littelfuse blog

SymCom Auxiliary Products

Littelfuse 10/10/2018
SymCom Auxiliary Products

Enhanced ground fault protection, enclosures, diagnostic tool, enhancements/accessories for multiple SymCom products.

SymCom Auxiliary Products
Enclosure

Metal NEMA-3R electrical box (6" H x 6" W x 4" D) with lenses for viewing the single-phase PumpSaver status lights.
Part Number: NEMA-3R-L

SymCom Auxiliary Products
The RM-1000-ENCL

A steel enclosure for protecting a SymCom RM-1000 remote communications monitor from adverse affects of weather and vandalism, while allowing normal communications connections to the RM-1000 unit. Its superior design protects an RM-1000 from overexposure to UV sunlight as well as from hail during a storm, and it incorporates a seal around the opening in the back to seal the unit to the electrical box, keeping rain from contacting the RM-1000 connections. The enclosure also features a built-in padlock tab (padlock not included) to lock the cover to deter vandalism. (6.4" H x 6.3" W x 1.7" D)
Part Number: RM-1000-ENCL

SymCom Auxiliary Products
Electronic Megohmmeter

The Model M-500 is an automatic, portable, battery-powered insulation tester. This unit is specifically designed as an inexpensive alternative to costly swing needle megohmmeters. The M-500 measures insulation resistance values of motors, generators and transformers up to 1000 megohms at 500VAC, indicating the condition of insulation on the zone scale. Its compact design and ease of use makes the M-500 a great diagnostic tool for motor rewind shops, electrical maintenance personnel and pump installers.
Part Number: M-500

SymCom Auxiliary Products
Informer IR Kit

Can be used with the MotorSaver Model 455 and PumpSaver Models 111-Insider-P and 231-Insider-P. It simply attaches to the face of the unit to provide remote diagnostics without opening the panel.
Part Number: IR Kit-36 (36" long)

SymCom Auxiliary Products
The OL-RESET

Allows the 777 line of MotorSaver and PumpSaver products to be manually reset without opening the panel door. Simply connect the module to the 777 communication port, connect a wire to each of the two applicable pins on the OL-RESET and to a normally-open push-button switch (sold separately). Mount the push-button switch in a convenient location.
Part Number: OL-RESET

SymCom Auxiliary Products
777 Manual Remote Reset Kit (24" long)

allows the 777 line of MotorSaver and PumpSaver products to be manually reset without opening the panel door. Simply connect the 9-pin adapter to the 777 communication port and mount the push-button switch in a convenient location.
Part Number: 777-MRSW

SymCom Auxiliary Products
Octal Sockets for plug-in units.
 
Part Numbers:
OT08-PC (8-pin surface & DIN rail mountable)
RB08-PC (8-pin surface mountable)
OT11-PC (11-pin surface & DIN rail mountable)
SD12-PC (12-pin surface mountable)