nk technologies blog

nk technologies blog

  • Results per page:

of 1
28 Results

Monitor DC Current with New DT 3-Wire Current Transducer from NK Technologies

NK Technologies Current TransducerThe new DT Series 3-Wire Current Transducer from NK Technologies is specifically designed in a compact, space-saving case. The DT 3-Wire uses a common point for both power supply and output signal, and is factory calibrated for a single current range. This 3-wire method for DC current measurement keeps costs in check for projects where many sensors are needed. 
Read More

NK Technologies Introduces AGLD Fault Sensors: Large LED Display Allows Clear Viewing of Trip Point in Any Light Condition

AGLD Fault SensorNK Technologies now offers the AGLD Series Ground Fault Sensors to keep machinery and operators safe from accidental shocks. The AGLD’s one-piece, solid-core design allows for installation over wires feeding heavy loads.
Read More

NK Technologies Introduces CT-MS 5A Secondary Current Transformer with Split-Core Design and Larger Aperture for Easy Installation

CT-MS 5A Secondary Current TransformerNK Technologies has a new addition to its line of 5A Secondary Current Transformers. The CT-MS has CT-MS 5A Secondary Current Transformers split-core design and larger than average sensing window, making it ideal for installing over large wires or bus bars.
Read More

AGT Series Ground Fault Indicators from NK Technologies Combine Current Transformer & True RMS Signal in One Package

AGT Series Ground Fault IndicatorNK Technologies offers a wide range of ground fault indicators, including the AGT Series Ground Fault Indicator. The AGT Series produces an analog 4–20 mA signal proportional to earth or ground fault current.
Read More

Precision Calibrated Current Switches Simplify Installation and Improve Performance for Limit Alarm Applications

NK Technologies LogoNK Technologies introduces ASC Series Switches. Theses current operated switches are precision calibrated at the factory per customer specifications and guaranteed within 1% accuracy. Because the switch is factory calibrated, field installation time and effort is minimized resulting in significant cost savings and improved performance consistency.
Read More

Measure Three Phase Wattage Consumption with the New APT Power Transducer from NK Technologies

NK Technologies LogoNK Technologies introduces APT Series Power Transducers. The APT measures three phases of current and voltage and produces an industry standard analog signal proportional to the watts used. The monitor uses current transformers to measure the amperes, and the line voltage connects directly to the transducer, up to 600 VAC. By comparing the instantaneous current flow with the circuit voltage, the power factor, whether leading or lagging, allows the APT transducer to produce a signal directly proportional to the wattage used. 
Read More

Monitor Power with Flexible Cable-type Current Transformers from NK Technologies

NK Technologies LogoThe new CTRC AC Current Transformers from NK Technologies monitor circuits up to 2000 amps and produces a safe, low voltage output proportional to the RMS current value. This output is designed as an input to a power monitor or transducer, replicating the AC wave shape with phase angle resolution better than 2°.
Read More

More Simply and Effectively Monitor Heating Element Controls with ATH Series Current Transducers from NK Technologies

NK Technologies LogoNK Technologies introduces the ATH Series AC Current Transducer. The ATH is specifically designed to monitor power controlled by phase-angled fired, burst fired or time proportioned silicon-controlled rectifiers (SCRs) in heating applications, without requiring an external current transformer or shorting blocks.
Read More

Reliably Monitor Process Conditions Wirelessly with New WRT Transmitter/Receiver from NK Technologies

NK Technologies LogoNK Technologies introduces the WRT Series Wireless Data Transmitter/Receiver. This wired-to-wireless solution provides a self-managed mesh network that works with any RS485 network protocol to promote highly reliable system operation in new or retrofit applications. The system allows for wired and wireless equipment mixes to avoid radio signal obstacles.
Read More

Monitor Distorted AC Current with New ATPR Series Current Transducers from NK Technologies

