The simple planetary gearbox comprises of the coaxial sun gear, planet carrier and outer gear sub-assemblies, and is combined with the planet gears rotating at constant centres about the planet carrier. The input is from the sun gear and the drive motion to the planet carrier is via the planet gears. The rolling contact of the planet gears with the outer gear provides the appropriate ratio.
1 = Sun gear (input shaft)
2 = Planet gear
3 = Outer gear
4 = Planet carrier (output shaft)
Multi-stage gearboxes are available by connecting the individual stages in sequence. Within the gear unit combination the individual stages are sized to their torque requirement.
The connection between motor and gearbox is made using a shrink disc bush without a keyway. For maximum performance we recommend the use of motors with reduced shaft tolerance and concentricity according to DIN 42955 R standards.
When fitting the motor, position the gearbox vertically with the motor flange upwards. Before assembly, degrease the motor shaft and the blind hole in the gearbox. Remove the lock screw or two plastic plugs from the motor flange of the gearbox, and insert a long Allen key to reach the tangential clamping screw in the coupling. The coupling must first be turned to the correct position for the screw to be accessible. Lower the motor vertically with the motor shaft in the blind hole. Ensure that the motor shaft has completely entered the bore, and that the flanges of motor and gearbox are in contact with each other over their full surface. The motor flange screws can now be inserted (do not tighten them completely). Then tighten the screws of the coupling with the required tightening torque. Do this in 3 steps alternately with 20%, 50% and then 100%.
The torque values for motor mounting can be accessed in our motor mounting manual, which is offered separately. Finish tightening the motor flange screws. After assembly, it is important to reinsert the lock screw or plastic plugs into their holes.
Whether we have MPRW Low Backlash Planetary Gearbox in stock in Boise Idaho or need to ship direct from VOGEL Antriebstechnik to any USA cities; ACTECHDRIVES.COM can get MPG Low Backlash Planetary Gearboxes to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some MPL Low Backlash Planetary Gearbox enabling us to further assist you in finding the correct MPV Low Backlash Planetary Gearboxes in the USA, Canada, or Mexico. It will be very helpful if you have the MPR Low Backlash Planetary Gearbox part numbers ready, then our sales representatives can provide you with a pricing and availability quote for MPRN Low Backlash Planetary Gearboxes that you are looking for in seconds. If you do not have the part numbers for MPRW Low Backlash Planetary Gearbox, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.