These magnetic bearingless encoders are wear resistant and extremely durable. Their compact shape is especially suitable for tight installation spaces. In contrast to encoders with bearings, magnetic bearingless encoders can be designed with a large hollow shaft up to 390 mm, which in turn facilitates the best possible integration of bearingless encoders for any application.
These inclinometers were specially designed for outdoor use. The rugged housing, high protection rating and wide temperature range reinforce their reliability. Their low profile facilitates simple and flexible installation. The special feature of the IN81 / IN88 is its high precision, which remains stable even in harsh environments and during temperature fluctuations. The result is a consistent and optimum measurement for your system.
Frequency: f (kHz) ? f (Hz)
Frequency divider: HTL ? TTL; TTL ? HTL
Level converter: SinCos ? HTL / TTL; SSI ? HTL / TTL;
f (kHz) Analog; SSI Analog
Signal converter: ? 2x SinCos, 2x TTL / HTL;
2x TTL / HTL ? 2x TTL / HTL
Draw-wire C100 & D125. Length and inclination measurement with one single device! Draw wire system with integrated inclinometer. Measuring range up to 10 mAs they make a major contribution to automation and safety, sensors have become indispensable in mobile automation. Draw wire systems are the preferred choice for length measurement. Inclinometers are used e.g. for vehicle leveling.
Extremely robust and cost-effective Draw wire encoder D120 for outdoor applications. Measuring range 3-10 mKübler is known in many branches for its wide linear measuring technology portfolio. Premium quality and flexibility are the main features of this portfolio. In costsensitive branches the selection of the draw wire system is based mainly on robustness and cost-effectiveness. Kübler combined exactly these characteristics and added a new draw wire encoder family to its portfolio.
This leads to the question of the suitable interface for the application. Safety-oriented interfaces and single-cable technology belong currently to the main innovation trends in the electrical drive technology. Kübler follows this trend with new encoder solutions.
New EtherCAT singleturn and multiturn encoders in the robust Sendix design now complement the versatile Sendix absolut family from Kübler. Kübler is thus responding to the increasing importance of the new field bus generation with Ethernet technology.
New highly robust Absolute Singleturn encoder in compact 36mm format, with magnetic sensor technology from Kübler
The 3650 and 3670 series from Kübler offer a resolution of 9 bit with SSI, 4.. 20mA or 0 ..10V output. There is a suitable measuring range (45°, 90°, 180° or 360°) for every application. The encoders are particularly robust, compact and versatile.
If there is no more room for an encoder - then the answer lies in the rotary measuring system with magnetic rings from Kübler
The new magnetic rings RI20 from Kübler, combined with the proven LIMES sensor head, offer a particularly compact incremental rotary measuring system, ideal for installation areas where space is very tight.
DIGITRONIC Automationsanlagen GmbH, whose main business is the development and production of cam controls with the corresponding accessories, and Fritz Kübler Zähl- und Sensortechnik GmbH, manufacturer of encoders and counters, have formed a strategic partnership.
The new Profibus encoders are available either as singleturn with up to 16 bit resolution or multiturn with up to 28 bit resolution, all offering up-to-the-minute fieldbus performance in the application thanks to the latest Profibus-DPV0 profile and enhanced programming possibilities.
Kübler is setting new standards with its latest generation of incremental encoders. These versatile devices deliver high performance and offer the customer a wide spectrum of use as per the slogan “more compact, more varied and more sophisticated”.
Despite their high level of reliability when used in an industrial environment, encoders are not basically immune to all the stresses and strains imposed on them. So, for example, the high precision opto-electronic measuring systems are sensitive to bearing currents.
In the area of linear measuring technology, Kübler has just extended its wide range of draw-wire actuators with a new maxi draw wire that comes with up to 40 metres wire length. Kübler can now offer just the right draw wire solution for all conceivable standard lengths & distance measurements in machinery and plant construction.
The new CODIX 538 from Kübler can be integrated without difficulty into any CAN or CANopen network in order to display locally any user-defined value. Numerical values can be directly scaled using a factor or offset from the display device. The display has a floating decimal point that can be inserted in any position.
Kubler, the market leader in counters for energy metering, once again gives proof of its skills and expertise: alongside the classic micro counters in its K-Series the company offers high-quality cyclometer displays with stepper motor drive for electronic kWh meters.
With its new Setpoint Generator CODIX 533, Kubler is adding to its CODIX family of displays an output device for analogue voltages and currents, designed to open up new application possibilities in the fields of process technology and automation.
Process indicators and controllers for analogue input signals - with interfaces for easy programming
Kubler presents six new process indicators and process controllers, in DIN format 96 x 48 mm, equipped with RS232 and RS485 interfaces. The real advantage for the user is that the units can be programmed via these interfaces and that programmed data can be called up and then further processed.
Sophisticated process displays and controllers for analogue input signals - multitalented and user-friendly
With design and technology in mind, multifunctional and easy to handle, the Kübler Codix-Process Displays have always been highly appreciated by their users. Now the company presents these devices optimized with even better functions and operational possibilities.
New standards apply since September 1st, 2017 for all passenger and cargo elevators. The standards EN 81-20 and EN 81-50 have entered into force.