NK Technologies LogoNK Technologies introduces ATPR “E-Out” Series AC Current Transducers. ATPR current transducers combine a current transformer with a true RMS signal conditioner in a single package. This enables the ATPR series to produce a 0-5 or 0-10VDC RMS output on distorted waveforms located in the output of variable frequency drives, phase angle fired heating controls, and on linear loads in “noisy” power environments. 
Read More

New DS1 Current Sensors from NK Technologies Detect Very Low DC Current Levels in Compact, Simple-to-Use Package

NK Technologies LogoNK Technologies introduces DS1 DC Current Sensors. DS1 current sensors feature a compact and non-adjustable one-piece design to deliver reliable detection of very low DC current levels in a wide range of applications.
Read More

Significantly Simplify Current Monitoring and Help Minimize Downtime with ASL Switches from NK Technologies

NK Technologies LogoNK Technologies introduces ASL Series AC Current Operated Switches. The ASL series features a patent pending and user-selectable linear setpoint adjustment, enabling users to reliably monitor current, simply, in a wide range of applications. The ASL series is available in a panel mounted solid- or split-core enclosure to simplify installation.
Read More

Benefit from Cost-Effective Motor Monitoring and Over-Load Protection with ASXP Current Sensing Switch from NK Technologies

NK Technologies LogoNK Technologies’ ASXP Current Sensing Switch is now available with a user-adjustable setpoint from 1-80A. ASXP Series Current Operated Switches are powered versions of the company’s popular current switches with integral time delay.
Read More

Simplify Current Load Monitoring and Help Keep Motors Performing Optimally with ASM Smart Switch from NK Technologies

ASM Smart SwitchNK Technologies introduces the newly re-designed ASM Series Smart-Switch. These self-calibrating switches use the actual load current to set the trip point and provide the simplest way to ensure that a motor is working properly.

Read More

Seamlessly Convert a CT Signal to a Standard 4-20mA Output with New CTC Signal Converters from NK Technologies

CTC Signal ConvertersNK Technologies introduces CTC Series Signal Converters.  With the CTC series users can utilize an existing standard 5 amp secondary CT or low voltage (0.333 VAC) ProteCT™ current transformer with non-contact ranges as low as 0-5 amps over a conductor to produce a standard 4-20mA two-wire, loop-powered signal.

Read More

Easily Monitor DC Current with New DT Series Current Transducers from NK Technologies

DT Series Current TransducersNK Technologies introduces DT Series Large Aperture Current Transducers.  The DT series combines a hall effect sensor and signal conditioner into a single package for use in DC current applications up to 1200 amps.

Read More

Easily Monitor Energized Circuits in Tight Spaces with new AS1 Compact Case Current Sensing Switch from NK Technologies

AS1 Current Sensing SwitchNK Technologies introduces the AS1 Series Compact Case Current Sensing Switch. With its tiny 1 inch housing, the AS1 is a compact and cost-effective solution that enables users to monitor an energized circuit in tight spaces.

Read More

Easily Monitor Current Usage of Loads up to 2000 Amps with ATCR Current Transducers from NK Technologies

ATCR Current TransducersNK Technologies introduces ATCR Series Current Transducers.  ATCR flexible loop current transducers are a perfectly matched and factory calibrated sensing coil and True RMS signal conditioner that use just two wires to provide the power supply and output signal, while eliminating the need to disconnect existing wires.

Read More

Maximize Motor and Drive Operating Life Prevent System Failures with new VTD High Performance Voltage Transducer from NK Technologies

VTD Voltage TransducerNK Technologies introduces VTD Series high-performance voltage transducers. Packaged in a compact and easy-to-install 35mm wide DIN-rail enclosure, the VTD series senses voltage in a wide variety of DC powered installations, including industrial motors, battery chargers, photovoltaic arrays and wind generators.

