange with base (using D flange kit)
|
 Company News |
News & Current Events @ Clearwater Technologies, Inc.
|
|
|
|
 |
|
| Part Number: |
|
|
Can't find a part number?
E-mail Us! |
|
|