Frequency setting is F01 (Frequency setting 1). Please set the desired setting method.
* factory shipping setting value is F01 = 0 (Touch panel key operation).
In addition to this setting there are high-priority setting means (communication, multistage frequency, etc). For details, refer to "Control Block Diagram" in Frenic Mega User's Manual.
One Point Advice
- The voltage value to be input to the terminal , the current value input to the terminal [C1], the setting by the main unit volume can be set to an arbitrary range by the gain-bias setting. Detail is F18 (bias for frequency setting 1).
- The voltage value input to the terminal  and the current value input to the terminal [C1] can be filtered. Detail is C33 (Analog input adjustment - terminal  filter), and C38 (analog input adjustment - terminal [C1] filter).
- Frequency setting 1 (F01) And frequency setting 2 (C30) is switched using the "Hz 2 / Hz 1" terminal function. For the "Hz 2 / Hz 1" terminal function, E01-E09 , E98, E99. Refer to "Function selection of terminals [X1] - [X9], [FWD], [REV]".