weidmuller blog

Clear Wiring for High-Density Signalling Levels

Weidmuller 3/26/2018

A large number of sensors monitor the production process. The terminal blocks are therefore particularly important for signal wiring. Klippon Connect initiator / actuator terminal blocks AIO allow for maximum wiring densities; up to four different potentials may connect on a width of only 3.5 mm.

Our signal wiring solutions are geared for future automation requirements and are available in many different designs. Due to a large number of variants, you benefit from maximum flexibility in the design of the signal feed. In combination with an I/O system, a particularly effective and safe potential distribution is achieved. Klippon Connect Sensor Actuator Terminal Blocks AIO optimise the distribution of initiator and actuator signals.

Your special advantages

• Coloured pusher to prevent miswiring
• Testing points for diagnostics of potentials at each contact point
• Many variants, e.g., for sensors or actuators with three or four conductors and with and without protective conductor connection
• PUSH IN technology for a tool-free connection of rigid conductors and conductors with wire end ferrules

Many variants
Whether it’s for three- or four-conductor initiators or actuators with and without a protective earth connection, we’ve got the perfect terminal block in our range.
 
Klippon Connect provides high-density wiring
Coloured pushers
Each conductor – positive, negative, signal or PE – has its own colour. Incorrect wiring is prevented, while installation and maintenance are made more efficient.
 
Klippon Connect provides high-density wiring
Check and test point
The different potentials can be tested at every contact point. Testing work in the panel is significantly sped up.
 
Klippon Connect provides high-density wiring
PUSH IN technology
Both rigid conductors and conductors with wire-end ferrules can be reliably connected directly and without the need for any tools. For maximum contact security in a minimum amount of time.