Read More

NK Technologies Introduces Ampflasher™ Current Indicators, Expands Industry-leading Line of Current Sensors For Factory Automation

Ampflasher Current IndicatorsNK Technologies has introduced a new line of LED current indicators, complementing their existing portfolio of current sensing solutions for factory and building automation markets.  Marketed under the trade name AMPFlasher™, ACI Series current indicators offer a simple, safe, and inexpensive way to quickly and clearly see live current carrying conductors.

Read More

Easily Monitor High AC Current Loads with the ATS Current Transducer/Switch from NK Technologies

ATS Current Transducer/SwitchNK Technologies introduces the ATS Current Sensing Switch and Transducer. The ATS series is a one piece solution that combines a limit alarm with an analog output signal transducer to monitor produced or consumed AC current up to 1200 amps, while magnetically isolating outputs and inputs to maximize safety.

Read More

NK Technologies Unveils Redesigned, Expanded Line of AC Voltage Transducers

AC Voltage TransducersNK Technologies has redesigned and expanded its flagship line of voltage sensing products. VTR Series transducers feature a new, easy-to-mount 36.5mm wide DIN-rail compatible enclosure and expanded models for applications from 120V up to 500V.

Read More

NK Technologies Introduces New VTU-DIN Series: True RMS AC or DC Voltage Transducer in Space-saving Design

VTU-DIN Series TransducerNK Technologies introduces the VTU-DIN Series, a high-performance True RMS transducer for sensing voltage in single, three-phase or DC installations. The VTU-DIN measures 0-15 to 0-600 V with an industry standard output proportional to connected voltage in AC circuits with sinusoidal or non-sinusoidal (variable frequency) applications or DC circuits.
Read More

New VTU Voltage Transducer from NK Technologies Measures Circuit Voltages to 1200 Volts with Single Sensor

VTU Voltage TransducerNK Technologies introduces the VTU Voltage Transducer, which can measure AC or DC circuit voltages to 1200 volts with a single sensor. The sensor produces an analog signal directly proportional to the RMS voltage, making it an ideal tool for detecting power generation issues – such brown outs and phase loss – from both conventional and alternative sources.
Read More

New Easy-to-Install AT/ATR-MS Series Current Transducer From NK Technologies Accurately Monitors Loads Up to 800 Amps

ATR-MS Series Current TransducerNK Technologies introduces the AT/ATR-MS Series AC Current Transducer, combining AT/ATR-MS Series AC Current Transducers current sensing element and signal conditioner into a single package. The large, easy-to-install, split-core design allows for installation over existing conductors without the need to disconnect the load, even in applications with multiple conductors per phase.
Read More

New DC Current Transducer Remains Accurate Across Wider Range of Changing Temperatures

DT Series DC TransducerNK Technologies introduces the DT Series DC Current Transducer with ambient temperature compensation for increased usability and accuracy. The DT Series improved accuracy is due to a new patent-pending, microprocessor-based method of signal conditioning –  sensor output is automatically adjusted as temperature changes (e.g. installers do not need to add algorithms to adjust output as ambient temperature varies), eliminating one of the primary issues with Hall Elements-based products.
Read More

Control Energy Costs by Using the New APN Series Digital Power Monitor from NK Technologies

NK-Technologies-Blog-3-Phase-Power-MonitorsNK Technologies introduces the APN Series Power Monitoring Sensor. The APN Series Power Monitor measures three phases of current and voltage and computes fourteen values necessary to track power usage in the RS485 Modbus RTU format. The monitor uses current transformers to measure the amperes. The line voltage connects directly to the transducer, up to 600 VAC. 
Read More

Quickly and Easily Convert Any Standard Sensor Output to Modbus Format with New ADC Signal Converters from NK Technologies

NK Technologies Logo NK Technologies introduces ADC Series Analog to Digital Signal Converters. The ADC series readily accepts analog signals from up to eight loop or separately powered current, voltage, temperature or any other parameter sensor, and seamlessly converts them to a digital signal output that interfaces with the industry standard Modbus RTU digital protocol using a single network address.
Read More
  • Results per page:

of 1